Stabilization of the GeO 2 /Ge Interface by Nitrogen Incorporation in a One-Step NO Thermal Oxynitridation.

The thermal instability of GeO2 /Ge structures lasts as a barrier against the development of Ge-based metal-oxide-semiconductor devices. In the present work, stabilization was achieved through the incorporation of nitrogen into the oxide layer by thermally growing GeOx Ny films in NO. With this approach, a stable layer is obtained in a single step as opposed to other nitridation techniques (like plasma immersion) which require additional processing. Significant reduction of GeO desorption from the surface and a strong barrier against additional substrate oxidation were obtained by the insertion of a small amount of nitrogen content (N/O ≈ 10%). Nuclear reaction analysis and profiling showed that nitrogen incorporation and removal occur simultaneously during film growth, yielding N to be distributed throughout the whole film, without accumulation in any particular region. Both the oxidation barrier and the lower GeO desorption rate are explained by a reduction of vacancy diffusivity inside the dielectric. This is not caused by the densification of the oxide, but is a consequence of nitrogen blockage of oxygen vacancy diffusion paths.