sbs

This study aimed to evaluate the bonding performance of self-adhesive flowable resin composites (SARs) to bovine teeth. Three SARs, one experimental, and two commercially available products, were used. The study parameters were shear bond strength (SBS), microleakage, and scanning electron microscopy (SEM) evaluation of bonding interfaces. The SBS of the materials was 14.1-15.1 MPa to enamel, 22.2-23.2 MPa to etched enamel, and 7.4-10.7 MPa to dentin. Specimens with pre-etching showed lower microleakage scores than those without pre-etching...

Wounds are considered one of the most critical medical conditions that must be managed appropriately due to the psychological and physical stress they cause for patients, as well as creating a substantial financial burden on patients and global healthcare systems. Nowadays, there is a growing interest in developing nanofiber mats loaded with varying plant extracts to meet the urgent need for advanced wound ressings. This study investigated the development and characterization of poly(lactic acid) (PLA)/ poly(ethylene glycol) (PEG) nanofiber membranes incorporated with Ora-pro-nóbis (OPN; 12...

Objective: This in vitro study evaluates the shear bond strength (SBS) of yttria-stabilized tetragonal zirconia (Y-TZP) and resin cement after different surface treatments. Materials and methods: Forty-eight ceramic cubes were divided into four groups ( n  = 12): G1 (control) sandblasting with Al2 O3 ; G2-sandblasting with silica-coated Al2 O3 (Rocatec); G3-Rocatec + CO2 laser; and G4-CO2 laser + Rocatec. A metallic primer was applied to the pretreated ceramic. A rubber ring was adapted on the central area, and then, the resin cement was inserted into the matrix and photoactivated...

BACKGROUND: Zirconia, with its excellent mechanical properties, has become a popular choice for esthetic and durable restorations due to the increasing demand of patients. It has overcome most of the limitations of all ceramic restorations. However, bonding to zirconia remains a challenge. OBJECTIVES: This study is aimed at assessing the effect of surface treatment with alkaline agents at two different temperatures on microshear bond strength ( μ SBS) of zirconia to composite resin...

Although fruitful achievements have been explored about job burnout, little is known about burnout in the field of social interaction among college students. To address this limitation, this study defined the concept of Social Burnout and developed a measurement tool for it. The study adopted the method of combining qualitative research with quantitative research. After the qualitative study, we gathered examples of social burnout and finished item writing. Using convenient sampling and theoretical sampling methods, six different samples were recruited for reliability and validity testing...

The development of a solid-state electrolyte (SSE) is crucial for overcoming the side reactions of metal potassium anodes and advancing the progress of K-ion batteries (KIBs). Exploring the diffusion mechanism of the K ion in SSE is important for deepening our understanding and promoting its development. In this study, we conducted static calculations and utilized deep potential molecular dynamics (DeepMD) to investigate the behavior of cubic K3 SbS4 . The original K3 SbS4 exhibited poor ionic conductivity, but we discovered that introducing heterovalent tungsten doping created vacancies, which significantly reduced the activation energy to 0...

Fully considering the mechanical and photoelastic anisotropies of monocrystalline silicon, the impacts of spatial symmetries on the stimulated Brillouin scatterings (SBSs) in nanoscale suspended silicon waveguides are studied theoretically and numerically based on group theory. First, starting from an assumption that the principal material coordinate system can be arbitrarily orientated in a waveguide with fixed geometry, the silicon waveguides are systematically classified into a number of point groups according to their spatial symmetry features...

Photonics-assisted techniques for microwave frequency measurement (MFM) show great potential for overcoming electronic bottlenecks, with wild applications in radar and communication. The MFM system based on the stimulated Brillouin scattering (SBS) effect can measure the frequency of multiple high-frequency and wide-band signals. However, the accuracy of the MFM system in multi-tone frequency measurement is constrained by the SBS bandwidth and the nonlinearity of the system. To resolve this problem, a method based on an artificial neural network (ANN) is suggested, which can establish a nonlinear mapping between the measured two-tone signal spectra and the theoretical frequencies...

The aim of this study is to investigate the repair bond strength of composite resin following three different surface treatments (bur-grinding, silanization, and Er,Cr:YSGG laser irradiation) using various universal adhesives. A total of 160 resin composite specimens, produced in cylindrical form (6 × 2 mm) with a nanohybrid composite resin within metal molds, were subjected to 5000 cycles of aging in a thermocycler. The aged samples were categorized into four groups based on surface treatments: control, bur, silane, and Er,Cr:YSGG laser...

OBJECTIVE: The present review was conducted to test whether the addition of titanium dioxide (TiO2 ) nanoparticles (NPs) within orthodontic bracket adhesives would alter their properties and assess their antimicrobial activity against cariogenic microorganisms in addition to noteworthy mechanical properties. MATERIALS AND METHODS: Using predetermined inclusion criteria, an electronic search was conducted using Dissertations and Thesis Global, the Web of Science, Cochrane, Scopus, and Medline/PubMed...

OBJECTIVE: This in vitro study aimed to evaluate the effectiveness of pretreatment with a self-etching primer for bonding aligner attachments to lithium disilicate (LD) and monolithic zirconia (MZ) ceramics. METHODS: Forty ceramics, including LD (n=20) and MZ (n=20), were divided into four study groups according to the surface pretreatments: LD specimens pretreated with universal primer (Monobond Plus, MP) after hydrofluoric acid etching (Group 1); MZ ceramics pretreated with MP after sandblasting (Group 2); LD ceramics pretreated with self-etching ceramic primer (Monobond etch & prime, MEP) (Group 3); and MZ ceramics pretreated with MEP after sandblasting (Group 4)...

OBJECTIVES: The aim of the present study was to evaluate the effect of chitosan and carboxymethyl chitosan (CMCS) on dentin surface morphology and bonding strength after irradiation of Er:YAG laser. METHODS: Eighty-four laser-irradiated dentin samples were randomly distributed into three groups (n = 28/group) according to different surface conditioning process: deionized water for 60s; 1wt% chitosan for 60s; or 1wt% CMCS for 60s. Two specimens from each group were subjected to TEM analysis to confirm the presence of extrafibrillar demineralization on dentin fibrils...

Background This study aimed to determine the antibacterial properties of orthodontic adhesive infused with stannous oxide nanoparticles (NPs) against Lactobacillus acidophilus and Streptococcus mutans bacteria, along with assessing the shear bond strength (SBS) of this composite when compared to conventional, non-infused composites. Methods A concentration of 1% w/w tin dioxide NPs (SnO2 NPs) was added to Transbond XT Orthodontic Adhesive. This modified composite material was used to prepare composite discs for the evaluation of its antibacterial properties against L...

Abusive head trauma (AHT) is a criminal offence that is prosecuted ex officio, following report to the police from physicians or child protection services. The aim of this study was to assess whether the judicial outcome (dismissal vs indictment) was influenced by the quality of the medical documentation and/or the time span between AHT diagnosis and reporting child abuse to the police. The cohort was divided in two groups: 13/23 dismissals (57%) and 10/23 indictments (43%). The diagnostic probability of the AHT cases was certain for both groups...

γ-Ray irradiation induces DNA double strand breaks (DSBs) and increases the risk of cancerization. Irradiated cells usually repair DSBs directly, but accumulate replication stress-associated DSBs, increasing the risk of structural variants (SVs). Although single nucleotide variants (SNVs) are also induced, it is still unclear which SNVs are induced by γ-ray irradiation. Here, we show that single base substitution (SBS) 17a, 17b, and 40 signatures were induced by γ-ray irradiation, which is mainly SNV induction in A-T bps...

This study analyzed the dentin shear bond strength (SBS) of an etch-and-rinse (ER) or a self-etch (SE) adhesive incorporated with multifunctional polyhedral oligomeric silsesquioxanes (MA-POSS-8). An ER adhesive (Solobond Plus, VOCO GmbH, Cuxhaven, Germany) and a universal adhesive applied in SE mode (Scotchbond Universal, 3M, St. Paul, MN, USA) were infiltrated with MA-POSS-8 (Hybrid Plastics Inc., Hattiesburg, MS, USA) at 5 wt.% or 10 wt.%. Pure adhesives served as controls. Bovine dentin specimens were conditioned with one of the adhesives prior to the application of a nano-hybrid composite (Venus Diamond A3, Kulzer, Hanau, Germany)...

This study addresses the challenge of platinum-group metal scarcity by exploring the adsorption of these metals from industrial wastewater. An inexpensive adsorbent with selective platinum-group metal adsorption capacity, named chitosan/citric acid@diatomaceous earth-sugarcane bagasse (CTS/CA@DE-SBS), was newly synthesized. The material features a double coating of chitosan and diatomite on bagasse biochar, and it exhibits an excellent adsorption performance for platinum-group metals due to the synergistic effects of the biochar and chitosan-diatomaceous earth intercross-linked coatings...

This study investigated microshear bond strength (µSBS) of two (2) dual-cured resin-luting agents (RelyX™ Ultimate and RelyX™ U200) when photoactivated through varying thicknesses of lithium disilicate, with or without thermal cycling. Discs of IPS e.max Press of 0.5, 1.5, and 2 mm in thickness were obtained. Elastomer molds (3.0 mm in thickness) with four cylinder-shaped orifices 1.0 mm in diameter, were placed onto the ceramic surfaces and filled with resin-luting agents. A Mylar strip, glass plate, and load of 250 grams were placed over the filled mold...

INTRODUCTION: This study aims to investigate the effect of different particle sizes and pressures on the shear bond strength (SBS) and the roughness (Ra) of polyetheretherketone. MATERIALS AND METHODS: A total of 117 polyetheretherketone specimens were fabricated and divided into a control (CN: no air-particle abrasion) and eight pre-treatment groups (air-abraded with 50- or 110-μm Al2O3 particles at 1(A), 1.5(B), 2(C), and 2.5(D) bar). The adhesive, Visio...

Hydrofluoric acid (HF) is commonly used as an etchant for the pretreatment of dental computer-aided design/computer-aided manufacturing (CAD-CAM) materials, such as glass-ceramics and resin composites. Despite its effectiveness, the harmful and hazardous nature of HF has raised significant safety concerns. In contrast, ammonium fluoride (AF) is known for its relatively low toxicity but has limited etching capability. This study explored the potential of ammonium hydrogen sulfate (AHS), a low-toxicity and weak acid, to enhance the etching ability of aqueous AF solutions for the bonding pretreatment of CAD-CAM materials...