Influence of Unit Water Content Control on Concrete Performance in the Ready-Mixed Concrete Production Process.

This study examined the effects of increasing concrete unit water content and artificially controlling water content on concrete performance in the production process of ready-mixed concrete. Results showed that changes in the unit water content of 20 concrete mix proportions without air-entraining significantly reduced concrete compressive strength, increased porosity, and in-creased occurrence of bleeding. A unit water content increase of 25 kg/m3 or more may reduce the compressive strength of concrete below the design standard and significantly affect the occurrence of bleeding water. Moreover, an extra unit water content of at least 25 kg/m3 could significantly affect the diffusion of chloride ions in the concrete. The carbonation depth of concrete was extremely high with the increase in unit water content and water addition. In the production of concrete requiring at least normal strength or durability, the extra water change to total unit water content should be maintained at 15 kg/m3 or less. And a water-cement ratio of 48% or less and a unit water content of 155 kg/m3 or less are considered effective for management of concrete quality. Considering the aggregate type, absorption rate, and moisture state, the management of unit water content error in concrete production processes requires greater.