Simulation AND Orthop*

PURPOSE: The anterior stability of reverse total shoulder arthroplasty is affected by multiple factors. However, the effect of glenosphere inclination on stability has rarely been investigated, which is what this study aims to look into. METHODS: Reverse shoulder arthroplasty was performed on 15 cadaveric human shoulders. The anterior dislocation forces and range of motion in internal rotation in the glenohumeral joint (primary measured parameters) were tested in a shoulder simulator in different arm positions and implant configurations, as well as with a custom-made 10° inferiorly inclined glenosphere...

Skin Cutaneous Melanoma (SKCM) is a form of cancer that originates in the pigment-producing cells, known as melanocytes, of the skin. Delay wound healing is often correlated with the occurrence of and progression of SKCM. In this comprehensive study, we investigated the intricate roles of two important wound healing genes in SKCM, including Matrix Metalloproteinase-2 (MMP2) and Matrix Metalloproteinase-9 (MMP9). Through a multi-faceted approach, we collected clinical samples, conducted molecular experiments, including RT-qPCR, bisulphite sequencing, cell culture, cell Counting Kit-8, colony formation, and wound healing assays...

High-acuity trauma necessitates experienced and rapid intervention to prevent patient harm. However, upskilling junior trainees through hands-on management of real trauma cases is rarely feasible without compromising patient safety. This quality education report sought to investigate whether a simulation course operated via mixed reality (MR) headset devices (Microsoft HoloLens) could enhance the clinical knowledge recall and preparedness to practice of junior trainees with no prior experience managing trauma...

This study aims to identify preoperative risk factors for iliopsoas tendonitis after total hip arthroplasty, a complication typically attributed to acetabular cup position and orientation, using a validated iliopsoas impingement detection simulation. Analyzing CT scans and X-rays of 448 patients using a validated preoperative planning protocol, patients were simulated for iliopsoas impingement and categorized into at-risk and not at-risk groups based on a prior validation study, with a 23% at-risk incidence...

The symmetry of the flexion and extension gap influences the functional and long-term outcome after total knee arthroplasty (TKA). Most surgeons check it by applying varus and valgus stress using spacers. This technique has limited accuracy and could be easily extended by rotational movement of the spacer. The objective was to determine the detection threshold and interobserver reliability of this technique. In an in vitro setting with a human cadaveric knee, gap asymmetries were simulated by different medially and laterally applied forces...

Hydrothermal liquefaction (HTL) aqueous phases derived from mixed sludge and digested sludge of two wastewater treatment plants (WWTP) were characterized considering variations in primary-secondary sludge ratios, an aspect previously overlooked in the literature. Mixed sludge was obtained by mixing primary and secondary sludge to simulate high primary sludge, average, and high secondary sludge cases. Aerobic and mesophilic/thermophilic anaerobic biodegradability tests were conducted. Higher chemical oxygen demand, total ammonium-N, orthophosphate-P, fatty acids, and N-heterocycles in HTL aqueous samples were detected as the secondary sludge ratio increased in mixed sludge...

BACKGROUND: Virtual reality (VR) simulators have been introduced for skills training in various medical disciplines to create an approximately realistic environment without the risk of patient harm and have improved to more immersive VR (iVR) simulators at affordable costs. There is evidence that training on VR simulators improves technical skills but its use in orthopedic training programs and especially in curricular teaching sessions for medical students are currently not well established...

INTRODUCTION: American Board of Orthopaedic Surgery/American Council on GraduateMedical Education Residency Review Committee training requirements have necessitated the need for the adoption of simulation education into existing programmatic requirements. Current guidelines focus only on interns at a potentially significant cost to programs; both in total dollar amount and time. METHODS: The authors aim to provide a model that can maximize utility for all resident levels, manage cost by maximizing the use of cadaveric material, and allow integration of varied industry support...

Metallic bioresorbable orthopaedic implants based on magnesium, iron and zinc-based alloys that provide rigid internal fixation without foreign-body complications associated with permanent implants have great potential as next-generation orthopaedic devices. Magnesium (Mg) based alloys exhibit excellent biocompatibility. However, the mechanical performance of such implants for orthopaedic applications is contingent on limiting the rate of corrosion in vivo throughout the bone healing process. Additionally, the surgical procedure for the implantation of internal bone fixation devices may impart plastic deformation to the device, potentially altering the corrosion rate of the device...

BACKGROUND: Little is known about the effect of surgical approach on return to braking after total hip arthroplasty (THA), and few studies have investigated braking after THA with modern surgical techniques and rehabilitation protocols. METHODS: In a prospective comparative design, we enrolled 65 patients who received right-sided primary THA at our institution from April 2018 through March 2020, 34 with a direct anterior approach (DAA) and 31 with a posterior approach (PA)...

PURPOSE: Congenital femoral deficiency is characterized by limb length discrepancy and genu valgum. Lengthening of the femur along its anatomic axis increases valgus alignment by medial knee translation. Pairing limb lengthening with simultaneous medial distal femoral hemiepiphysiodesis can simultaneously correct two limb deformities. METHODS: All skeletally immature patients with congenital femoral deficiency who underwent antegrade femoral lengthening and concomitant guided growth over a 4-year period were reviewed...

OBJECTIVES: Slipped capital femoral epiphyses (SCFE) is a common pediatric hip disease with the risk of osteoarthritis and impingement deformities, and 3D models could be useful for patient-specific analysis. Therefore, magnetic resonance imaging (MRI) bone segmentation and feasibility of 3D printing and of 3D ROM simulation using MRI-based 3D models were investigated. METHODS: A retrospective study involving 22 symptomatic patients (22 hips) with SCFE was performed...

Accurate depth estimation poses a significant challenge in egocentric Augmented Reality (AR), particularly for precision-dependent tasks in the medical field, such as needle or tool insertions during percutaneous procedures. Augmented Mirrors (AMs) provide a unique solution to this problem by offering additional non-egocentric viewpoints that enhance spatial understanding of an AR scene. Despite the perceptual advantages of using AMs, their practical utility has yet to be thoroughly tested. In this work, we present results from a pilot study involving five participants tasked with simulating epidural injection procedures in an AR environment, both with and without the aid of an AM...

PURPOSE: Although the principles of hip reconstruction are consistent, due to lack of reliable anatomical landmarks, how to decide the acetabular cup reaming centre intraoperatively in Crowe IV patients with developmental dysplasia of the hip (DDH) remains unclear. This study aims to address this question. METHODS: Fifty-eight Crowe IV patients were enrolled from 2017 to 2019. By examining our previous clinical data, we analyzed the anatomical morphology of Crowe IV acetabulum and proposed a method of locating intraoperative reaming centering for implantation of a standard-sized acetabular cup, which is the upper two thirds of the posterior border of the true acetabulum...

INTRODUCTION: The importance of the assembly procedure on the taper connection strength is evident. However, existent surgical technique guides frequently lack comprehensive and precise instructions in this regard. The aim of our experimental study was to evaluate the influence of the surgical technique guide on the femoral head assembly procedure in surgeons with differing levels of experience in total hip arthroplasty. MATERIALS AND METHODS: Twenty-eight participants, divided into four groups based on their lifetime experience in total hip arthroplasty, conducted a femoral head assembly procedure in a simulated intraoperative environment before and after reviewing the surgical technique guide...

BACKGROUND: Glenoid position and inclination are important factors in protecting against scapular notching, which is the most common complication that directly affects the longevity of reverse shoulder arthroplasty (RSA). This study aimed to investigate the biomechanical characteristics of glenosphere orientation, comparing neutral tilt, inferior overhang with an eccentric glenosphere at the same placement of baseplate, and inferior tilt after 10° inferior reaming in the lower part of the glenoid in RSA...

BACKGROUND: Recently, non-technical skills (NTS) and teamwork in particular have been demonstrated to be essential in many jobs, in business as well as in medical specialties, including plastic, orthopedic, and general surgery. However, NTS and teamwork in neurosurgery have not yet been fully studied. We reviewed the relevant literature and designed a mock surgery to be used as a team-building activity specifically designed for scrub nurses and neurosurgeons. METHODS: We conducted a systematic review by searching PubMed (Medline) and CINAHL, including relevant articles in English published until 15 July 2023...

BACKGROUND: The use of 3D planning to guide corrective osteotomies of the lower extremity is increasing in clinical practice. The use of computer-tomography (CT) data acquired in supine position neglects the weight-bearing (WB) state and the gold standard in 3D planning involves the manual adaption of the surgical plan after considering the WB state in long-leg radiographs (LLR). However, this process is subjective and dependent on the surgeons experience. A more standardized and automated method could reduce variability and decrease costs...

Bone cement is one of the materials used in orthopaedics that serves various functions, such as binding bone implants, replacing damaged bones and filling spaces within bones. Various materials have been used to synthesize bone cement, and one promising material for further research is fish bone waste-based bone cement. This study investigates the potential of fish bone waste-based bone cement by incorporating nano fish bone (NFB) and L-arginine (L-Arg) protein into polymethyl methacrylate (PMMA) to examine apatite growth...

Monkeypox virus (MPXV), the pathogen responsible for the infectious disease monkeypox, causes lesions on the skin, lymphadenopathy, and fever. It has posed a global public health threat since May 2022. Highly sensitive and specific detection of MPXV is crucial for preventing the spread of the disease. Pyrococcus furiosus Argonaute ( Pf Ago) is an artificial DNA-guided restriction cleavage enzyme programmable with 5'-phosphorylated ssDNA sequences, which can be developed to specifically detect nucleic acids of pathogens...