Model evaluation of rapid 4-dimensional lung tomosynthesis.

Purpose: This is an investigation of a lung motion digital tomosynthesis (DTS) model using combined stationary detector and stationary cold cathode x-ray sources at projection acquisition rates that exceed the present norms. The intent is to reduce anatomical uncertainties from artifacts inherent in thoracic 4-dimensional computed tomography (CT).

Methods and materials: Parameters necessary to perform rapid lung 4-dimensional DTS were studied using a conventional radiographic system with linear motion of the x-ray source and a simple hypothetical hardware performance model. Hypothetical rapid imaging parameters of sweep duration, projections per second, pulse duration, and tube current (mA) were derived on the basis of 0.5 mm and 1 mm motion captures per phase, 10 and 15 breaths per minute (bpm), 10 to 40 mm breathing amplitude, and 2 signal-to-noise ratio (SNR) levels. Anterior-posterior and lateral projection images of a normal size anthropomorphic thorax phantom with iodine contrast inserts were collected and reconstructed with an algebraic algorithm to study the effects of reduced x-ray output associated with field emission cold cathodes composed of carbon nanotubes or metal Spindt-type. Radiographic projections were collected at 3 SNR levels that were set at standard clinical DTS milliampere-seconds (mAs) and reduced corresponding to 50% and 25% standard DTS mAs to simulate a reduced x-ray output.

Results: The DTS SNR of the inserts was superior in all reconstructions at clinical mAs versus automatic exposure-control radiographs and superior in 3 of 4 at the 50% and 25% mAs levels. The most demanding performance parameters corresponding to 40 mm amplitude, 15 bpm, 0.5 mm motion capture limit, and 61 projections were sweep duration (10.4 msec), projection rate (5862 projections per second), pulse duration (0.161 msec), current 189 mA anterior-posterior, and 653 mA lateral.

Conclusions: Feasibility depends on the output performance of stationary cold cathode hardware being developed for DTS. Present image receptor technology can accommodate frame acquisition rates.