Preconcentration and partial separation of nitroaromatic vapors using a methyltrimethoxysilane-based sol-gel.

Typical trace vapor analysis involves sorbent trapping, followed by desorption and chromatographic separation. This communication describes a method for streamlining this process by combining sorbent sampling/preconcentration with partial separation achieved through temperature-programmed thermal desorption. A novel sorbent trap was formulated in which tubular glass liners for a programmable-temperature gas chromatograph inlet were coated with a sol-gel based polymer stationary phase synthesized from methyltrimethoxysilane precursor and installed into the inlet, which was directly connected to a mass-selective detector by a fused silica capillary transfer line. This method is shown to achieve partial separation of two nitroaromatic vapors in a total 3-5min analysis time, which represents a tenfold improvement in speed in terms of the overall cycle time compared to an analogous conventional vapor analysis method. Both analytes proved to have a high dynamic range and loading capacity, with nitrobenzene achieving both high and low sampling extremes (0.32ng-4μg sampling concentration) with only a slight compromise in peak broadening. The multivariate curve resolution by alternating least squares algorithm (MCR-ALS) was shown to successfully resolve the overlapped elution profiles of the two nitroaromatic test vapors examined in this study.