Inkjet printed IGZO memristors with volatile and non-volatile switching.

Solution-based memristors deposited by inkjet printing technique have a strong technological potential based on their scalability, low cost, environmentally friendlier processing by being an efficient technique with minimal material waste. Indium-gallium-zinc oxide (IGZO), an oxide semiconductor material, shows promising resistive switching properties. In this work, a printed Ag/IGZO/ITO memristor has been fabricated. The IGZO thickness influences both memory window and switching voltage of the devices. The devices show both volatile counter8wise (c8w) and non-volatile 8wise (8w) switching at low operating voltage. The 8w switching has a SET and RESET voltage lower than 2 V and - 5 V, respectively, a retention up to 105  s and a memory window up to 100, whereas the c8w switching shows volatile characteristics with a low threshold voltage (Vth < - 0.65 V) and a characteristic time (τ) of 0.75 ± 0.12 ms when a single pulse of - 0.65 V with width of 0.1 ms is applied. The characteristic time alters depending on the number of pulses. These volatile characteristics allowed them to be tested on different 4-bit pulse sequences, as an initial proof of concept for temporal signal processing applications.