An annular pulse forming line based on coaxial transmission lines.

The miniaturization, lightweight, and solidification of pulse forming lines (PFLs) are of prime significance during the evolution of pulsed power technology. In this paper, an all-solid-state annular pulse forming line (APFL) based on film-insulated coaxial transmission lines is developed to generate fast-rise time quasi-square pulses. First, a coiled coaxial transmission line (CCTL) comprised of multilayer polypropylene films with outstanding insulating properties is constructed. It can withstand direct current voltages up to 200 kV, with a cross section diameter of 7.4 mm. In addition, in order to turn the pulse transmission direction from circumferential to axial, a compact insulated terminal with a 90° bend structure is designed for CCTL. Although single terminal inductance can slow down the rising edge of the output pulse, their parallel connection in an APFL can weaken such an effect. The APFL, with a characteristic impedance of 2.95 Ω and a transmission time of 13 ns, is composed of three CCTLs with six terminals, which can run over 100 thousand times under the pulse voltage of 75 kV. Finally, 15 series APFL modules are employed to assemble a multi-stage PFL for the Tesla-type pulse generator. When charged to a voltage of 1 MV, the mixed PFL consisting of a coaxial line and the multi-stage PFL outputs quasi-square pulses with a voltage amplitude, rise time, and width of 510 kV, 4 ns, and 41.5 ns, respectively, and the fluctuation of the flat top is about 6%.