Interventional Removal of Intravascular Medical Devices: Methods and Technical Success.

PURPOSE: Evaluation of the technical success rate and complications when retrieving dislocated intravascular foreign bodies.

MATERIAL AND METHODS: Between 1999 and 2015 38 patients (21 female; 17 male; Age: 17 - 92; Average 54.3 years) underwent an extraction of intravascular dislocated foreign bodies, which were not lost during a radiological intervention. The extracted material included 29 port catheters, 3 tips of tunneled dialysis catheters, 2 stents, 2 guide wires, 1 CVC tip and 1 AS occluder device. Various catheters for repositioning and extraction were used. The access was transarterial as well as transvenous. Technical success was defined as complete removal of the foreign body.

RESULTS: The technical success rate was 92.1 % (35 of 38). In 17 patients an additional catheter was necessary to reposition the foreign body in order to make it accessible for the extraction catheter. In one case a stent was relocated and remodeled within the patient and was not extracted. In another case we experienced a dislocation of a small fragment of the port catheter into the distal parts of the pulmonary artery, which couldn't be extracted. A guide wire could not be extracted as it was already adhered with the vessel wall. Peri-interventional complications were not documented.

CONCLUSION: The percutaneous extraction of dislocated intravascular foreign bodies is technically successful and poor of complications. Interventional therapy can avoid surgical removal.

KEY POINTS: • The percutaneous extraction of dislocated intravascular foreign bodies is technically successful and safe.• In most cases surgical removal can be avoided.• The gooseneck-snare catheter was mainly used for the extraction of intravascular foreign bodies. Citation Format: • Ayx I, Goessmann H, Hubauer H et al. Interventional Removal of Intravascular Medical Devices: Methods and Technical Success. Fortschr Röntgenstr 2016; 188: 566 - 573.