Edentulism

OBJECTIVES: To evaluate the loss of crestal bone height around dental implants placed in various tissue biotypes. MATERIALS AND METHODS: 20 patients with single edentulous sites were allocated randomly, with 10 samples in each into Group I (implants were placed in thick tissue biotype) and Group II (implants were placed in thin tissue biotype). Baseline cone-beam computed tomography (CBCT) was performed after implant placement in both groups, and follow-up CBCT was taken at the time of cementation prior to occlusal loading to assess the crestal bone loss around the mesial and distal side of implants in both groups...

STATEMENT OF PROBLEM: A predictable protocol for accurately scanning implants in a complete edentulous arch has not been established. PURPOSE: The purpose of this clinical study was to investigate the effect of splinting implant scan bodies intraorally on the accuracy and scan time for digital scans of edentulous arches. MATERIAL AND METHODS: This single center, nonrandomized, clinical trial included a total of 19 arches. Definitive casts with scan bodies were fabricated and scanned with a laboratory scanner as the reference (control) scan...

Poor oral health conditions in adults are associated to chronic pain. A nationwide cross-sectional study was conducted to investigate the link between tooth loss and chronic pain. The study involved 8,662 participants from the National Health and Nutrition Examination Survey (NHANES). Tooth count was categorized into four groups and chronic pain was defined as persistent pain lasting over three months despite treatment. Location of the chronic pain, demographics, comorbidities, lifestyle determinants, and dietary intake were retrieved...

OBJECTIVES: The objective of this study is (1) to compare the accuracy of an open-sleeved static computer-assisted implant system (sCAIS) with a closed-sleeve sCAIS and free-hand approach in immediate implant placement (IIP) of maxillary molar sites and (2) to investigate the influence of socket morphology on these approaches. MATERIALS AND METHODS: Ninety partially edentulous duplicated maxillary models simulating three different molar sockets (type A, B, and C based on Smith and Tarnow's classification) were investigated...

OBJECTIVES: To report the implant survival rates, clinical, and radiographic status after a period of more than 5 years in the function of 4 inter-foraminal implants retaining mandibular overdentures (OVDs) in individuals with T2DM. METHODS: 78 completely edentulous participants with type 2 diabetic mellitus (T2DM) who had worn mandibular OVDs retained by 4 inter-foraminal implants for long-term functional life were selected for this study. The participants were divided into 2 groups according to glycosylated haemoglobin A1c (HbA1c) levels before implant placement: group I with an HbA1c value > 6...

PURPOSE: To observe the long-term clinical effect of implants retained complete overdentures with Locator attachments. METHODS: A total of 48 patients with edentulous jaws treated with implants retained complete overdentures with Locator attachments were selected from the Outpatient Department of Peking University School and Hospital of Stomatology from 2016 to 2017. Among them, 21 patients underwent double-maxillary complete overdentures restoration and 27 patients underwent single-maxillary restoration...

BACKGROUND: Guided Bone Regeneration (GBR) is a versatile technique employed not only to correct pre-implant alveolar bone defects but also to facilitate bone defect correction during simultaneous implant placement. The effectiveness of GBR varies significantly among different protocols, as reported in the literature. This study specifically aimed to radiologically evaluate the horizontal bone gain obtained using a GBR procedure combining a particulate allograft, platelet-rich fibrin, resorbable collagen membrane, and screw tents...

Drug-influenced gingival enlargement is a common side effect associated with certain medications, particularly calcium channel blockers like nifedipine, which has been extensively documented. However, the occurrence of nifedipine-influenced masticatory mucosa overgrowth in edentulous patients is rare. Here, we present a case of nifedipine-influenced mucosal enlargement persisting in a 67-year-old edentulous patient 3 months after the extraction of all his teeth. The patient underwent flap surgery and alveoloplasty to excise the overgrown tissue, followed by complete denture restoration...

A 64-year-old edentulous woman with a mandibular fracture received a subperiosteal implant for fracture fixation and dental rehabilitation. However, the ball abutments were submerged by the soft tissue because they were too short. Therefore, we designed a connector to lengthen the attachment and achieve adequate stability and retention for the overdenture.

DESIGN: This study was an extension of a randomized crossover clinical trial approved by the institutional ethics committee (approval number: D2014-148) and adhered to the CONSORT guidelines. The original study juxtaposed patient contentment with single-implant overdentures (1-IODs) against conventional complete dentures (CCDs), with patient satisfaction being the primary focus. In this follow-up study, the cognitive function of edentulous patients receiving 1-IODs was assessed, specifically monitoring for the emergence of mild cognitive impairment (MCI) throughout a three-year period...

OBJECTIVE: This in-vitro study assessed the influence of two intraoral scanning (IOS) protocols on the accuracy (trueness and precision) of digital scans performed in edentulous arches. METHODS: Twenty-two abutment-level master casts of edentulous arches with at least four implants were scanned repeatedly five times, each with two different scanning protocols. Protocol A (IOS-A) consisted of scanning the edentulous arch before inserting the implant scan bodies, followed by their insertion and its subsequent digital acquisition...

Endosseous implants have revolutionized the field of Implants and Prosthodontics. Implant placement is a viable option in the treatment of partial and full edentulism. However, placement of implants in alveolar deficiencies may lead to adverse angulations, mechanical overload and esthetic dissatisfaction. When minimum dimensions for implant placement are not present in alveolar process, it is necessary to augment the size of the ridge. This can be achieved by various methods and materials. Here in this article presented a successful case of a 27 year old male patient with horizontal ridge augmentation in anterior left central incisor region using autogenous chin graft followed by the placement of implants after a period of six months of grafting and finally the prosthesis given after a period of six months of healing of implants...

PURPOSE: The study aimed to compare the performance of four pre-trained convolutional neural networks in recognizing seven distinct prosthodontic scenarios involving the maxilla, as a preliminary step in developing an artificial intelligence (AI)-powered prosthesis design system. MATERIALS AND METHODS: Seven distinct classes, including cleft palate, dentulous maxillectomy, edentulous maxillectomy, reconstructed maxillectomy, completely dentulous, partially edentulous, and completely edentulous, were considered for recognition...

AIM: To explore the association between oral conditions and their interaction with salt taste disability among American adults. METHODS: Data from the 2013-2014 NHANES cycle were used (n = 2373). The exposures were periodontitis, defined by the 2017 EFP-AAP classification, dental caries, missing teeth, and edentulism, as per the DMF-T index, and xerostomia. The outcome was salt taste disability, objectively assessed. Covariates included sex, age, educational level, poverty index, obesity, diabetes, smoking, alcohol consumption, and medications related to mouth dryness...

BACKGROUND: To clinically compare the effect of the conventional and the digital workflows on the passive fit of a screw retained bar splinting two inter-foraminal implants. METHODS: The current study was designed to be a parallel triple blinded randomised clinical trial. Thirty six completely edentulous patients were selected and simply randomized into two groups; conventional group (CG) and digital group (DG). The participants, investigator and outcome assessor were blinded...

OBJECTIVES: To compare the impact of three complete denture palatal rugae designs on participants' satisfaction and oral-health-related quality of life. BACKGROUND: Complete dentures palatal rugea are usually polished to a smooth finish, which can affect the patient's adaptation. Roughening or keeping an opening in the rugae area to replicate the natural sensation of the palatal rugae has been suggested but lacks clinical evidence. METHODS: This randomised crossover trial included participants with complete dentures randomly allocated to six sequences...

OBJECTIVE: To evaluate the touch perception threshold of the alveolar mucosa and quality of life of edentulous patients before (T0) and 30 days after (T1) the insertion of new complete dentures. BACKGROUND: Touch perception is important so that edentulous patients can detect the position of complete dentures in their mouth. MATERIALS AND METHODS: This study included 32 complete denture wearers with good oral and systemic health and no temporomandibular disorders for at least 5 years...

In the field of removable prosthodontics, computer-aided design and computer-aided manufacturing (CAD/CAM) have become widely recognized. The traditional method, which uses heat-polymerized resins for injection or compression molding, necessitates up to five patient visits and laborious laboratory processes. A digital workflow combined with a CAD/CAM methodology can provide prompt prosthesis delivery for patients with time constraints. This article's goal is to outline the steps and the limitations in the fabrication of digital dentures as well as the challenges, limitations, and solutions developed while developing a clinical workflow for the rehabilitation of completely edentulous patients with the CAD/CAM System...

New surgical techniques using narrow, tilted implants positioned through a magneto-dynamic tool in guided surgery for a Toronto restoration. A 69-year-old woman wanted fixed rehabilitation to replace her removable complete dentures. A cone-beam computed tomography showed significant bone resorption in both the maxillary and mandibular regions. The plan was to load the entire upper arch with six implants immediately, while removable partial dentures were recommended for the lower jaw. The guided surgery project was aligned with the new dentures, and the laboratory created a printed cast with dental implant analogues in planned positions...

Sjögren's syndrome is a chronic, inflammatory autoimmune disorder characterized by lymphocyte infiltration of the exocrine glands. Notably, the rehabilitation of partially edentulous patients with Sjögren's syndrome is limited by the scarce availability of studies that could inform therapeutic modalities and potential challenges during clinical procedures. This case report aimed to present the oral rehabilitation of a patient with Sjögren's syndrome who received fixed partial dentures (FPDs)...