Adsorption of azo dye by biomass and immobilized Yarrowia lipolytica; equilibrium, kinetic and thermodynamic studies.

One of the major environmental problems we have today is dye pollution, primarily caused by the textile industry. This pollution has detrimental effects on aquatic life, soil fertility, and human health. Many microbial biosorbents have been documented in the literature for the removal of a wide range of azo dyes commonly employed in the textile industry. However, Yarrowia lipolytica NBRC1658 is firstly used as both free and immobilized sorbents for the removal of Reactive yellow 18 (RY18), acid red 18 (AR18) and basic blue 41 (BB41) in this study. The effect of experimental conditions such as pH, biosorbent quantity, dye concentration, contact time, and temperature on dye removal capacity are examined. The research findings demonstrate that the adsorption capacity is higher in biomass compared to immobilized cells. The highest adsorption capacities are observed at pH 2 for RY18 and AR18, while pH 9 is optimal for BB41. Increasing the adsorbent dosage and initial concentration significantly improves the adsorption capacity. The Langmuir model best describes the adsorption process, indicating that the dye attaches to the biosorbent in a single layer, with a uniform biosorbent surface. The removal of the dye occurs through a chemical process on the biosorbent surface, as evidenced by the pseudo-second-order kinetic model. According to thermodynamic analysis, higher temperatures promote greater adsorption of dyes. Our study shows the effectiveness of Yarrowia lipolyica NBRC1658 as a biosorbent in the removal of a wide range of industrial dyes.