BET

Antibiotics are widely used in medicine, but they are not fully metabolized in the body and can end up in wastewater. Conventional wastewater treatment methods fail to completely remove antibiotic residues, which can then enter rivers and streams. Adsorption is a promising technique for removing antibiotics from wastewater, even at low concentrations. The successful one-pot synthesis of an adsorbent, iron-containing porphyrin-based porous organic polymer (Fe-POP), was achieved through the reaction of pyrrole groups and terephthalaldehyde in the presence of FeCl3 ...

How to realize efficient treatment of coal slime generated by a coal washing operation is an urgent problem to be solved in this industry. The presence of clay minerals, especially highly hydrophilic montmorillonite (MMT), is the key to the poor treatment effect of coal slime. Polyacrylamide (PAM) is very popular as a polymer agent to improve the treatment of coal slime. However, when it is used to treat coal slime with a high content of MMT, the selection of PAM type and the mechanism of action are still lacking...

Loss of PTEN tumor suppressor is an important event during colorectal cancer (CRC) development and is a target for therapeutic exploitation. This study reports that bromodomain and extra-terminal motif (BET) is a synthetic lethal partner of PTEN in CRC. BET inhibition (BETi) selectively induced G1 cell cycle arrest and apoptosis in PTEN-/- CRC. Further, BETi selectively and dose-dependently suppressed the growth of PTEN-/- CRC tumor xenografts in mice and patient-derived organoids. Mechanistically, PTEN-deficient CRC cells elevated the level of cytoplasmic p21CIP1/WAF1 that is hyper-phosphorylated at Thr145 by AKT...

Carbons form critical components in biogas purification and energy storage systems and are used to modify polymer matrices. The environmental impact of producing carbons has driven research interest in biomass-derived carbons, although these have yield, processing, and resource competition limitations. Naturally formed fungal filaments are investigated, which are abundantly available as food- and biotechnology-industry by-products and wastes as cost-effective and sustainable templates for carbon networks. Pyrolyzed Agaricus bisporus and Pleurotus eryngii filament networks are mesoporous and microscale with a size regime close to carbon fibers...

The growing textile industry produces large volumes of hazardous wastewater containing dyes, which stresses the need for cheap, efficient adsorbing technologies. This study investigates a novel preprocessing method for producing activated carbons from abundantly available softwood bark. The preprocessing involved a continuous steam explosion preconditioning step, chemical activation with ZnCl2 , pyrolysis at 600 and 800 °C, and washing. The activated carbons were subsequently characterized by SEM, XPS, Raman and FTIR prior to evaluation for their effectiveness in adsorbing reactive orange 16 and two synthetic dyehouse effluents...

In the present work, the biomass of Aspergillus flavus (AF) was modified using magnetic nanoparticles MnFe2 O4 and metal-organic framework of ZIF-67, and its ability to remove tetracycline antibiotic (TCH) was investigated. With the help of physicochemical tests, AF biomass modification with ZIF-67 and MnFe2 O4 magnetic nanoparticles was confirmed. Based on the BET value, AF-MnFe2 O4 -ZIF-67 (139.83 m2 /g) has a higher surface value than AF (0.786 m2 /g) and AF/MnFe2 O4 (17.504 m2 /g). Also, the magnetic saturation value revealed that the modified biomass can be isolated from the treated solution using a simple magnetic field...

This study aims to remove Congo red dye from industrial effluent using economical agriculturally-based nano-biosorbents like magnetic orange peel, peanut shells, and tea waste. The nano-biosorbents were characterized by various analytical techniques like SEM, FT-IR, BET and XRD. The highest adsorption capacity was obtained under the following ideal conditions: pH = 6 (orange peel and peanut shells), pH = 3 (tea waste), and dosages of nano-biosorbents with varying timeframes of 50 min for tea waste and peanut shells and 30 min for orange peel...

OBJECTIVE: The aim of the study was to trace the development of surgical therapy in a large cohort, examine its changes at one single institution that has been specializing in salivary gland pathologies over the last 22 years, and to determine the extent to which a possible shift in the surgical therapy of parotid benign tumors towards less radical methods was correlated with a change in the incidence of facial palsy and Frey's syndrome. STUDY DESIGN: Retrospective clinical study...

BACKGROUND AND AIMS: Since the COVID-19 outbreak, people's habits changed radically. In fact, to limit the spread of SARS-CoV-2, governments implemented restrictive measures that influenced the lives of individuals. The aim of this systematic review is to analyze the impact of COVID-19 on gambling by examining three different outcomes: frequency, expenditure, and transition among possible types of gambling. METHODS: All studies assessing the impact of restrictive measures implemented to limit the spread of SARS-CoV-2 on gambling were included...

Textile effluent discharge can negatively impact the environment and living organisms due to its potential toxicity, higher percentages of total organic carbon (TOC) contents, and so on. The study investigates the extraordinary performance of the electrocoagulation process (ECP) combined with powdered activated carbon (PAC) as a highly effective and environmental friendly method of treating textile effluents. This scientific work mainly includes the focus on removing toxic components in textile effluents, such as high concentrations of colour and TOC using synthesized PAC derived from coconut shells coupled with the ECP (ECP-PAC)...

Crohn's and ulcerative colitis are common conditions associated with inflammatory bowel disease as well as intestinal flora and epithelial barrier dysfunction. A novel fermented Lactobacillus brevis (AL0035) herein assayed in a trinitro benzene sulfonic acid (TNBS)-induced colitis mice model after oral administration significantly counteracted the body weight loss and improves the disease activity index and histological injury scores. AL0035 significantly decreased the mRNA and protein expression of different pro-inflammatory cytokines (TNFalpha, IL-1beta, IL-6, IL-12, IFN-gamma) and enhanced the expression of IL-10...

Alkaline earth metal oxide (MgO, CaO, SrO) catalysts supported on BEA zeolite were prepared by a wet impregnation method and tested in the transesterification reaction of rapeseed oil with methanol towards the formation of biodiesel (FAMEs-fatty acid methyl esters). To assess the influence of the SiO2 /Al2 O3 ratio on the catalytic activity in the tested reaction, a BEA zeolite carrier material with different Si/Al ratios was used. The prepared catalysts were tested in the transesterification reaction at temperatures of 180 °C and 220 °C using a molar ratio of methanol/oil reagents of 9:1...

With the increasingly strict limitations on emission standards of vehicles, deep desulfurization in fuel is indispensable for social development worldwide. In this study, a series of hybrid materials based on SiO2 -supported polyoxometalate ionic liquid were successfully prepared via a facile ball milling method and employed as catalysts in the aerobic oxidative desulfurization process. The composition and structure of prepared samples were studied by various techniques, including FT-IR, UV-vis DRS, wide-angle XRD, BET, XPS, and SEM images...

To investigate the relationship between structures and adsorption properties, four different morphologies of chitosan, with hydrogel (CSH), aerogel (CSA), powder (CSP), and electrospinning nanofiber (CSEN) characteristics, were employed as adsorbents for the removal of Acid Red 27. The structures and morphologies of the four chitosan adsorbents were characterized with SEM, XRD, ATR-FTIR, and BET methods. The adsorption behaviors and mechanisms of the four chitosan adsorbents were comparatively studied. All adsorption behaviors exhibited a good fit with the pseudo-second-order kinetic model (R2 > 0...

This work aims to enhance the adsorption performance of Laponite @diatomite for organic pollutants by modifying it with cetyltrimethylammonium bromide (CTAB). The microstructure and morphology of the CTAB-modified Laponite @diatomite material were characterized using SEM, XRD, FTIR, BET, and TG. Furthermore, the influences of key parameters, containing pH, adsorbent dosage, reaction time, and reaction temperature, on the adsorption process were investigated. The kinetics, thermodynamics, and isotherm models of the adsorption process were analyzed...

In this paper, the objective is to immobilize molecularly imprinted polymers (MIPs) onto the surface of magnetic carbon nanoparticles (Fe3 O4 @SiO2 @C) to develop an effective method for the adsorption of zearalenone (ZEN). The prepared products were characterized by FT-IR, SEM, TEM, XRD, VSM, TGA, and BET. The content of zearalenone in corn samples was monitored by HPLC. The results indicate that the particle size of magnetic molecularly imprinted polymers (MMIPs) is approximately 200 nm. The adsorption mechanism of MMIPs was confirmed by static adsorption and dynamic adsorption experiments...

The limited access to fresh water and the increased presence of emergent pollutants (EPs) in wastewater has increased the interest in developing strategies for wastewater remediation, including photocatalysis. Graphitic carbon nitride (g-C3 N4 ) is a 2D non-metal material with outstanding properties, such as a 2.7 eV bandgap and physicochemical stability, making it a promising photocatalyst. This work reports the process of obtaining high-surface-area (SA) g-C3 N4 using the thermal-exfoliation process and the posterior effect of Ag-nanoparticle loading over the exfoliated g-C3 N4 surface...

The development of direct dimethyl ether (DME) solid oxide fuel cells (SOFCs) has several drawbacks, due to the low catalytic activity and carbon deposition of conventional Ni-zirconia-based anodes. In the present study, the insertion of 2.0 wt.% Ru-Ce0.7 Zr0.3 O2-δ (ruthenium-zirconium-doped ceria, Ru-CZO) as an anode catalyst layer (ACL) is proposed to be a promising solution. For this purpose, the CZO powder was prepared by the sol-gel synthesis method, and subsequently, nanoparticles of Ru (1.0-2...

During the manufacturing process of white wine, various physicochemical reactions can occur and can affect the quality of the finished product. For this reason, it is necessary to apply different treatments to minimize distinct factors such as protein instability and pinking phenomenon, which can affect the organoleptic properties of wines and their structure. In this work, a new method for the preparation of a sorbent-type material is presented through the fractional purification of native bentonite in three fractions (Na-BtF1, Na-BtF2, and Na-BtF3)...

Three novel conjugated porous organic polymers, denoted as C-POP1-3 and which consist of alternating pyrene cores with various contorted fluorene surrogates, were successfully synthesized from a versatile one-pot palladium-catalyzed [3+2] cyclocondensation reaction. The resulting polymers were obtained in excellent yields and displayed weight-average molecular weights ( M w ) ranging from 12.2 to 20.2 kg/mol with polydispersity indices ( M w / M n ) ranging between 1.8 and 2.4, suggesting that the molecular masses are narrowly distributed and thus implying homogeneous polymer chains...