Veneer

Background: Fiber-reinforced composites (FRCs) have been proposed as an alternative to traditional metal alloys for the realization of frameworks in full-arch implant-supported prostheses. The aim of the present in vitro study was to evaluate the deflection under load of seven prostheses endowed with frameworks made of different materials, including different types of fiber-reinforced composites (FRCs). Methods: A master cast with four implant analogues in correspondence with the two lateral incisors and the two first molars was used to create full-arch fixed prostheses with the same shape and different materials...

BACKGROUND: This study evaluated the shear bond strength (SBS) of two different polyetheretherketone (PEEK) and CAD-CAM materials after aging. METHODS: A total of 42 frameworks were designed and milled from 2 different PEEK discs (Copra Peek, P and BioHPP, B). P and B frameworks were divided into 3 subgroups (n = 7). 14 slices were prepared each from feldspathic ceramic (Vitablocs Mark II, VM), hybrid nanoceramic (Cerasmart, CS), and polymer-infiltrated ceramic (Vita Enamic, VE) blocks...

OBJECTIVES: This 3D finite element analysis study aimed to investigate the effect of reinforcing CAD-CAM bars on stress distribution in various components of a posterior composite bridge. METHODS: A virtual model mimicking the absence of an upper second premolar was created, featuring class II cavity preparations on the proximal surfaces of the adjacent abutment teeth surrounding the edentulous space. Five distinct finite element analysis (FEA) models were generated, each representing a CAD-CAM reinforcing bar material: 3-YTZP (IPS...

STATEMENT OF PROBLEM: The surface topography of metal substrate can affect its bond to porcelain. A neodynium-doped yttrium aluminum garnet (Nd:YAG) laser has been introduced to modify the metal surface topography and improve porcelain bond strength. However, studies on the effect of laser etching on metal to porcelain bond strength are lacking. PURPOSE: The purpose of this in vitro study was to determine the effect of Nd:YAG laser etching on the surface roughness and wettability of and the porcelain bond strength to cobalt chromium (Co-Cr) substrate fabricated by milling and direct metal laser sintering (DMLS)...

STATEMENT OF PROBLEM: Evidence on the long-term clinical assessment and longevity of ceramic veneers bonded to different substrates is limited. PURPOSE: The purpose of this systematic review and meta-analysis was to evaluate the effect of various substrates, including enamel, dentin, or an existing composite resin restoration, on the clinical survival and complication rates of ceramic veneers. MATERIAL AND METHODS: The PubMed, Scopus, and the Cochrane Library electronic databases were searched, and related journals were hand searched without time or language restrictions to identify clinical trials that compared the survival rate and clinical complication rates when bonding ceramic veneers to different tooth substrates...

Objective: This article aims to review the safety and efficacy of the Er:YAG laser in debonding dental accessories. Methods: This review was conducted according to the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) statement. Articles published between 2010 and 2022 on the removal of dental accessories using erbium laser were searched. The selected articles were then classified according to the accessories used: adhesives, brackets, restorations, or implant crowns. Enamel surface roughness, shear bond strength, adhesive remnant index, duration time (t), pulp chamber temperature (T), morphology (M), and other variables were then noted...

BACKGROUND: Achieving an optimal shade match for these restorations is crucial for aesthetic outcomes. The thickness of zirconia/glass veneer and the choice of implant abutment material play vital roles in determining the final shade of implant restorations. MATERIALS AND METHODS: This study investigated the influence of zirconia/glass veneer thickness (0.5 mm and 1.0 mm) and implant abutment material (zirconia and titanium) on the final shade of implant restorations...

OBJECTIVES: This study compares the bacterial susceptibility to three different provisional restorations manufactured with different laboratory techniques, i.e., heat cure, CAD/CAM, and 3D printing. MATERIALS AND METHODS: Totally, 45 health patients with age group of 30-60 years undergoing complete veneer crown treatment were selected for the study and divided into three groups with 15 samples in each as Group I: the crowns were made from polymethyl methacrylate polymer fabricated by the conventional heat cure method, Group 2: the crowns were made from polymethyl methacrylate fabricated by subtractive manufacturing CAD/CAM method, and Group 3: the crowns were made from oligomers fabricated by additive manufacturing 3D printing...

OBJECTIVES: Clinical data on all-ceramic screw-retained implant crowns (SICs) luted on titanium base abutments (TBAs) over more than 3 years are sparse. This study aimed to evaluate the clinical performance and potential risk factors for these restorations. MATERIALS AND METHODS: Analysis took place based on the medical patient-records of three dental offices. Implant survival and prosthetic complications over time were evaluated. The study included SICs in premolar and molar regions made from monolithic lithium disilicate ceramic (M_LiDi) or veneered zirconia (V_ZiO) luted on a TBA documented over an observation time of at least 3 years...

The commercialization of modular timber products as cost-effective and lightweight components has resulted in innovative engineering products, e.g., glued laminated timber, laminated veneer lumber, I-beams, cross-laminated timber and solid timber joined with wedge joints. With the passage of time, timber structures can deteriorate, or new structural elements are required to increase the stiffness or load-bearing capacity in newly built structures, e.g., lintels over large-scale glazing or garages, or to reduce cross-sectional dimensions or save costly timber material while still achieving low weight...

This study investigated the fracture load of implant-supported zirconia crowns (IZCs), in which indirect composite resin or feldspathic porcelain was layered onto zirconia frameworks with mechanical retentive devices. Three different zirconia frameworks were assessed: attaching mechanical retentive devices on glaze and opaque porcelain materials (GL and OP groups, respectively), and no attaching mechanical retentive devices (ND group). The frameworks were layered using feldspathic porcelain (FP veneer) and indirect composite resin (IC veneer)...

STATEMENT OF PROBLEM: The type of veneer preparation is often chosen according to the patient's tooth structure and occlusion. Taking biomechanics into account in this decision-making process provides the clinician with more technical information on how to improve the clinical longevity of restorations. However, biomechanical analyses of veneer preparation designs are sparse. PURPOSE: The purpose of this 3-dimensional (3D) finite element analysis with microcomputed tomography (µCT) data obtained from realistic models was to assess the influence of different preparations for ceramic and composite resin veneers on restoration and resin layer stress distribution...

This case report details the esthetic rehabilitation of a 32-year-old male patient suffering from sleep bruxism, primarily manifesting as a fracture and significant loss of tooth structure in the anterior maxillary central incisors. To address these concerns, the patient underwent a restorative treatment involving the application of semidirect resin composite veneers on the maxillary incisors and direct resin composite restoration on the incisal regions of the maxillary canines. This approach not only restored the functional integrity of the teeth but also significantly enhanced the patient's esthetic appearance...

STATEMENT OF PROBLEM: Natural teeth are graded in terms of translucency and strength. Graded zirconia materials are now available with a higher yttria content on the top or in the enamel zone to increase surface translucency and a lower yttria content on the bottom or in the dentin zone to increase strength. Such materials could provide multiple advantages over uniform materials and reduce the need for porcelain veneering in anterior artificial crowns; however, studies on the properties of these materials are lacking...

OBJECTIVES: To assess the feasibility of producing 3D-printed intracoronal restorations, thin and ultrathin veneers, and to compare their mechanical behavior, accuracy, biological, and stain susceptibility to the currently applied milled restorations. MATERIALS AND METHODS: The databases were comprehensively searched for relevant records up to January 2024 without language restrictions. All studies that assessed 3D-printed partial coverage restorations including inlays, onlays, laminate, and occlusal veneers were retrieved...

Aim The aim of this study was to evaluate the shear bond strength between dual cure and light cure resin cements in root surface indirect restorations. Materials and methods Ten recently extracted human teeth were selected. Cylindrical blocks of resin were prepared and bonded near the Cemento-Enamel Junction (CEJ) of the prepared teeth to mimic the restoration at the root surface. The samples were randomly luted to the root surface using the light cure (Calibra Veneer, Dentsply Sirona, India) and dual cure (Fusion Ultra D/C, DenPro, USA) forming two groups...

OBJECTIVE: To describe a shift from injectable resin composite technique to composite resin computer-aided design and computer-aided manufacturing (CAD/CAM) veneers in addressing esthetic concerns associated with diastemas between anterior lower teeth in a clinical case. CLINICAL CONSIDERATIONS: Among several techniques proposed for direct resin composite restoration, the "Injectable resin composite technique" has gained popularity for its time-efficiency, reduced technique sensitivity, and diminished reliance on clinician skills...

INTRODUCTION: This study aims to investigate the effect of different particle sizes and pressures on the shear bond strength (SBS) and the roughness (Ra) of polyetheretherketone. MATERIALS AND METHODS: A total of 117 polyetheretherketone specimens were fabricated and divided into a control (CN: no air-particle abrasion) and eight pre-treatment groups (air-abraded with 50- or 110-μm Al2O3 particles at 1(A), 1.5(B), 2(C), and 2.5(D) bar). The adhesive, Visio...

BACKGROUND: The authors evaluated the prognostic factors associated with pulp status in patients with cracked teeth (CT) treated with occlusal veneer. METHODS: An analysis of 80 CT (71 patients) with 1 or more crack lines (CLs) and normal pulp vitality or reversible pulpitis was performed. All patients received occlusal veneer and their demographic and clinical data were recorded. Pulp status and clinical features were recorded at 1 week and posttreatment at 1, 2, 3, 6, 12, 18, and 24 months...

BACKGROUND: Implant-supported restorations have gained popularity in modern dentistry, and the choice of abutment material is crucial for their long-term success. This in vitro study aimed to evaluate the fracture resistance and failure mode of implant-supported restorations using different abutment materials. METHODS: Ninety standardized implant-supported restorations were included in the study. Abutments made of titanium, zirconia, and a hybrid material (titanium base with a zirconia veneer) were evaluated...