Perceptually Inspired C 0 -Continuity Haptic Shape Display with Trichamber Soft Actuators.

Shape display devices composed of actuation pixels enable dynamic rendering of surface morphological features, which have important roles in virtual reality and metaverse applications. The traditional pin-array solution produces sidestep-like structures between neighboring pins and normally relies on high-density pins to obtain curved surfaces. It remains a challenge to achieve continuous curved surfaces using a small number of actuated units. To address the challenge, we resort to the concept of surface continuity in computational geometry and develop a C0 -continuity shape display device with trichamber fiber-reinforced soft actuators. Each trichamber unit produces three-dimensional (3D) deformation consisting of elongation, pitch, and yaw rotation, thus ensuring rendered surface continuity using low-resolution actuation units. Inspired by human tactile discrimination threshold on height and angle gradients between adjacent units, we proposed the mathematical criteria of C0 -continuity shape display and compared the maximal number of distinguishable shapes using the proposed device in comparison with typical pin-array. We then established a shape control model considering the nonlinearity of soft materials to characterize and control the soft device to display C0 -continuity shapes. Experimental results showed that the proposed device with nine trichamber units could render typical sets of distinguishable C0 -continuity shape sequence changes. We envision that the concept of C0 -continuity shape display with 3D deformation capability could improve the fidelity of the rendered shapes in many metaverse scenarios such as touching human organs in medical palpation simulations.