Materialise mimics

BACKGROUND: Restoration of the glenoid joint line in shoulder arthroplasty is important for implant positioning and function. Medialization of the glenohumeral joint line due to glenoid bone loss is commonly encountered in primary and revision of shoulder arthroplasty albeit the direction and location of bone loss varies with different pathology. Three-Dimensional (3D) planning software has assisted in preoperative planning of complex glenoid deformities. However, limited literature is available defining a reliable 3D method to evaluate the glenoid joint line preoperatively...

Sex estimation is crucial in biological profiling of skeletal human remains. Methods used for sex estimation in adults are less effective for sub-adults due to varied cranium patterns during the growth period. Hence, this study aimed to develop a sex estimation model for Malaysian sub-adults using craniometric measurements obtained through multi-slice computed tomography (MSCT). A total of 521 cranial MSCT dataset of sub-adult Malaysians (279 males, 242 females; 0-20 years old) were collected. Mimics software version 21...

OBJECTIVE: Sagittal craniosynostosis constricts transverse skull growth, with possible neurocognitive sequelae. While the degree of sagittal suture fusion has been shown to influence the degree of dysmorphology, it is unknown if it impacts functional findings, including elevated intracranial pressure (ICP). The purpose of this study was to determine associations between the degree of sagittal suture fusion and optical coherence tomography (OCT) surrogates suggestive of increased ICP in patients with nonsyndromic sagittal craniosynostosis...

PURPOSE: This study aims to assess the efficacy of current measurement strategies for lung sizing and the feasibility of future use of computed tomography (CT)-derived lung volumes to predict a donor-recipient lung size match during bilateral lung transplants. METHODS: We reviewed the data of 62 patients who underwent bilateral lung transplantation for interstitial lung disease and/or idiopathic pulmonary fibrosis from 2018 to 2019. Data for recipients was retrieved from the department's transplant database and medical records, and the donor's data was retrieved from the DonorNet...

OBJECTIVE: To investigate condylar bone density (BD) in children with craniofacial microsomia (CFM) and identify factors that contribute to early stage condylar resorption (CR) after mandibular distraction osteogenesis (MDO). DESIGN: Retrospective study. SETTING: Craniofacial department of a plastic surgery hospital. PATIENTS: Fifty-one children with CFM classified as Pruzansky IIa based on complete pre-(T0) and post-MDO (T1) computed tomography (CT) data...

OBJECTIVE: The treatment of acetabular defects is one of the most difficult challenges of revision of total hip arthroplasty (RTHA), and tantalum is regarded as a promising bone substitute material. This study aims to investigate the effectiveness of 3D printed acetabular augment used in RTHA for the treatment of acetabular bone defect. METHODS: A retrospective analysis of the clinical data of seven patients who had undergone RTHA was carried out using 3D printed acetabular augment from January 2017 to December 2018...

INTRODUCTION: A number of studies on using both three-dimensional printing and virtual models in assessment of aortic coarctation have been published, yet none of them uses virtual modelling as a planning tool in a blind retrospective analysis. AIM: Assessment of virtual modelling and virtual reality in planning interventional treatment of aortic coarctation. MATERIAL AND METHODS: The study involved computed tomography scans of 20 patients performed prior to interventional treatment of aortic coarctation, which were used to create a virtual three-dimensional model of the aorta in Materialise Mimics...

OBJECTIVE: To characterise the morphology of temporal bone in patients with craniofacial microsomia (CFM). DESIGN: A retrospective study. SETTING: A craniofacial centre. PATIENTS: Ninety-four patients with unilateral craniofacial microsomia. INTERVENTIONS: Mimics 21.0 (Materialise Inc., Belgium) was used to locate temporal bone landmarks on preoperative computed tomography data. The spatial Cartesian coordinate system was established in 3-matic 13...

BACKGROUND/OBJECTIVES: The aim of this study was to explore the effect of palatally displaced canines on maxillary dimensions and arch shape. METHODS: Occlusal and skeletal landmarks were plotted on cone beam computed tomography (CBCT) images of 156 orthodontic patients: 78 with palatally displaced canines (PDC) (27 left, 28 right, and 23 bilateral) and 78 controls using Mimics™ (Materialise, Belgium). Arch forms were created, and arch width, depth, and skeletal dimensions were measured...

AIM: Alveolar ridge resorption following tooth extraction often renders a lateral bone augmentation inevitable. Some patients, however, suffer from severe early (during graft healing, Eres ) and/or late (during follow-up, Lres ) graft resorption. This study explored the hypothesis that the "individual phenotypic dimensions" may partially explains the degree of such resorptions. MATERIAL & METHODS: Patients who underwent a guided bone regeneration (GBR) were screened for inclusion according to the following criteria: (1) a relatively symmetrical maxillary arch, (2) an intact contra-lateral alveolar bone dimension, (3) the presence of a pre-operative cone-beam CT (CBCT), (4) a CBCT taken immediately after GBR, and (5) at least one CBCT scan ≥6 months after surgery...

Standing radiographs play an important role in the characterization of spinal sagittal alignment, as they depict the spine under physiologic loading conditions. However, there is no commonly available method to apply the lumbar lordosis of standing radiographs to supine CT-based virtual 3D models of the lumbar spine. We aimed to develop a method for the sagittal rigid-body registration of vertebrae to standing radiographs, using the exact geometry reconstructed from CT-data. In a cohort of 50 patients with monosegmental spinal degeneration, segmentation and registration of the lumbar vertebrae and sacrum were performed by two independent investigators...

This research study presents a methodology for creation of 3D models from confocal microscopy, specifically the retinal trilaminar capillary network, that can be used in 3D biomedical animation. Biomedical visualization professionals regularly use CT and MRI imaging data to create 3D models and other visuals. Adding confocal microscopy to this toolkit using ImageJ FIJI1 and Materialise Mimics® allows for a wider range of options to create data-driven 3D models of microscopic structures. Understanding the interactions of the neurovascular unit through visualization may be a key to advancing understanding of normal function of the retina and diabetic retinopathy pathology...

PURPOSE: In today's era, fractures of the femur are primarily managed with intramedullary devices. Keeping in mind the anatomical sagittal bow of the femur, intramedullary devices have been devised with an anterior bow, but this varies amongst various manufacturers - leading to complications such as anterior cortex impingement beyond the isthmus and posterior cortical opening at the fracture site. We intend to find the average radius of curvature (ROC) of the anatomical bow of the femur and the variation of the same...

To compare the morphometrical features of non-diseased mitral valves imaged in three-dimensional (3D) cardiac computed tomography with those analyzed macroscopically in autopsied healthy human hearts. A total of 51 cardiac computed tomography scans and 120 adult autopsied human hearts without cardiovascular disease were examined. The 3D reconstruction and visualization software (Mimics Innovation Suite 22, Materialise) was used for heart chambers semi-automatic segmentation and myocardial manual segmentation to visualize a 3D structure of the mitral valve complex and to perform all measurements...

The aim of the present study was to determine the craniometric characteristics of the crania of Hamdani sheep, one of local breeds of Turkey, by using computed tomography (CT). In the study, 13 (six female and seven male) skulls were used. After CT images of the skulls were taken, their three-dimensional models were created by MIMICS 20.1 (The Materialise Group, Leuven, Belgium) program. Thirty-eight craniometric measurements were taken over the models created and nine indices were calculated by using these measurements...

BACKGROUND: Corrective osteotomies of the upper extremities with patient-specific instruments (PSIs) are increasingly used. In this context, the concordance between planning and postoperative 3D radiographs as well as the association between 3D accuracy and clinical outcome has rarely been evaluated. In this pilot study, we aimed to investigate our clinical mid-term outcome and 3D accuracy as well as their possible correlation, including identifying aspects critical to reaching optimal correction results...

Objectives: To evaluate the retentive strength of overdenture attachments in 2-implant mandibular overdenture (2IMO) with implants placed at different positions and angulations. Materials and Methods: Edentulous mandibular models were 3D-printed using CBCT images and Materialise Mimics software and the denture models using the intraoral scanner. Two standard implants were placed parallel at different positions from midline (5, 10, 15, and 20 mm) with 0-0 degree angulations and with different distal angulations (0-5, 0-10, 0-15, 5-5, 10-10, and 15-15 degrees) at 10±mm from midline representing 10 study groups...

Aim and Objective: Our study was an observational and evolutional to analyze the significance of orbital volume calculation in predicting the probability or tendency of developing late enopthalmous on patients with unilateral orbital fracture with or without associated midface injury reported to our hospital. Materials and Methods: The subjects in our study included fifteen patients between18 and 60years. They were treated surgically and conservatively. Patients were exposed to series of examination from the day of injury or reporting for a consecutive period of up to six months following injury...

The present paper describes a procedure for the development and production of a physical model for surgical planning of a Left Ventricular Aneurysm. The method is based on the general approach provided in Otton et al. (2017) and was customized to seek a reliable and fast procedure for the production of a specific type of cardiac model - i.e. chambers of the left side of the heart. The paper covers all the steps: processing of the data, segmentation, modelling and 3D printing; details are provided for all the phases, in order to allow the reproduction of the achieved results...

As a vector of pine wood nematode disease, Monochamus alternatus is wood-boring, cryptic, and extremely difficult to control-features that have made them a disastrous problem. In this study, we present a method of scanning the galleries of Monochamus alternatus using CT (computed tomography) technology to obtain their systematic structure via 3D (three-dimensional) reconstruction, so as to clarify the gallery types and their structural parameters. TLC (thin-layer chromatography) scanning on wood segments damaged by M...