Optimization of coagulation pre-treatment for alleviating ultrafiltration membrane fouling: The role of floc properties on Al species.

This study investigated membrane fouling in a coagulation/ultrafiltration (C-UF) process by comparing the floc properties and humic acid (HA) removal efficiency of three hydrous Al(III) species (Ala , Alb , and Alc ). The results indicated that the coagulation and membrane mechanisms were different for all three Al species because of the differences in floc properties. The HA removal efficiency increased with increasing Al dosage until an equilibrium was reached at the optimal dosage of 6 mg L-1 . In addition, membrane fouling gradually decreased as the Al dosages increased. Regardless of coagulant type, the OH and COOH functional groups of HA reacted with the Al species. Both external and internal membrane fouling were strongly dependent on the porosity of the cake layer and on the size distribution of the floc particulates, respectively. The pore area of the cake layer formed by the Ala -coagulated effluent was large because of the strong charge neutralization. Moreover, Ala generated large and loose flocs with a porous cake layer that mitigated external fouling. However, the internal fouling with the Alc coagulant was significant because the concentration of residual aggregates in the membrane pores was high.