Physico-chemical characterization and possible uses of sludge processed from an urban sewage treatment plant.

Nowadays, the challenge is to transform dehydrated sewage sludge resulting from wastewater treatment plants from waste into resource. Following this objective, the sludge was further dried and submitted to X-ray diffraction (XRD) and FTIR analysis. The sludge was first dried in ventilated and unventilated spaces at 50 ∘ C and 100 ∘ C, for 60 and 100 minutes (min) in each case. The final mass and evaporation degree of the sludge depends on the initial mass, ventilation type, drying time, and temperature. The ventilated drying space is preferred for temperature control, homogeneity, and higher evaporation degree. The influence of the drying process on the structure and behavior of the sewage sludge was emphasized through X-ray diffraction (XRD) and FTIR analysis. The XRD shows good structural properties of the sludge samples given by the reduction of the particle size through evaporation. According to FTIR, evaporation influences the depolymerization of the silicate network. The hydroxyl units and metallic ion modifiers can improve the sludge structure, but its intensity decreases through evaporation. With high content of solid substance, and good relation between the composition of the sludge and its structure and behavior, the dried sewage sludge can be used in: (i) agriculture, (ii) construction, (iii) the energy sector.