Endocrown

BACKGROUND: To date, there is no clear consensus in the literature on which endocrown design and depth is the most effective treatment option for restoring endodontically treated maxillary central incisors. Aim: To determine the stress distribution of the anterior endocrowns by means of finite element analysis. MATERIAL AND METHODS: Nine 3D finite element models (groups A - I) were made, each one representing a restoration system of endodontically treated upper central incisors...

BACKGROUND: The objective of this study was to evaluate the knowledge, and awareness of dentists in Ha'il, Kingdom of Saudi Arabia, regarding the use of endocrown as post-endodontic restorations, utilizing an online questionnaire. METHODS: A cross-sectional study was carried out among dental practitioners working in Ha'il, Kingdom of Saudi Arabia. Dentists who practice in the Ha'il were included in the current study. The survey study involved a sample size of 245 participants...

AIM: To compare fracture resistance of multiple treatment modalities intended for mutilated teeth using polyether ether ketone (PEEK) and zirconia materials. MATERIALS AND METHODS: The study was divided into four groups according to treatment modality adopted ( n = 14): fiber post (F), Nayyar core (N), endocrown (E), and Richmond crown (R). Each group was further subdivided into two groups ( n = 7) according to the type of material used: zirconia (Z) and PEEK (P)...

INTRODUCTION: Different materials and restorative concepts have been proposed over the years to restore endodontically treated teeth (ETT). Monolithic ceramic and composite restoration can be lute to the tooh, without the use of a post. However, little is known how the material stiffness and presence of a composite core will affect the survival and failure mode. The objective of this in-vitro study was to evaluate the fracture strength and failure mode of endodontically treated molars, restored with ceramic or hybrid composite monolithic restoration, in the presence of absence of a composite core...

This systematic review aimed to identify and analyze in vitro studies on the marginal adaptation values of computer-aided-design/computer-aided-manufacturing (CAD/CAM) and heat-pressed lithium disilicate glass ceramics and zirconia-reinforced lithium silicates and endocrown restorations. A full literature search was conducted in Web of Science, PubMed/Medline, EMBASE, Scopus, Cochrane Library, Google Scholar, and ProQuest electronic databases. The following keywords: endocrown [(marginal adaption) or (marginal fit) or internal fitting)], endocrown [(molar(s)) or (premolar(s) or (posterior teeth) or (maxillary arch) or (mandibular arch)] and ceramic materials as [(lithium disilicate glass ceramic CAD/CAM) or (zirconia) or (heat-press)] were used...

PURPOSE: To assess the impact of fatigue loading on the internal and marginal fit of CAD/CAM-fabricated endocrowns for restoring endodontically treated molars using different machinable blocks. MATERIALS AND METHODS: A total of 72 mandibular first molars were prepared using a standardized method and were divided into four groups (n = 18), each restored with a different CAD/CAM material: group V = polymer-infiltrated ceramic (Vita Enamic); group K = partially stabilized tetragonal zirconia (Katana); group E = lithium disilicate ceramic (IPS e...

OBJECTIVE: To evaluate the influence of tooth position and retention depth of the dental pulp cavity on the accuracy of intraoral digital impression of endocrown preparation. METHODS: Dental pulp cavities with retention depths of 2, 3, 4 and 5 mm were prepared on 8 auatomic resin tooth models, including 4 right maxillary first molar (16) and 4 right mandibular first molar (46).Each cavity were scanned for 10 times using 3shape trios3, with micro-CT scans as the reference...

Endodontic treatment is often necessary in the field of dentistry. As the tooth structure is lost during such treatment, the tooth may become weaker and lose some of its mechanical qualities. Endodontically treated posterior teeth require cuspal coverage because of their anatomical features. Endocrowns are regarded as a suitable choice for restoring teeth that have undergone endodontic treatment. These restorations are recommended when there is a substantial loss of tooth structure, restricted interocclusal space, or a short clinical crown...

Background Awareness and knowledge about the endocrown technique contribute to the delivery of quality dental care and restorative long-term success. Dentists must be aware and knowledgeable about endocrowns as they offer a conservative approach, aid in maintaining tooth integrity, and have become a promising option in use recently. Aim This study evaluated the current state of knowledge, and the understanding of the endocrown technique as post-endodontic management among senior undergraduate dental students and interns who have studied the theoretical and laboratory procedures of endocrown as part of the curriculum...

OBJECTIVES: To evaluate and compare the effect of tooth preparation designs and different CADCAM. materials on stress distribution and Weibull survival probability of endocrowns. applied to root canal-treated lower first permanent molar using the 3D finite element. analysis method. METHODS: A root canal-treated lower first permanent molar was prepared for endocrowns with a. butt joint or with a ferrule design by placing, circumferentially, a 1-mm wide shoulder. finish line...

INTRODUCTION: The opportunity of using Endocrown-type restorations in the current prosthetic dentistry practice as an alternative to other, well-established methods of corono-radicular restorations and the evolving palette of adhesive materials has made these restorations more popular in the last few years. OBJECTIVE: The purpose is to review the available literature about Endocrown restorations regarding mechanical properties - fracture strength and resistance, survival rate, the preparation design - marginal and internal adaptation, and esthetics...

BACKGROUND This study evaluated 2 endocrown designs and traditional restoration with a conventional crown using post and core to find the best restoration design for endodontically treated mandibular first molars. MATERIAL AND METHODS Three 3D finite element models were constructed: (1) post and core restoration, (2) endocrown butt joint margin design, and (3) endocrown with shoulder finish line. The intact tooth geometry was extracted with computed tomography, then modified to the selected restoration designs...

PURPOSE: This study investigated the impact of preparation design and material types on fracture strength in maxillary premolars endocrowns after thermodynamic aging. MATERIALS AND METHODS: Eighty two-rooted maxillary premolar crowns underwent endodontic treatment (N = 80, n = 10). The teeth were categorized into ten groups (4-mm deep with no intracanal extension lithium disilicate glass ceramic & multilayer zirconia endocrowns (LE0 & ZE0); 4-mm deep with 4-mm intracanal extension in one canal (LE1 & ZE1); 4-mm deep with 2-mm intracanal extensions in both canals (LE2 & ZE2); flat overlays with no endocore (LO & ZO); glass fiber reinforced post & core and crown (LC & ZC))...

Restoration of posterior teeth with different extents of tissue loss has been a matter of debate in the literature. There are several recommendations and guidelines on when, how, and why to perform adhesive restorations (onlays, overlays, and endocrowns) or resistance form restorations (full-contour resistive crowns). In Part I of this three-part article series, the authors focused on adhesive partial restorations. In that article, the evidence was extensively described, and a clinically reasonable thought process was suggested for these decisions based on Coverage of susceptible cusps, Adhesion advantages and limitations, Resistance forms to be implemented, Esthetic concerns, and Subgingival management - the CARES concept...

The aim of the study was to evaluate the influence of resin cement material types on tooth with endocrown and onlay restorations. The first molar was scanned using Micro-CT and underwent a modelling process to obtain the 3D model for computational simulation. Eight models were simulated in the current study with two loading conditions (720N vertical load and 200N oblique load), two types of restoration (onlay and endocrown restorations), and two resin cement variants (dual-cure resin cement and light-cure resin cement)...

Endocrowns are designed to restore endodontically treated teeth with root canal treatment (Rct). Recently, endocrowns were proposed for teeth treated with full pulpotomy (FP). No data exist on in vitro evaluations for this combination. This study aimed to evaluate the mechanical behavior of pulpotomy-treated teeth with endocrowns according to different protocols for preparation design and materials and to assess whether 3D-printed resin simulators could be a reliable alternative for human teeth during in vitro strength tests...

STATEMENT OF PROBLEM: A consensus on whether a fully digital workflow can replace conventional methods of manufacturing partial-coverage restorations is lacking. PURPOSE: The purpose of this systematic review was to evaluate the accuracy, fit, and clinical outcomes of inlay, onlay, overlay, and endocrown restorations obtained with both digital and conventional workflows. MATERIAL AND METHODS: This study complied with the Preferred Reporting Items for Systematic Reviews and Meta-Analyses guidelines and was registered in the International Prospective Register of Systematic Reviews database (CRD42021258696)...

OBJECTIVE: The aim of this study was to summarize the results of the endocrown (EC) studies that compared tooth preparation designs, tooth types, and ceramic material types in relation to fracture force values. MATERIALS AND METHODS: A full literature search was conducted in Web of Science, PubMed/Medline, EMBASE, Scopus, Cochrane Library, Google Scholar, and ProQuest electronic databases. The following keywords: Endocrown [(molar(s)) or (premolar(s) or (posterior teeth)] and Ceramic materials as (Lithium disilicate glass-ceramic; Zirconia; Lava Ultimate) and (fracture strength) or (fatigue) were used...

To evaluate the fracture strength and the failure mode of endodontically treated molars restored with monolithic lithium disilicate and zirconia endocrowns and overlays. A total of 48 extracted mandibular molars were endodontically treated, decoronated 2 mm above the cementoenamel junction and divided into four 12-specimen groups. Group ELD: lithium disilicate endocrowns. Group EZ: monolithic zirconia endocrowns. Group OLD: lithium disilicate overlays. Group OZ: monolithic zirconia overlays. Overlays did not extend in the pulp chamber and endocrowns extended in the pulp chamber 2 mm...

PURPOSE: This in vitro study was conducted to compare the fracture resistance of tooth restoration complex restored with polyetheretherketone (PEEK) and lithium disilicate endocrowns. MATERIALS AND METHODS: A total of 46 extracted premolars were collected and treated endodontically. The teeth were mounted in cylindrical molds using autopolymerizing resin and were prepared for endocrown restoration. Specimens were divided into 2 groups (n = 23) to receive endocrowns made with 2 different materials (polyetheretherketone and lithium disilicate)...