Development of passive samplers for in situ measurement of pyrethroid insecticides in surface water.

Pyrethroid insecticides are widely used in urban environments, and their occurrence has been recently associated with aquatic toxicity in urban surface streams. Synthetic pyrethroids are strongly hydrophobic compounds, highlighting the importance of the freely dissolved concentration (Cfree), rather than the total chemical concentration, for better prediction of potential effects in aquatic ecosystems. The goal of this study was to develop a simple, robust and field-applicable passive sampling methodology that may be used for in situ monitoring of trace levels of pyrethroids in surface water. Among a range of polymer films, polyethylene film (PE) was found to be the most efficient at absorbing pyrethroids from water. To circumvent the long equilibrium time, (13)C-permethrin and bifenthrin-d5 were preloaded on the PE sampler as performance reference compounds (PRC). Desorption of isotope-labeled PRCs was found to be isotropic to the absorption of target analytes. The optimized method was first tested in large circulating tanks simulating various environmental conditions. The derived Cfree values were consistently smaller than the total aqueous concentration in salt water or water containing humic acids. The PE samplers were further deployed at multiple field sites for 7 d in Southern California and analysis demonstrated good monitoring reproducibility and sensitivity under ambient environmental conditions. The developed passive sampler approach is ideal for application for in situ sampling under field conditions, and the use of PRCs allows sampling with short and flexible time intervals.