Dual mobility tha

BACKGROUND: Patients undergoing primary total hip arthroplasty (THA) who have spinal deformity and a stiff spine are the highest-risk group for instability. Despite the increasing use of dual-mobility cups and large femoral heads, dislocation remains a major complication after THA. Preoperative planning becomes a critical aspect of ensuring precise component positioning within a safe zone. The purpose of this study was to investigate dislocation rates over a 9-year period. METHODS: A retrospective review of 4,731 THAs performed by three orthopaedic surgeons between January 2014 and March 2023 was performed...

AIMS: Dislocation remains a leading cause of failure following revision total hip arthroplasty (THA). While dual-mobility (DM) bearings have been shown to mitigate this risk, options are limited when retaining or implanting an uncemented shell without modular DM options. In these circumstances, a monoblock DM cup, designed for cementing, can be cemented into an uncemented acetabular shell. The goal of this study was to describe the implant survival, complications, and radiological outcomes of this construct...

INTRODUCTION: While dual mobility systems in total hip replacements have demonstrated reduced dislocation and revision occurrences, concerns persist about the potential elevation of metal ions in the bloodstream, leading to negative tissue reactions. Notably, there's a scarcity of research spanning over five years post-surgery that examines cobalt and chromium levels after such implants. This study aimed to delve into these metal ion concentrations after a five-year period, building on previous metal-ion findings...

INTRODUCTION: Isolated ball and liner exchanges (IBLE) can be performed to increase hip joint stability, but historical results have been mixed due to a lack of head size options or dual mobility articulations. The purpose of this study was to evaluate the contemporary results of isolated ball and liner exchanges in patients who have instability following primary THA. METHODS: We retrospectively reviewed 65 primary THAs from 2016 to 2020 with hip instability undergoing isolated ball and liner exchange or conversion to dual mobility articulation...

PURPOSE: The aims of this study were to evaluate the survivorships of a new generation cementless DMC with tripod additional fixation in revision total hip arthroplasty and complications at a minimum five year follow-up. METHODS: One hundred and fifteen revisions (THA) treated with tripod DMC performed between 2009 and 2015 were included in this retrospective study. Acetabular defects were classified as Paprosky 1 (n = 38, 33%), 2 (n = 75, 65%) or 3 (n = 2, 2%)...

BACKGROUND: A recent National Joint Registry report suggests a higher local complication risk for dual-mobility (DM) total hip arthroplasty (THA) compared to conventional articulation THA. This report may be subject to data heterogeneity with multiple confounders. Controlling for these factors by matching demographic characteristics may give different results. We aim to compare 2-year local complication rates between matched DM and conventional THAs in primary hip osteoarthritis. METHODS: Data were collected for consecutive primary THAs undertaken via a posterior approach...

AIMS: Modular dual-mobility (DM) articulations are increasingly used during total hip arthroplasty (THA). However, concerns remain regarding the metal liner modularity. This study aims to correlate metal artifact reduction sequence (MARS)-MRI abnormalities with serum metal ion levels in patients with DM articulations. METHODS: A total of 45 patients (50 hips) with a modular DM articulation were included with mean follow-up of 3.7 years (SD 1.2). Enrolled patients with an asymptomatic, primary THA and DM articulation with over two years' follow-up underwent MARS-MRI...

AIMS: The benefit of a dual-mobility acetabular component (DMC) for primary total hip arthroplasties (THAs) is controversial. This study aimed to compare the dislocation and complication rates when using a DMC compared to single-mobility (SM) acetabular component in primary elective THA using data collected at a single centre, and compare the revision rates and survival outcomes in these two groups. METHODS: Between 2010 and 2019, 2,075 primary THAs using either a cementless DM or SM acetabular component were included...

PURPOSE: Dislocation remains 1 of the leading causes of revision after primary total hip arthroplasty (THA) and there is clear evidence the dual-mobility (DM) is used more frequently to minimise this. But in smaller cups, whether the use of DM with smaller 22-mm heads imparts any increased stability compared to standard bearing is unknown; especially when those smaller cups now allow for large single-bearing (SB) heads. METHODS: 3 primary cup sizes (48 mm, 50 mm, 52 mm) were chosen a priori for modelling...

INTRODUCTION: Conversion of hip arthrodesis to total hip arthroplasty (THA) is an effective but challenging procedure to restore hip functionality and improve quality of life. Herein, a case of arthrodesis takedown to a dual mobility THA with a custom-made 3D-printed cup. PRESENTATION OF CASE: Due to higher risk of instability and loosening for the altered and atrophic anatomy, a custom-made highly-porous titanium dual mobility monobloc cup has been used for a cementless conversion THA in 31-year-old patient with hip arthrodesis...

INTRODUCTION: The combination of a central fracture-dislocation of the hip, acetabulum fracture, and neck of the femur fracture is a rare injury, with a few reports described in the literature. Guidelines regarding managing this type of injury in single or multiple stages, the requirement of acetabular augmentation with plates, metal rings or cages, and the implant selection in elderly patients are not adequately defined while planning a total hip arthroplasty (THA). The successful management of such a complex fracture pattern in an elderly patient with neurodegenerative disorder is described in our case report...

INTRODUCTION: Dual-mobility (DM) implants for total hip arthroplasty (THA) have gained popularity due to their potential to reduce hip instability and dislocation events that may lead to revision surgery. These implants consist of a femoral head articulated within a polyethylene liner, which articulates within an outer acetabular shell, creating a dual-bearing surface. Our study aimed to report our observations on the survivorship of a novel DM implant for primary total hip arthroplasty at two years...

INTRODUCTION: Performing total hip arthroplasty (THA) after failed internal fixation of proximal femoral fractures (PFF) is known to be associated with high rates of complications. Dual mobility cups (DMC) are known to lower dislocation events in high-risk patients. Very few reports investigated the outcomes of THA using DMC following failure of internal fixation for PFF. METHODS: This is a retrospective monocentric continuous study of 31 patients who underwent THA with DMC after failed internal fixation of PFF...

BACKGROUND: The utilization of a different manufacturer for the prosthetic femoral head and the polyethylene insert in dual mobility (DM) for total hip arthroplasty (THA) may be necessary, especially in the revision setting. However, there is no data in the literature about this application. This study evaluated the outcomes of mixed manufacturer components, with the hypothesis that there would be no difference in measured outcomes compared to matched components. METHODS: The DM articulations implanted during THA revision were retrospectively reviewed from 2011-2017...

INTRODUCTION: Total hip arthroplasty (THA) is a common procedure used to treat various hip conditions. However, patients with ochronotic arthropathy, a rare genetic disorder characterized by the abnormal accumulation of homogentisic acid, are at a higher risk of post-surgical dislocation and instability due to poor bone quality and joint degeneration. CASE REPORT: This case study features a 52-year-old male patient diagnosed with ochronotic arthropathy who underwent bilateral THA with the use of a dual mobility cup (DMC)...

OBJECTIVES: Dislocation rate of total hip arthroplasty (THA) can be as high as 20% for patients with fracture neck of femur, which is a disastrous complication in these vulnerable patients. Numerous techniques, including bipolar arthroplasty and constrained liner, have been adopted to minimize the risk of dislocation. We aimed to evaluate the role of dual mobility Cups in treating patients with fractures of the femoral neck with high risk of postoperative dislocation due to neuromuscular instability disorders...

PURPOSE: The objective of this study was to analyze the results from a cohort of patients who underwent a revision total hip arthroplasty (THA) using a dual mobility cup (DMC) implant. MATERIALS AND METHODS: A retrospective review of revised THAs was conducted using the database from a single tertiary referral hospital. A total of 91 revision THAs from 91 patients were included in the study. There were 46 male hips and 45 female hips. The mean age was 56.3±14...

BACKGROUND: Femoral stem design affects periprosthetic bone mineral density (BMD), which may impact long-term survival of cementless implants in total hip arthroplasty (THA). The aim of this study was to examine proximal femoral BMD in 3 morphologically different uncemented femoral stem designs to investigate whether any particular design resulted in better preservation of BMD. METHODS: A total of 119 patients were randomized to receive a proximally coated collarless dual-taper wedge stem, a proximally coated collarless anatomic stem, or a fully coated collarless triple-taper stem...

Total hip replacement arthroplasty (THA) in hip dysplasia patients has a higher dislocation rate than in patients with simple hip osteoarthritis due to anatomical deformation. Therefore, to reduce postoperative THA dislocation is the challenge for arthroplasty surgeons. From 2015 to 2020, 1525 patients underwent THA performed by two surgeons at a single institution. A total of 152 patients involving 172 THAs were included. The patients were classified into dual-mobility (DM) and fixed-bearing (FB) acetabular cup groups...

BACKGROUND: Femoral neck fracture is a common posttraumatic injury in the elderly. Currently, orthopedic surgeons conducting total hip arthroplasty (THA) for hip fractures have various prosthetic alternatives. Dual-mobility cup THA is recommended for hip fracture patients to reduce prosthesis dislocation. Therefore, the goal of this research is to evaluate the effectiveness of conventional prostheses against dual-mobility prostheses in treating femoral neck fractures in two groups of patients...