Nanoporous nanocomposite membranes via hybrid twin-screw extrusion-multijet electrospinning.

Non-woven nanoporous membranes of poly(caprolactone), PCL, incorporated with multi-walled carbon nanotubes, CNTs, could be fabricated via an industrially-scalable hybrid twin screw extrusion and electrospinning process. The utilization of a spinneret with multiple nozzles allowed the increase of the flow rate beyond what is possible with conventional electrospinning using a single nozzle, albeit at the expense of difficulties in the control of the thickness distributions of the nanofibrous membranes. The thickness and orientation distributions and the resulting mechanical properties of the membranes could be modified via changes in voltage, angular velocity of the collector mandrel and separation distance of the collector from the spinneret. The increases in crystallinity due to the presence of the CNTs and the preferential alignment of the nanofibers via rotation of the collecting mandrel led to increases in the tensile properties of the nanoporous membranes. The use of poly(ethylene oxide), PEO, together with PCL, followed by the dissolution of the PEO, rendered the nanofibers themselves nanoporous with typical surface porosity values of around 50% and pore sizes of about 220 nm. The demonstrated versatility of the hybrid twin screw extrusion and electrospinning process and the manipulation of mesh dimensions and properties are indicative of the applicability of the hybrid process for fabrication of nanoporous membranes for myriad diverse industrial applications ranging from water treatment to tissue engineering applications.