In vitro study of the antibacterial properties and impact strength of dental acrylic resins modified with a nanomaterial.

STATEMENT OF PROBLEM: The accumulation of bacteria on the surface of dental prostheses can lead to systemic disease.

PURPOSE: The purpose of this in vitro study was to evaluate the growth of Staphylococcus aureus and Pseudomonas aeruginosa on the surface of autopolymerizing (AP) and heat-polymerizing (HP) acrylic resins incorporated with nanostructured silver vanadate (β-AgVO3) and its impact strength.

MATERIAL AND METHODS: For each resin, 216 circular specimens (9 × 2 mm) were prepared for microbiologic analysis and 60 rectangular specimens (65 × 10 × 3.3 mm) for mechanical analysis, according to the percentage of β-AgVO3: 0%, control group; 0.5%; 1%; 2.5%; 5%; and 10%. After a biofilm had formed, the metabolic activity of the bacteria was measured using the XTT reduction assay (2,3-bis-(2-methoxy-4-nitro-5-sulfophenyl)-2H-tetrazolium-5-carboxanilide) (n=8), and the number of viable cells was determined by counting colony forming units per milliliter (CFU/mL) (n=8). Confocal laser scanning microscopy (CLSM) was used to complement the analyses (n=2). The mechanical behavior was evaluated by impact strength assays (n=10). Data were analyzed by 2-way ANOVA, followed by the Tukey honestly significant difference (HSD) post hoc test (α=.05).

RESULTS: The addition of 5% and 10% β-AgVO3 significantly decreased the metabolic activity of P. aeruginosa for both resins (P<.05). The HP resin promoted a greater reduction in metabolic activity than the AP resin (P<.05). No difference was found in the metabolic activity of S. aureus according to the XTT (P>.05). The number of CFU/mL for S. aureus and P. aeruginosa decreased significantly when 5% and 10% β-AgVO3 were added (P<.001). These concentrations significantly reduced the impact strength of the resins (P<.001) because the system was weakened by the presence of clusters of β-AgVO3.

CONCLUSION: The addition of β-AgVO3 can provide acrylic resins with antibacterial activity but reduces their impact strength. More efficient addition methods should be investigated.