Mechanics of wet adhesion in soft interaction with patterned morphology.

Locking surfaces with a wet interface can enhance interactions between a grasped object and a soft pad. This paper presents a mechanical approach to understanding the role of morphological design in achieving wet adhesion for secure grasping by a soft pad. Two conditions were compared in modeling wet interfaces between an object and a soft pad: a pad with a flat surface, and a pad with a micropatterned surface. The latter was designed and analyzed based on the wet attachment between the surface of a tree-frog's toes and its substrate. In this model, we proposed a method to estimate the contact force in both normal and tangential directions between a soft pad with a micropattern surface and a rigid flat surface substrate. A square mold containing 3600 85 μm × 85 μm cells interspaced by grooves 15 μm wide and 15 μm deep was fabricated, using e-beam technology, as the micropattern pad. The generated normal and tangential contact forces of the pad with a micropattern surface, and a pad with a flat surface were measured in both normal and tangential directions under wet conditions. Experimental results showed good agreement with theoretical results, indicating that the micropattern significantly enhanced the contact force of the pad by approximately two-fold for the normal and 1.2- to 1.4-fold for the tangential force. This theoretical approach can be potentially utilized to investigate the association of soft pad morphology with wet adhesion, and enhance efficient grasping by soft robotic hands in wet and high-moisture environments.