Removal of Acetaminophen from Aqueous Solutions in an Adsorption Process.

Acetaminophen (C8 H9 NO2 , also called paracetamol) is an active metabolite of phenacetin with antipyretic and analgesic effects and has been extensively used as a painkiller. Currently, the problem of pharmaceuticals in water and sewage is common, especially in highly urbanized countries. Laboratory-scale experiments were carried out using an adsorbent-granulated activated carbon (WD-extra)-to remove acetaminophen (ACT) from water. The initial concentration of acetaminophen was 20 mg ACT/dm3 . The adsorption kinetics, influence of the pH on adsorption and dose of the used adsorbent were determined under batch conditions. The adsorption of ACT on activated carbon was more efficient when the water solution was acidic (at pH 2, it was the most effective). The highest percentage of removal (99%) was obtained for the WD-extra dose of 10.0 g/dm3 . The time taken to establish the dynamic equilibrium of the system was 60 min. The effectiveness of adsorption was determined based on the Freundlich and Langmuir adsorption isotherms. It was found that WD-extra activated carbon effectively removed ACT from water solutions.