Does Lumbar Interbody Fusion Modality Affect the Occurrence of Complications in an Osteoporotic Spine Under Whole-Body Vibration? A Finite Element Study.

OBJECTIVE: To evaluate the effects of 3 lumbar interbody fusion techniques on the occurrence of complications in an osteoporotic spine under whole-body vibration.

METHODS: A previously developed and validated nonlinear finite element model of L1-S1was modified to develop anterior lumbar interbody fusion (ALIF), posterior lumbar interbody fusion (PLIF), and transforaminal lumbar interbody fusion (TLIF) models with osteoporosis. In each model, the lower surface of the sacrum was absolutely fixed, a follower load of 400N was applied through the axis of the lumbar spine, and an axial sinusoidal vertical load of ±40N (5 Hz) was imposed on the superior surface of L1, to perform a transient dynamic analysis. The maximal values of intradiscal pressure, shear stress on annulus substance, disc bulge, facet joint stress, and screw and rod stress, along with their dynamic response curves, were collected.

RESULTS: Among these 3 models, the TLIF model generated the greatest screw and rod stress, and the PLIF model generated the greatest cage-bone interface stress. At the L3-L4 level, compared with the other 2 models, the maximal values and dynamic response curves of intradiscal pressure, shear stress of annulus ground substance, and disc bulge were all lower in the ALIF model. However, the facet contact stress at the adjacent segment in the ALIF model was higher than that in the other 2 models.

CONCLUSIONS: In an osteoporotic spine under whole-body vibration, TLIF has the highest risk of screw and rod breakage, PLIF has the highest risk of cage subsidence, and ALIF has the lowest risk of upper adjacent disc degeneration, but the highest risk of adjacent facet joint degeneration.