Add like
Add dislike
Add to saved papers

Effect of Cooling Rate on Microstructure of In Situ TiC-Reinforced Composite Surface Layers Synthesized on Ductile Cast Iron by Laser Alloying.

Materials 2024 Februrary 18
The microstructure of the in situ TiC-reinforced composite surface layers developed during laser surface alloying of a ductile cast iron substrate with titanium was related to the solidification conditions in the molten pool. The solidification conditions were estimated using infrared thermography. It was found that the cooling rates of the melt up to about 700 °C/s enable the complete reaction between carbon and the entire amount of titanium introduced into the molten pool. In turn, the cooling rate of about 280 °C/s for the melt containing 8.0 wt% Ti allows the TiC particles to grow in the dendritic form with well-developed secondary arms and a total size of up to 30 µm. For a constant Ti content, the cooling rate of the melt had no effect on the TiC fraction. The increase in the cooling rate elevated the retained austenite fraction in the matrix material, lowering its hardness.

Full text links

We have located links that may give you full text access.
Can't access the paper?
Try logging in through your university/institutional subscription. For a smoother one-click institutional access experience, please use our mobile app.

Related Resources

For the best experience, use the Read mobile app

Mobile app image

Get seemless 1-tap access through your institution/university

For the best experience, use the Read mobile app

All material on this website is protected by copyright, Copyright © 1994-2024 by WebMD LLC.
This website also contains material copyrighted by 3rd parties.

By using this service, you agree to our terms of use and privacy policy.

Your Privacy Choices Toggle icon

You can now claim free CME credits for this literature searchClaim now

Get seemless 1-tap access through your institution/university

For the best experience, use the Read mobile app