SJM Valve

Objective: To perform an in vitro characterization of surgical aortic valves (SAVs) and transcatheter aortic valves (TAVs) to highlight the development of the flow dynamics depending on the type of valve implanted and assess the basic differences in the light of flow turbulence and its effect on blood damage likelihood and hemodynamic parameters that shed light on valve performance. Methods: A Starr-Edwards ball and cage valve of internal diameter 22 mm, a 23-mm Medtronic Hancock II SAV, a 23-mm St Jude Trifecta SAV, a 23-mm St Jude SJM (mechanical valve) SAV, a 26-mm Medtronic Evolut TAV, and a 26-mm Edwards SAPIEN 3 TAV were assessed in a pulse duplicator under physiological conditions...

OBJECTIVES: This study aimed to examine very-long-term outcomes of a mechanical valve at the mitral position. METHODS: This study included all patients who underwent mitral valve replacement (MVR) using a mechanical valve including urgent operation at the Department of Cardiovascular Surgery, Hyogo Brain and Heart Center, Himeji, from January 1987 to December 2015. RESULTS: Five hundred and eighty-three patients (277 men [47.51%]; age, 61 [54-67] years) were included in this study...

BACKGROUND: Comparative data on the clinical outcomes of TTK Chitra mechanical heart valve prosthesis (CHVP), an indigenously developed low-cost tilting disc valve and commonly used bileaflet valve, the St. Jude medical (SJM) prosthesis are sparse. METHODS: We conducted a retrospective follow-up study of consecutive patients undergoing mitral (MVR) and aortic valve replacement (AVR) with SJM or CHVP mechanical prostheses over a 6-year period at our institution...

Is the performance of locally manufactured mechanical valve prostheses relevant for modern cardiac surgery, in which mechanical valve replacement has become a rarity? This question comes to mind reading the article in this issue of the Journal demonstrating equal outcomes of the TTK Chitra tilting disk mechanical heart valve prostheses in comparison to the SJM bi-leaflet blockbuster. The evidence documenting efficacy of mechanical valve replacement stems from the early ages of cardiac surgery, but often demonstrates superior outcomes in terms of survival and hemodynamics...

Splenic abscess is a severe complication of infective endocarditis. The need for splenectomy to control prosthetic valve infection remains controversial. Here, we present the case of a 49-year-old man who complained of fever and general fatigue. Blood cultures grew Group G Streptococcus, and intravenous antibiotics were started. Abdominal computed tomography showed splenic abscess; thus, percutaneous drainage was performed. Two-dimensional transthoracic echocardiogram revealed a mobile vegetation on the right coronary cusp of the aortic valve with mild aortic regurgitation...

OBJECTIVES: The PROSE trial purpose is to investigate whether the incidence of thromboembolic-related complications is reduced with a current generation mechanical prosthesis (On-X Life Technologies/CryoLife Inc.-On-X) compared with a previous generation mechanical prosthesis (St Jude Medical-SJM). The primary purpose of the initial report is to document the preoperative demographics, and the preoperative and operative risk factors by individual prosthesis and by Western and Developing populations...

An 82-year-old female patient with severe mitral regurgitation was referred for evaluation of percutaneous mitral valve repair. Transoesophageal echocardiography revealed a left-atrial septal pouch (LASP) with an echogenic structure. Following the heart-team decision, interventional therapy was therefore discarded. During surgery, a thrombus in the LASP was found and carefully resected. Afterward, conventional valve replacement with a biological 31-mm SJM-EPIC prosthesis (Abbott Structural Heart Devices, Santa Clara, CA) was performed...

Three-dimensional transesophageal echocardiography (3D-TEE) provides detailed images of prosthetic valve thrombosis (PVT). However, data regarding PVT localization patterns based on 3D-TEE and their association with clinical findings among various bileaflet mitral prosthetic valve brands is lacking. The locations of thrombi were classified into 4 groups according to hinge and annulus involvement based on 3D-TEE: ring-like PVT involving entire mitral annulus (type-1), PVT involving peri-hinge(s) region and extends through some part of the annulus (type-2), PVT involving mitral annulus without involving hinge(s) region (type-3), and PVT involving only (peri)hinge(s) area (type-4)...

To assess the early hemodynamics after mitral valve replacement (MVR) using the St Jude Medical (SJM) Epic bioprosthesis. MVR was performed using the SJM Epic bioprosthesis in 35 patients from June 2018 to April 2020; three patients were excluded because the postoperative transthoracic echocardiography (TTE) data were unavailable. Data from postoperative TTE at 1 week and 3 months after the procedure were reviewed. The mean mitral pressure gradient (mMPG) was calculated using a continuous wave Doppler method...

Mechanical Heart Valves (MHVs) are known for their excellent lifespan and feasibly are the most reliable and stable valves amongst all prosthetic valves. Successful bileaflet MHVs such as the St. Jude Medical (SJM) are known for providing central blood flow and minimal pressure drop across the valve. However, due to their non-physiological flow conditions, they still suffer from hemodynamic complications, that is, red blood cell (RBC) lysis and/or thrombogenicity, to date. Our hypothesis is that the design of MHVs can be improved so that their hemodynamics can be comparable to those of tissue valves...

Background-Physiological helical flow in the ascending aorta has been well documented in the last two decades, accompanied by discussions on possible physiological benefits of such axial swirl. Recent 4D-MRI studies on healthy volunteers have found indications of early generation of helical flow, early in the systole and close to the valve plane. Objectives-Firstly, the aim of the study is to investigate the hypothesis of premature swirl existence in the ventricular outflow tract leading to helical flow in the valve plane, and second to investigate the possible impact of two different mechanical valve designs on the preservation of this early helical flow and its subsequent hemodynamic consequences...

BACKGROUND: The aim of this study was to evaluate the results after stented porcine xenograft implantation (Epic, SJM, St Paul, MN) with Linx anticalcification treatment in elderly patients at our high-volume tertiary care center. METHODS: A total of 3825 patients undergoing aortic (AVR = 2441), mitral (MVR = 892), or double valve (DVR = 492) replacement between 11/2001 and 12/2017 with Epic xenografts were evaluated. Outcomes were assessed by reviewing the prospectively acquired hospital database results, and regular annual follow-up information was acquired from questionnaires or telephone interviews...

OBJECTIVE: To compare the effects of the sounds of different types of mechanical mitral valves on the quality of life (QoL) of patients at different follow-up times. METHODS: We collected data from 150 patients who underwent mechanical mitral valve replacement. Three time points were assessed, including at discharge, the third postoperative month (POM3), and the twelfth postoperative month (POM12). The SF-36 and a self-questionnaire were used to assess the QoL. RESULTS: Regarding the SF-36 scores, the ATS valve was superior to the Sorin and SJM valves in terms of some items...

BACKGROUND: We want to compare the impact on health-related quality of life (HRQoL) between the Star GK and the SJM valve in the Chinese population. METHODS: We retrospectively enrolled a total of 172 patients who had undergone mechanical mitral valve replacement (MVR) (SJM valve in 87 patients and Star GK valve in 85 patients) at our institution from January 2013 to December 2015. We measured the sound pressure level, and used 2 self-administered questionnaires and the Chinese version of SF-36 to measure the HRQoL and valve-specific questions to evaluate patient anxiety...

BACKGROUND:  The purpose of this study was to compare the opening and closing sounds of three different mechanical mitral valves and to analyze their effects on the quality of life of patients. METHODS:  Ninety patients who underwent mechanical mitral valve replacement (MVR) were divided into three groups: those who received Advancing the Standard (ATS), St. Jude Medical (SJM), or Carbomedics (CM) mechanical valves. The sound pressure of the different valves was measured with a microphone...

OBJECTIVE: To investigate the effect of valve noise on the quality of life (QOL) in Chinese patients who underwent mechanical mitral valve replacement. METHODS: We enrolled a total of 103 patients who underwent mechanical mitral valve replacement (MVR, CM valve in 52 patients, SJM valve in 51 patients) from January 2016 to December 2016 in our institution and used the SF-36 as an instrument to assess patients' QOL. RESULTS: Patients' QOL improved over time...

BACKGROUND: Valve prosthesis selection in aortic valve replacement (AVR) is particularly difficult in middle‑aged patients (60-70 years old). AIMS: We described changes in trends and outcomes of AVR in middle‑aged patients over the last 10 years, based on the real‑life single‑center data from the Polish National Registry. METHODS: A total of 4912 consecutive adult patients who underwent any type of isolated aortic valve surgery between 2006 to 2016 were included...

OBJECTIVE: The objective of this study was to investigate and compare the hemodynamic and turbulence characteristics upon implantation of St Jude Medical (SJM) (St Jude Medical, St Paul, Minn) and On-X (On-X Life Technologies, Kennesaw, Ga) bileaflet mechanical valves. Both valves are considered highly successful bileaflet mechanical valves characterized by good clinical outcomes despite their numerous design differences. Although thromboembolism remains the main disadvantage of bileaflet mechanical valves, On-X valves have been shown to need less anticoagulation therapy...

Objectives: We aimed to compare the in vitro flow dynamics of the Perimount Magna Ease™ (PME) and the Trifecta™ (TF) bioprostheses. Material and methods: A new flow chamber was designed to compare the flow patterns of the PME (Edwards Lifesciences, Irvine, CA, USA) and the TF (SJM, St. Paul, MN, USA) aortic valve prostheses. This new channel offered the possibility of 2D-particle-image-velocimetry (2D-PIV) to completely evaluate the flow field downstream from the aortic valve to the middle of the aortic arch...

OBJECTIVE: Hinge washing is a crucial factor in the prevention of mechanical prosthetic valvar thrombosis, especially in the pulmonary valve position. The aim of this laboratory study was to determine the relationship between pressure difference and the amount of hinge washing in the closed position, using the pressures that are normal for the right ventricle and pulmonary artery. METHODS: In an in vitro setting, four different bileaflet mechanical valves were tested for hinge washing in closed position...