Foveal vision power errors induced by spectacle lenses designed to correct peripheral refractive errors.

PURPOSE: Radial Refractive Gradient (RRG) spectacles are lenses specifically designed to minimize peripheral hyperopic defocus typically found in conventional spectacles. Our goals were: (1) to demonstrate a method to design such lenses; and (2) to quantify the exact foveal vision power errors induced by them.

METHODS: The design procedure was based on a point-by-point sequential surface construction algorithm that designs a front aspheric surface (back surface is spherical) to achieve a given overall tangential focal length of the lens. A peripheral refraction model was built based on average peripheral refractive errors from a set of eyes. We designed four negative lenses with optical powers: -2.5, -5.0, -7.5 and -10.0 D, so that the tangential focal length of the lens matches the retinal conjugate surface.

RESULTS: The lenses induce very small sagittal power errors in a wide range of off-axis field angles (30°), solving the problem of peripheral hyperopic defocus. However, such designs introduce non-negligible mean power errors (above 0.25 D from 7°, 6.8°, 7.1° and 7.8° for the -2.5, -5.0, -7.5 and -10.0 D lenses, respectively) for foveal vision in a rotating eye.

CONCLUSION: Our results show the unavoidable errors introduced by RRG spectacles when used for dynamic foveal vision. The described method offers valuable information towards determining the best trade-off between controlling power errors for peripheral and foveal vision.