One-liners

Frailty is a disorder of multiple inter-related physiological systems. It is unclear whether the level of physical performance factors can serve as markers of frailty and a sign. The purpose of this study was to examine the relationship between frailty and physical performance in elderly women. One hundred fourteen elderly women participated in this study, their aged was from 65 to 80. We were measured 6-min walk test, grip-strength, 30-sec arm curl test, 30-sec chair stand test, 8 foot Up- and Go, Back scratch, chair sit and reach, unipedal stance, BMI, and the frailty with questionnaire...

The acoustic propagation in lined flow duct with purely reactive impedance at the wall is considered. This reacting liner has the capability to reduce the speed of sound, and thus to enhance the interaction between the acoustic propagation and the low Mach number flow ( M≃0.3). At the lower frequencies, there are typically four acoustic or hydrodynamic propagating modes, with three of them propagating in the direction of the flow. Above a critical frequency, there are only two propagating modes that all propagate in the direction of the flow...

The performance of a widely distributed natural clay to attenuate contaminants released from an old landfill was investigated. The objective is to evaluate its potential use as a barrier for waste containment systems. Core samples of the natural clay were collected below the landfill and their parameters distribution with depth was determined. Partition coefficients, retardation factors and percentage values of pollutants concentrations, revealed a rapid decrease of contaminants with depth. The background values of the pollutants were below the maximum limits for drinking and irrigation water and with no need of reactors, collectors, aeration or recirculation systems...

BACKGROUND: Osteolysis resulting from wear debris production from the bearing surfaces is a major factor limiting long-term survival of hip implants. Oxidized zirconium head on crosslinked polyethylene (XLPE) is a modern bearing coupling. However, midterm in vivo wear data of this coupling are not known. QUESTIONS/PURPOSES: The purpose of this study was to investigate in vivo whether the combination of an oxidized zirconium femoral head on XLPE produces less wear than a ceramic head on XLPE or a ceramic head on conventional polyethylene (CPE) couplings and whether any of these bearing combinations results in higher hip scores...

BACKGROUND: Highly cross-linked polyethylene infused with vitamin E (E-poly) was developed to increase oxidative resistance without affecting mechanical properties. We evaluated this type of polyethylene in a randomized clinical study that used radiostereometric analysis. Our objective was to compare the early-term femoral head penetration of an E-poly liner with that of a heat-treated polyethylene liner, ArComXL. We hypothesized that the clinical outcome at two years following total hip arthroplasty would be unaffected by the choice of polyethylene...

BACKGROUND: Hypercholesterolemia is one of the most common risk factors for Coronary Artery Disease (CAD), which is the leading cause of death worldwide. As Numb is an important regulating factor regarding intestinal cholesterol absorption and plasma cholesterol level, the aim of the present study is to investigate the relationship between human Numb gene polymorphism and cholesterol level in Chinese subjects. METHODS: All participants came from the First Affiliated Hospital of Xinjiang Medical University (Male: 1052 and Female: 596), and four tagging SNPs (rs2108552, rs12435797, rs1019075 and rs17781919) of Numb gene were genotyped by using TaqMan assays and analyzed in an ABI 7900HT Fast Real-Time PCR System...

INTRODUCTION: The study included application of liners and dental composites in to cavities of six experimental animals-rabbits (Oryctolagus cuniculus). OBJECTIVE The aim of the study was to investigate rabbit dental pulp response to different liners. Methods Cavity preparation for class V were made on the maxillary central incisors and one lower incisor, while the second lower incisor served as a control tooth. These teeth were restored with the use of one of the following liners--Calcimol LC, ANA Liner and Fuji II LC Improved, and Ceram-X mono dental composite...

OBJECTIVE: The aim of this study was to compare the shear bond strength (SBS) of orthodontic brackets bonded to zirconia surfaces using three different zirconia primers and one silane primer, and subjected to thermocycling. METHODS: We designed 10 experimental groups following the surface treatment and thermocycling. The surface was treated with one of the following method: no-primer (NP), Porcelain Conditioner (PC), Z-PRIME Plus (ZP), Monobond Plus (MP) and Zirconia Liner Premium (ZL) (n=20)...

One of the purposes of cardiac rehabilitation (CR) after acute coronary syndrome (ACS) is to monitor and control weight of the patient. Our study is to compare the different obesity indexes, body mass index (BMI), and waist circumference (WC), through one well-designed CR program (CRP) with ACS in Guangzhou city of Guangdong Province, China, in order to identify different effects of BMI and WC on organ damage. In our work, sixty-one patients between October 2013 and January 2014 fulfilled our study. We collected the vital signs by medical records, the clinical variables of body-metabolic status by fasting blood test, and the organ damage variables by submaximal exercise treadmill test (ETT) and ultrasonic cardiogram (UCG) both on our inpatient and four-to-five weeks of outpatient part of CRP after ACS...

Compacted clay liners (CCLs) are commonly used as hydraulic barriers in several landfill applications to isolate contaminants from the surrounding environment and minimize the escape of leachate from the landfill. Prior to waste placement in landfills, CCLs are often exposed to temperature fluctuations which can affect the hydraulic performance of the liner. Experimental research was carried out to evaluate the effects of daily thermal cycles on the hydraulic performance of CCLs under simulated landfill conditions...

BACKGROUND: This in vitro study is intended to compare the shear bond strength of recent self-etching primers to superficial, intermediate, and deep dentin levels. MATERIALS AND METHODS: All teeth were sectioned at various levels and grouped randomly into two experimental groups and two control groups having three subgroups. The experimental groups consisted of two different dentin bonding system. The positive control group consisted of All Bond 2 and the negative control group was without the bonding agent...

UNLABELLED: Interface integrity can be maintained by setting the composite in a layering technique and using liners. OBJECTIVE: The aim of this in vitro study was to verify the effect of resin-modified glass-ionomer cement (RMGIC) lining and composite layering technique on the bond strength of the dentin/resin adhesive interface of lateral walls of occlusal restorations. MATERIAL AND METHODS: Occlusal cavities were prepared in 52 extracted sound human molars, randomly assigned into 4 groups: Group 2H (control) - no lining + two horizontal layers; Group 4O: no lining + four oblique layers; Group V-2H: RMGIC lining (Vitrebond) + two horizontal layers; and Group V-4O: RMGIC lining (Vitrebond) + four oblique layers...

This study was aimed at determining the surface degradation occurred on retrieved ceramic and metallic heads, as well as the influence of the head surface quality on the wear of the polyethylene counterface. To this purpose, 14 ceramic and 14 metallic femoral heads retrieved at revision surgery were examined. Scanning electron microscopic analysis provided visual evidence that some metallic heads presented crescent wear more often than the ceramic ones; the former showed a higher volumetric loss (as determined by Coordinate Measuring Machine) than the latter, but less negative Rsk values...

The aim of this study was to determine if accelerated aging of porcelain veneering had an effect on the surface properties specific to a tetragonal-to-monoclinic transformation (TMT) of zirconia restorations. Thirty-six zirconia samples were milled and sintered to simulate core fabrication followed by exposure to various combinations of surface treatments including as-received (control), hydrofluoric acid (HF), application of liner plus firings, application of porcelain by manual layering and pressing with firing, plus accelerated aging...

BACKGROUND: Although it is understood that backside damage occurs in polyethylene acetabular liners, the effect of highly crosslinked polyethylene, which has completely replaced conventional polyethylene, has yet to be examined. QUESTIONS/PURPOSES: The purpose of this study was to answer the following questions: (1) With conventional polyethylene (CPE), did the acetabular design make a difference in backside wear? (2) Is there a difference in backside damage between CPE and crosslinked polyethylene (XLPE) liners? (3) With XLPE, is the difference in backside wear between designs still present? (4) Is there any difference in backside damage in various zones on backside of individual liners? METHODS: This single-institution retrieval analysis involved visual damage scoring on the backside of 233 polyethylene liners implanted between 2002 and 2011...

The purpose of this study was evaluation the effect of immersion in distilled water and inorganic artificial saliva on the shear bond strength of a heat-polymerized and an auto-polymerized silicone-based denture lining materials. The denture liners investigated were Molloplast-B (heat-polymerized), and Mollosil plus (auto-polymerized). The soft liner specimens were 10 × 10 × 2.5 mm and were processed between two poly(methylmethacrylate) plates. Thirty shear specimens for each type of test lining material were prepared...

INTRODUCTION: Many healthy elderly Indian men seek surgical treatment for localized prostate cancer. Quite often, radical surgery is not offered to the patients over 70 years of age due to the perception of increased side-effects and complications. We have previously reported our results of robotic radical prostatectomy in a study comprising 150 Indian patients, where almost a quarter of patients were elderly. This subgroup analysis was therefore focused on evaluating perioperative and continence outcomes in elderly men (≥70 years) with localized prostate cancer...

OBJECTIVES: Cavity liners are frequently used prior placing a restoration, with one main aim being to reduce the number of remaining bacteria. We systematically appraised studies comparing antibacterial effects of different liners against each other or no liner. DATA STUDIES: reporting the number of sterile cavities before/after lining or sealing, or the reduction in bacterial numbers (colony-forming-units) in two or more treatment groups were included. Treatments were categorized as: no/placebo liner, calcium hydroxide, mineral trioxide aggregate, antibiotic/disinfectant, calcium phosphates, zinc oxide eugenol, black copper cement, and glass ionomer cement liners...

PURPOSE: This study evaluated the long-term shear bond strength between an indirect composite material and a zirconia framework coated with silica-based ceramics, taking the effect of different primers into account. MATERIALS AND METHODS: A total of 165 airborne-particle abraded zirconia disks were subjected to one of three pretreatments: no pretreatment (ZR-AB), airborne-particle abrasion of zirconia coated with feldspathic porcelain (ZR-PO-AB), and 9.5% hydrofluoric acid etching of zirconia coated with feldspathic porcelain (ZR-PO-HF)...

PURPOSE: The purpose of this study was to compare the coronal bone level and patient satisfaction in 1-implant and 2-implant assisted mandibular overdentures. MATERIALS AND METHODS: Twenty patients who had maladaptive mandibular dentures were treated in this study. Patients were randomly divided into two groups. The first group received 1 implant (Simple line II, Implantium, South Korea) in their mandibular midline and the second group received 2 implants in their B and D regions (according to Misch's category)...