power plate

BACKGROUND: The development of a new imaging modality, such as 4D dynamic contrast-enhanced dedicated breast CT (4D DCE-bCT), requires optimization of the acquisition technique, particularly within the 2D contrast-enhanced imaging modality. Given the extensive parameter space, cascade-systems analysis is commonly used for such optimization. PURPOSE: To implement and validate a parallel-cascaded model for bCT, focusing on optimizing and characterizing system performance in the projection domain to enhance the quality of input data for image reconstruction...

The objective of this study is to optimize the ultrasonic-assisted extraction process of Ku Shen ( Sophorae Flavescentis Radix ) extracts (KSE) against Vibrio parahaemolyticus and explore their anti-biofilm activity and mechanism of action. The ultrasonic-assisted extraction process of KSE optimized by single factor experiment, Box-Behnken design and response surface methodology was as follows: 93% ethanol as solvent, liquid/material ratio of 30 mL/g, ultrasonic power of 500 W, extraction temperature of 80°C and time of 30 min...

PURPOSE: This study aimed to assess the reliability of lower limb muscle function (knee extensor/flexor peak torque, rate of torque development (RTD), impulse, and countermovement jump (CMJ) performance) and sprint performance (acceleration capacity). METHODS: CMJ performance was evaluated on a force plate. MVIC, RTD and impulse variables were investigated using a portable isometric dynamometer and sprint performance was assessed with dual-beam photocells in elite female athletes...

This research focuses on enhancing the efficiency of Bi2 Te3 -based thermoelectric generators (TEGs) in ocean thermal energy conversion (OTEC) systems through innovative heat exchanger designs. Our comparative study uses computer simulations to evaluate three types of heat exchangers: cavity, plate-fins, and longitudinal vortex generators (LVGs). We analyze their impact on thermoelectric conversion performance, considering the thermal energy transfer from warm surface seawater to TEGs. The results demonstrate that heat exchangers with plate-fins and LVGs significantly outperform the cavity heat exchanger regarding thermal energy transfer efficiency...

As one of the fundamental volleyball skills, countermovement vertical jump (CMJ) has been commonly implemented in the applied sports setting as a non-invasive and time-efficient assessment of athletes' lower-body neuromuscular function. The purpose of the present study was to examine the differences in CMJ characteristics between starters and non-starters within a cohort of professional female volleyball players. Nineteen athletes competing in one of the top European leagues (i.e., SuperLeague) volunteered to participate in the present investigation...

This study demonstrates a novel use of the U-Net convolutional neural network (CNN) for modeling pixel-based electrostatic potential distributions in GaN metal-insulator-semiconductor high-electron mobility transistors (MIS-HEMTs) with various gate and source field plate designs and drain voltages. The pixel-based images of the potential distribution are successfully modeled from the developed U-Net CNN with an error of less than 1% error relative to a TCAD simulated reference of a 500-V electrostatic potential distribution in the AlGaN/GaN interface...

Coulomb crystals have proven to be powerful and versatile tools for the study of ion-molecule reactions under cold and controlled conditions. Reactions in Coulomb crystals are typically monitored through a combination of in situ fluorescence imaging of the laser-cooled ions and destructive time-of-flight mass spectrometry measurements of the ejected ions. However, neither of these techniques is able to provide direct structural information on the positions of nonfluorescing "dark" ions within the crystal. In this work, structural information is obtained using a phosphor screen and a microchannel plate detector in conjunction with a Timepix3 camera...

The data presented in this experiment, three model convection-shaped pipe materials were designed as an effective cooling alternative for thermoelectric power generation by designing and experimentally modeling the thermoelectric power generator system, which controls the heat transfer of hot side thermoelectric at temperatures of 150 °C, 200 °C, and 250 °C by supplying power through (alternating current: A.C.) transformers to heater coil plate. The cold side fitted to finned heat exchanger is used in combination with an air-cooling system...

Volatile organic compounds (VOCs) indicative of pork microbial spoilage can be quantified rapidly at trace levels using selected-ion flow-tube mass spectrometry (SIFT-MS). Packaging atmosphere is one of the factors influencing VOC production patterns during storage. On this basis, machine learning would help to process complex volatolomic data and predict pork microbial quality efficiently. This study focused on (1) investigating model generalizability based on different nested cross-validation settings, and (2) comparing the predictive power and feature importance of nine algorithms, including Artificial Neural Network (ANN), k-Nearest Neighbors, Support Vector Regression, Decision Tree, Partial Least Squares Regression, and four ensemble learning models...

An LP11 -mode output all-fiber laser was presented, utilizing long-period fiber gratings (LPFGs) and polarization-maintaining optical fiber (PMF). The LPFG was designed and fabricated, achieving a 90.56% efficiency in LP01 to LP11 mode conversion. Furthermore, the transmission stability of LP11 -mode in the PMF was also explored, with the spatial mode overlap ratio exceeding 0.95. Ultimately, the high-power polarization-maintaining (PM) fiber laser, capable of the LP11 mode output, was constructed, with the output power of 600 W and the beam quality M2 of 2...

We demonstrate a high dynamic range (DR) Fourier-transform-based terahertz (THz) spectrometer by combining a THz photomultiplier tube (PMT) with a metasurface and a conventional Michelson interferometer. Because the THz-PMT response depends on the incident electric-field strength following the Fowler-Nordheim equation, we can directly obtain an electric field interferogram without any synchronized optical probe pulse in contrast to conventional THz-time-domain-spectroscopy (THz-TDS). The DR of the corresponding power spectrum using the proposed method was 4...

We developed a magnesium/sodium (Mg/Na) hybrid battery using a hierarchical disk-whisker FeSe2 architecture (HD-FeSe2 ) as the cathode material and a modified dual-ion electrolyte. The polarizable Se2- anion reduced the Mg2+ migration barrier, and the 3D configuration possessed a large surface area, which facilitated both Mg2+ /Na+ cation diffusion and electron transport. The dual-ion salts with NaTFSI in ether reduced the Mg plating/stripping overvoltage in a symmetric cell. The hybrid battery exhibited an energy density of 260...

Increasing near-field radiative heat transfer between two bodies separated by a vacuum gap is crucial for enhancing the power density in radiative energy transport and conversion devices. However, the largest radiative heat transfer coefficient between two realistic materials at room temperature is limited to around 2000 W/(m2 ·K) for a gap of 100 nm. Here, analogous to conventional plate-fin heat exchangers based on convection, we introduce the concept of a nanophotonic heat exchanger, which enhances near-field radiative heat transfer using two bodies with interpenetrating gratings...

The detection of nitroaromatic explosives in real samples is essential for environmental monitoring because of their strongly powerful nature and wide applications in industries. Aggregation-induced emission enhancement (AIEE) active fluorescent probe has been widely employed to detect nitroaromatic explosives. Hereby, a simple V-shaped bispyrene-based fluorescent probe (called py-o) with AIEE properties was designed and synthesized, which was fully charactered by 1D NMR, ESI, FTIR, and 2D NOESY spectra. The py-o displayed bright blue-green fluorescence excimer emission at 480 nm in DMF/H2 O (v/v 1:1)...

The 96 laser-induced multigraphene electrode (96L-MGE) integrated microwell plate (96 L-MGE-MP) is described. Each cell includes separate working, auxiliary, and reference electrodes, and the array sits on a poly-methyl methacrylate (PMMA) well. The 96 electrochemical cells were fabricated by laser ablation of polyimide adhesive tape, which created laser-induced graphene electrodes (L-GE). The microwell was produced using laser ablation of the PMMA sheet as well. The morphology and electrochemical characterization of L-GE were controlled by tuning the laser processing...

The exploration of electrocatalysts toward oxygen reduction reaction (ORR) is pivotal in the development of diverse batteries and fuel cells that rely on ORR. Here, a FeCo-N-C electrocatalyst (FeCo-HNC) featuring with atomically dispersed dual metal sites (Fe-Co) and hollow cubic structure is reported, which exhibits high activity for electrocatalysis of ORR in alkaline electrolyte, as evidenced by a half-wave potential of 0.907 V, outperforming that of the commercial Pt/C catalyst. The practicality of such FeCo-HNC catalyst is demonstrated by integrating it as the cathode catalyst into an alkaline aluminum-air battery (AAB) paring with an aluminum plate serving as the anode...

The surface cleaning of metals plays a pivotal role in ensuring their overall performance and functionality. Dielectric barrier discharge (DBD) plasma, due to its unique properties, has been considered to be a good alternative to traditional cleaning methods. The confinement of DBD plasma in microreactors brings additional benefits, including excellent stability at high pressures, enhanced density of reactive species, reduced safety risks, and less gas and energy consumption. In the present work, we demonstrated a DBD plasma-based method for the degradation of stains from metal surfaces in a microreactor...

The mechanical analysis of photovoltaics and building integrated photovoltaics is a key step for their optimal design and certification, and requires careful consideration, alongside solar power, durability and functionality issues. The solar cells are encapsulated in thin interlayers that are usually composed of a viscoelastic Ethylene-Vinyl Acetate compound, and protected by thin glass and/or plastic layers. This paper investigates the out-of-plane bending response of a full-scale commercial PV module and focuses attention on the shear bonding efficiency of the thin encapsulant for quasi-static and dynamic mechanical considerations...

Acoustic field and vibration visualisation is important in a wide range of applications. Laser vibrometry is often used for such visualisation, however, the equipment has a high cost and requires significant user expertise, and the method can be slow, as it requires scanning point by point. Here we suggest a different approach to visualisation of acoustic fields in the kHz - MHz range, using paint-on or removable film sensors, which produce a direct visual map of ultrasound displacement. The sensors are based on a film containing thermochromic liquid crystals (TLC), along with a backing/underlay layer which improves absorption of ultrasound...

OBJECTIVE: Craniofacial growth and development are more than a scientific curiosity; it is of tremendous interest to clinicians. Insights into the genetic etiology of cleft lip and palate development are essential for improving diagnosis and treatment planning. The purpose of this systematic review was to utilize a zebrafish model to highlight the role of the IRF6 gene in cleft lip and palate development in humans. DATA: This review adhered to the guidelines outlined in the PRISMA statement...