Combined photoelectrocatalytic microbial fuel cell (PEC-MFC) degradation of refractory organic pollutants and in-situ electricity utilization.

A new photoelectrocatalytic (PEC) and microbial fuel cell (MFC) process was developed and applied to simultaneously remove refractory organic pollutants (i.e., phenol and aniline) from wastewater while recovering energy for in-situ utilization. The current generated by the MFC process was applied to drive the PEC reaction. Compared with single PEC or MFC processes, the PEC-MFC combined process showed higher pollutant and chemical oxygen demand (COD) removal capacities and electricity production. Over 95% of the phenol or aniline was removed by these process, even at high initial concentrations. The COD removal efficiencies for phenol and aniline were ca. 96% (from 700 to 29 mg L-1 ) and 70% (from 165 to 49 mg L-1 ), respectively. Although the PEC process showed a limited contribution to phenol and aniline removals (16.5% and 43%, respectively), the utilization of PEC-treated phenol or aniline streams resulted in a MFC with higher voltage output, higher coulombic efficiency, maximal volumetric power density, and lower internal resistance as compared to untreated water. High-performance liquid chromatography coupled with mass spectrometry measurements revealed quinones/hydroquinones and low molecular weight organic acids to be produced as intermediates after the PEC process, which could improve the production of electricity in the MFC.