electronic waste

Traditional agricultural irrigation systems suffer from wasting a lot of water allocated for irrigation through evaporation and drainage. To address water waste and increase crop productivity, irrigation scheduling is used, as irrigation scheduling depends on four elements: soil moisture, soil characteristics, weather conditions, and plant type. This paper proposes a new design for monitoring agricultural conditions and controlling the amount of soil moisture by determining the required irrigation water ratios and the ideal time period for irrigating crops...

BACKGROUND: The carbon footprint of Canada's health sector is among the worst in the world, responsible for 4·6% of Canada's total greenhouse gas emissions. A quarter of emissions from Canada's health sector are linked to pharmaceuticals, including metered dose inhalers (MDIs). MDIs use propellants, such as hydrofluorocarbons, which act as greenhouse gas emissions and contribute to the health-care sector's overall carbon footprint. The objective of this study was to describe MDI prescribing, dispensing, usage, and waste patterns at The Ottawa Hospital (Ottawa, ON, Canada)...

A novel 70 L composite tubular photo-bioreactor was constructed, and its photo-fermentation hydrogen production characteristics of batch and continuous modes were investigated with glucose as the substrate in an outdoor environment. In the batch fermentation stage, the hydrogen production rate peaked at 37.6 mL H2 /(L·h) accompanied by a high hydrogen yield of 7 mol H2 /mol glucose. The daytime light conversion efficiency is 4 %, with 37 % of light energy from the sun. An optimal hydraulic retention time of 5 d was identified during continuous photo-fermentation...

This study investigated the suitability of recycled asphalt pavement and polyethylene wastes as coarse aggregate in asphaltic concrete by evaluating the impact of the use of polyethylene polymer wastes and recycled asphalt pavement composite as aggregates on the physical and mechanical properties of the asphaltic concrete. The physical characteristics of the aggregate and bitumen were determined using relevant parametric tests. Recycled asphalt pavement was used to make asphaltic concrete samples using LDPE at 5%, 10%, 15%, RAP at 5% and HDPE at 5%, 10%, 15%, and a mixture of LDPE + HDPE at 5+5%, 7...

Polyester plastics, constituting over 10% of the total plastic production, are widely used in packaging, fiber, single-use beverage bottles, etc. However, their current depolymerization processes face challenges such as non-broad spectrum recyclability, lack of diversified high-value-added depolymerization products, and crucially high energy consumption. Herein, an efficient strategy is developed for dismantling the compact structure of polyester plastics to achieve diverse monomer recovery. Polyester plastics undergo swelling and decrystallization with a low depolymerization energy barrier via synergistic effects of polyfluorine/hydrogen bonding, which is further demonstrated via density functional theory calculations...

A green method based on magnetic micro-solid phase extraction (MNP-TW-μ-SPE) of tea waste impregnated with magnetic nanoparticles (MNP-TW) was developed for the extraction of ibuprofen (IBP) in water samples prior to UV-Vis spectrophotometric analysis. Experimenting parameters that affect the extraction efficiency of IBP, such as pH of the sample solution, sorbent dosage, extraction time, ionic strength, volume of the sample, type of desorption solvent, desorption time, and desorption volume, were studied and optimized in detail...

Banana pseudo-stem, often considered as an underutilized plant part was explored as a potential reinforced material to develop an eco-friendly biofilm for food packaging applications. In this study, Microcrystalline cellulose (MCC) was extracted from banana pseudo-stem by alkali and acid hydrolysis treatment. The extracted MCC was used as a reinforced material in different concentrated polyvinyl alcohol (PVA) matrix alone as well as both PVA and Carboxymethyl Cellulose (CMC) matrix to develop biofilm by solvent casting method...

The increasing depletion of reserves of natural resources has led to a growing worldwide focus on the exploitation of available waste in new domains. The presence of weedy plants is pervasive on a global scale and has detrimental effects on several aspects of the environment, agriculture, and people's health. Therefore, repurposing these Agri-weed plants for beneficial purposes would be a significant achievement. Furthermore, since raw materials constitute a substantial portion of manufacturing costs, using weeds as a feasible substitute for raw materials might potentially provide considerable advantages for manufacturers...

BACKGROUND: The reporting of surgical instrument errors historically relies on cumbersome, non-automated, human-dependent, data entry into a computer database that is not integrated into the electronic medical record. The limitations of these reporting systems make it difficult to accurately estimate the negative impact of surgical instrument errors on operating room efficiencies. We set out to determine the impact of surgical instrument errors on a two-hospital healthcare campus using independent observers trained in the identification of Surgical Instrument Errors...

In this work, we report a supercapacitor electrode material based on nano-flower like cobalt molybdate decorated on porous activated carbon derived from waste onion peels (β-CoMoO4 -POAC). The obtained porous activated carbon derived from onion peels (POAC), exhibits highly porous structure and after the hydrothermal treatment with salts of cobalt and molybdenum, we observed a uniform distribution of β-cobalt molybdate (β-CoMoO4 ) as nano-flowers on the surface of POAC. The chemical composition, morphology and porosity of the materials were thoroughly analyzed using field emission scanning electron microscopy, X-ray photoelectron spectroscopy, X-ray diffraction, infrared spectroscopy and Brunauer-Emmet-Teller surface area measurement...

The strong demand for biological materials in the food industry places chitosan at the forefront of other biopolymers. The present study aims to evaluate the antifungal properties of chitosan extracted from shrimp shell waste ( Parapenaeus longirostris ) against post-harvest strawberry ( Fragaria × ananassa ) spoilage fungi. The physicochemical characteristics (DD, Mw, and solubility) of extracted chitosan were determined. In addition, functional characteristics were studied by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and scanning electron microscopy (SEM)...

Tetrahedrite (Cu12 Sb4 S13 ) is an earth-abundant and nontoxic compound with prospective applications in green energy technologies such as thermoelectric waste heat recycling or photovoltaic power generation. A facile, one-pot solution-phase modified polyol method has been developed that produces high-purity nanoscale tetrahedrite products with exceptional stoichiometric and phase control. This modified polyol method is used here to produce phase-pure quaternary and quintenary tetrahedrite nanoparticles doped on the Cu-site with Zn, Fe, Ni, Mn, or Co...

Proposing recovery strategies to recover heavy-metal-inhibited sulfur-driven denitrification, as well as disclosing recovery mechanisms can provide technical support for the stable operation of bio-systems. This study proposed an effective bio-promoter (mediator-promoter composed of L-cysteine, biotin, cytokinin, and anthraquinone-2,6-disulfonate) to recover Cr(VI) inhibited sulfur-driven denitrification, which effectively reduced the recovery time of NO3 - -N reduction (18-21 cycles) and NO2 - -N reduction (27-42 cycles) compared with self-recovery...

Sustainable technologies for the recovery of rare earth elements (REE) from waste need to be developed to decrease the volume of ore mining extractions and its negative environmental consequences, while simultaneously restoring previously impacted lands. This is critical due to the extensive application of REE in everyday life from electronic devices to energy and medical technologies, and the dispersed distribution of REE resources in the world. REE recovery by plants has been previously studied but the feasibility of REE phytoextraction from a poorly soluble solid phase (i...

Microbial electrolysis cells (MEC) have the potential for enhancing the efficiency of anaerobic digestion (AD). In this study, microbiological and metabolic pathways in the biocathode of anaerobic digestion coupled with microbial electrolysis cells system (AD-MEC) were revealed to separate bioanode. The biocathode efficiently degraded 90 % propionate within 48 h, leading to a methane production rate of 3222 mL·m-2 ·d-1 . The protein and heme-rich cathodic biofilm enhanced redox capacity and facilitated interspecies electron transfer...

Advancements in biochar activating persulfate advanced oxidation processes (PS-AOP), have gained significant attention. However, the understanding of biochar-based catalysts in activating PS remains limited. Herein, biochar (BC) and N-doped biochar (NBC) were synthesized from hemp for activating PS to treat tetracycline (TC) wastewater and analyzed their mechanisms separately. Surprisingly, N-doped in biochar leads to a change in the activation mechanism of PS. The BC-PS system operates mainly through a radical pathway, advantageous for treating soil organic pollution (68%) with pH adaptability (less than 10% variation)...

Unscientific dumping of municipal solid waste (MSW) is a common practice in Kashmir. To have an environmentally friendly and sustainable waste management system, MSW was collected from nine study locations of this region. They were air-dried, then oven-dried at 105 °C for 24 h, segregated, and characterized for various components. The overall average organic waste was > 55%, plastic waste about 17%, inert material about 10%, paper 9%, and cloth waste 7%. The calorific value of paper and plastic wastes exhibited was 4910 kcal/kg, while organic waste had a calorific value of 1980 kcal/kg...

In the current work, a rapid, selective, and sensitive technique was developed for the detection of Alizarin Red S (ARS) by applying poly leucine modified carbon paste electrode (PLMCPE). Electrochemical impedance spectroscopy (EIS) and Scanning electron microscopy (SEM) were utilized to study the surface morphology of unmodified carbon paste electrode (UMCPE) and PLMCPE. The active surface area for UMCPE and PLMCPE was found to be 0.0012 cm2 and 0.0026 cm2 respectively. The electrochemical response of ARS at UMCPE and PLMCPE was analyzed using cyclic voltammetry (CV) in the potential window of 0...

This paper presents the extraction of zinc ions from waste resulting from the galvanic industry, such as sludge from acid zinc electroplating baths, and their revaluation in mineral fertilizer as zinc-ammonium phosphate. The purpose of this work is to extract zinc ions from the sludge that forms directly in the zinc bath, which can only contain zinc and small amounts of iron, to revalorize zinc into the form of zinc-ammonium phosphate. The process of obtaining zinc-ammonium phosphate is presented using waste sludge from the galvanic industry...

Plasmas are reactive ionised gases, which enable the creation of unique reaction fields. This allows plasmas to be widely used for a variety of chemical processes for materials, recycling among others. Because of the increase in urgency to find more sustainable methods of waste management, plasmas have been enthusiastically applied to recycling processes. This review presents recent developments of plasma technologies for recycling linked to economical models of circular economy and waste management hierarchies, exemplifying the thermal decomposition of organic components or substances, the recovery of inorganic materials like metals, the treatment of paper, wind turbine waste, and electronic waste...