Rotors

The rotational spectra of two valine methyl ester (ValOMe) conformers have been measured using a cavity-based Fourier-transform microwave spectrometer in the range of 9-18 GHz. Ten conformers of ValOMe were modeled using the ωB97XD/6-311++G(d,p) level of theory, and separate spectra arising from two lowest-energy conformations were observed and assigned. 44 rotational transitions were assigned to conformer I, the lowest-energy configuration, and were fit to Watson's A -reduced Hamiltonian: A = 2552.0145(5) MHz, B = 1041...

Many artificial molecular machines have been synthesized, and various functions have been expressed by changing their molecular conformations. However, their structures are still simple compared with those of biomolecular machines, and more energy is required to control them. To design artificial molecular machines with more complex structures and higher functionality, it is necessary to combine molecular machines with simple movements such as components. This means that the motion of individual molecular machines must be precisely controlled and observed in various environments...

New ideal-gas thermochemistry C p ° ( T ), H °( T ), S °( T ), and G °( T ) are predicted for 53 species involved in the thermal destruction of perfluorinated sulfonic acids (PFSAs) ranging from C2 to C8 in perfluorinated alkyl chain length. Species were selected by considering both the pyrolytic and oxidative pathways of PFSA destruction. After the sulfur-containing moieties are removed, subsequent reactions largely involve species from a prior set of thermochemistry for the thermal destruction of perfluorinated carboxylic acids (Ram et al...

The integrity of the protective mucus layer as a primary defense against pathogen invasion and microbial leakage into the intestinal epithelium can be compromised by the effects of antibiotics on the commensal microbiome. Changes in mucus integrity directly affect the solvent viscosity in the immediate vicinity of the mucin network, i.e., the nanoviscosity, which in turn affects both biochemical reactions and selective transport. To assess mucus nanoviscosity, a reliable readout via the viscosity-dependent fluorescence lifetime of the molecular rotor dye Cy3 is established and nanoviscosities from porcine and murine ex vivo mucus are determined...

In this paper, a new non-contact rotary piezoelectric energy harvester based on a sinusoidal exciting mechanism has been proposed. The energy transformation is realized in a non-contact form. The sinusoidal orbital rotor can act as a sinusoidal excitation to the contacts, and it can avoid damage to piezoelectric ceramics from direct strikes while bending piezoelectric cantilever beams. After a series of experiments, the prototype demonstrated an excellent output performance. Having explored the influence of the rotation speed on the output voltage, it reaches the peak when the rotation speed is 180 rpm and the maximum voltage is 18...

The microviscosity of intracellular environments plays an important role in monitoring cellular function. Thus, the capability of detecting changes in viscosity can be utilized for the detection of different disease states. Viscosity-sensitive fluorescent molecular rotors are potentially excellent probes for these applications; however, the predictable relationships between chemical structural features and viscosity sensitivity are poorly understood. Here, we investigate a set of arylcyanoamide-based fluorescent probes and the effect of small aliphatic substituents on their viscosity sensitivity...

Electrical steels are widely used in the electrical industry in the construction of many devices, e.g., power transformer cores and distribution transformers. An important parameter of electrical components that determines the efficiency of devices is energy loss during remagnetization. These losses are influenced, among other factors, by steel cutting processes. The common techniques for cutting electrical materials on industrial lines are mechanical cutting and laser cutting. High-pressure abrasive water jet (AWJ) cutting, unlike the technologies mentioned above, can ensure higher quality of the cut edge and limit the negative impact of the cutting process on the magnetic properties of sheet metal...

The rotor or impeller is a rotational and key part of a pump and compressor. This article presents the detailed development process of a rotor of small size constructed from an EN8 steel cylindrical blank using a novel technique based on a computer numerical control engraving milling machine (CNC-EMM) equipped with a 4 mm tungsten carbide end mill cutter. We fabricated a total of twenty-eight stepped rotors following the Box-Behnken Design (BBD) DoE technique at fourteen distinct combinations of CNC-EMM variable parameters, namely rotational speed, feed, and plunge feed...

Most casual socks are produced from cotton and are usually combined with synthetic fibers. The suitability of viscose and lyocell fibers for knitting socks needs to be investigated further. Therefore, three series of plain socks were produced, composed in the largest content from single-spun viscose or lyocell yarns fully plated with texturized polyamide 6.6 multifilament yarn. The quality of three types of main yarns manufactured by ring, open-end rotor, and air-jet spinning processes and two types of polyamide plating yarns used in the production of socks were assessed together with the structural, usage, and comfort quality of the socks before and after simulating household laundering...

Low cost and strong fluorescence emission are two important guarantees for luminogens used as light conversion agents. By one-pot multicomponent approach and inexpensive starting materials, three dicyanopyridine (DP) derivatives named as DCP (2-amino-6-methoxy-4-phenylpyridine-3,5-dicarbonitrile), DCO (2-amino-6-methoxy-4-(4-methoxyphenyl) pyridine-3,5-dicarbonitrile) and DCC (2-amino-4-(4-cyanophenyl)-6-methoxypyridine-3,5-dicarbonitrile) were designed and synthesized. Meanwhile, the ACQ-to-AIE transformation was successfully realized by altering substituent groups rather than traditional rotor-stator theory...

The characteristic frequency of a rub-impact fault is usually very complex and may contain higher harmonics and subharmonics. Due to the uncertainty of harmonic components and the complexity of signal-to-noise ratio (SNR) operation, the general scale transformation stochastic resonance (GSTSR) has certain limitations in the identification of rub-impact faults. To solve this problem, the paper starts with complexity and proposes a rub-impact fault identification method combining a swarm intelligence optimized algorithm (SIOA) with Hjorth parameters and GSTSR...

We show that covalent labelling of sialic acids on live cell surfaces or mucin increases the fluorescence of the fluorescence molecular rotors (FMRs) CCVJ, Cy3 and thioazole orange, enabling wash-free imaging of cell surfaces. Dual labelling with an FMR and an environmentally insensitive dye allows detection of changes that occur, for example, when cross-linking is altered.

Glioblastoma is the most fatal and insidious malignancy, due to the existence of the blood-brain barrier (BBB) and the high invasiveness of tumor cells. Abnormal mitochondrial viscosity has been identified as a key feature of malignancies. Therefore, this study reports on a novel fluorescent probe for mitochondrial viscosity, called ZVGQ, which is based on the twisted intramolecular charge transfer (TICT) effect. The probe uses 3-dicyanomethyl-1,5,5-trimethylcyclohexene as an electron donor moiety and molecular rotor, and triphenylphosphine (TPP) cation as an electron acceptor and mitochondrial targeting group...

Triphenyl phosphane (TPP) and an epoxide as a fuel system transiently transformed a non-catalytic six-component turnstile into a four-component catalytic rotor releasing N -methyl pyrrolidine and a copper(I) complex. The two latter compounds acted synergistically as catalysts to perform first a Michael addition and then a 5- exo-dig cyclization, giving rise to dissipative sequential catalysis.

This paper is focused on the diagnostics of multicopter UAV propulsion system, in which the temporary transient states occur during operation in faulty conditions (eg. not all motor phases working properly). As a diagnostic sensor, the piezo strip has been used, which is very sensitive to any vibrations of the multi-rotor frame. The paper concerns the precise location of the sensor for more effective monitoring of the propulsion system state. For this purpose, a nonlinear analysis of the vibration times series was carefully presented...

The shear stress transport turbulence model is employed to conduct a detailed study of flow characteristics at the highest efficiency point and near-stall point in a full-channel 1.5-stage compressor in this paper. The simulation results for the compressor's total pressure ratio and efficiency exhibit good agreement with experimental data. Emphasis is placed on examining the internal flow structure in the tip area of the compressor rotor under near-stall conditions. The results reveal that significant differences in flow structure primarily occur in the tip area as the compressor approaches stall...

BACKGROUND: Mitophagy plays indispensable roles in maintaining intracellular homeostasis in most eukaryotic cells by selectively eliminating superfluous components or damaged organelles. Thus, the co-operation of mitochondrial probes and lysosomal probes was presented to directly monitor mitophagy in dual colors. Nowadays, most of the lysosomal probes are composed of groups sensitive to pH, such as morpholine, amine and other weak bases. However, the pH in lysosomes would fluctuate in the process of mitophagy, leading to the optical interference...

In a DFIG grid interconnected system, the control of real and reactive power relies on various factors. This paper presents an approach to regulate the flow of real and reactive power using a Neural Tuning Machine (NTM) based on a recurrent neural network. The focus is on controlling the flow of reactive power from the rotor-side converter, which is proportional to the grid-side controller through a coupling voltage. The proposed NTM method leverages neural networks to fine-tune the parameters of the PI controller, optimizing performance for DFIG grid integration...

The synthesis of dynamic chiral lanthanide complex emitters has always been difficult. Herein, we report three pairs of dynamic chiral EuIII complex emitters (R/S-Eu-R-1, R = Et/Me; R/S-Eu-Et-2) with aggregation-induced emission. In the molecular state, these EuIII complexes have almost no obvious emission, while in the aggregate state, they greatly enhance the EuIII emission through restriction of intramolecular rotation and restriction of intramolecular vibration. The asymmetry factor and the circularly polarized luminescence brightness are as high as 0...

The combination of fluorogenic probes (fluorogens) and self-labeling protein tags represent a promising tool for imaging biological processes with high specificity but it requires the adequation between the fluorogen and its target to ensure a good activation of its fluorescence. In this work, we report a strategy to develop molecular rotors that specifically target HaloTag with a strong enhancement of their fluorescence. The divergent design facilitates the diversification of the structures to tune the photophysical and cellular properties...