Desorption

The surface modification of amorphous carbon nanospheres (ACNs) through templates has attracted great attention due to its great success in improving the electrochemical properties of lithium storage materials. Herein, a safe methodology with toluene as a soft template is employed to tailor the nanostructure, resulting in ACNs with tunable surface pores. Extensive characterizations through transmission electron microscopy (TEM), scanning electron microscopy (SEM), Raman spectroscopy, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and nitrogen adsorption/desorption isotherms elucidate the impact of surface pore modifications on the external structure, morphology, and surface area...

Constructing an environmentally friendly and efficient electrocatalyst holds important and profound significance for energy-efficient hydrogen production. Replacing the oxygen evolution reaction with a lower potential urea oxidation reaction (UOR) may save energy in water electrolysis to produce hydrogen. The UOR is characterized by its high energy barrier, which results in slow reaction kinetics. In this study, we introduced Ba(OH)2 into Ni(OH)2 to form uniform nanosheets. Due to the introduction of Ba2+ , the lattice expansion of Ni(OH)2 was triggered, leading to significant improvement in UOR activity...

Benzene, a high-volume chemical, is produced from larger molecules by inefficient and environmentally harmful processes. Recent changes in hydrocarbon feedstocks from oil to gas motivate research into small molecule upgrading. For example, the cyclotrimerization of acetylene reaction has been demonstrated on Pd, Pd alloy, and Cu surfaces and catalysts, but they are not 100% selective to benzene. We discovered that acetylene can be converted to benzene with 100% selectivity on the Ag(111) surface. Our temperature programmed desorption experiments reveal a threshold acetylene surface coverage of ∼one monolayer, above which benzene is formed...

INTRODUCTION: Previously reported preparation methods of Ginkgo biloba leaf extract (EGBL) have mainly focused on the enrichment of flavonoid glycosides (FG) and terpene trilactones (TT), which led to the underutilization of G. biloba leaves (GBL). OBJECTIVES: To make full use of GBL, in this study, a comprehensive optimization strategy for preparing EGBL by macroporous resin column chromatography was proposed and applied to enrich FG, TT, and shikimic acid (SA) from GBL...

Synthetic dyes are prevalent in aquatic environments, they have high toxicities, are non-degradable, and accumulate in the water. The removal of Crystal violet (CV) is carried out using batch experiments on the Salsola Tetragona (ST) plant as a novel adsorbent. The prepared adsorbent was analyzed by various methods (MEB, EDX, IRTF and PZC), to support its applicability as adsorbent. The adsorption study of CV is performed by optimizing the parameters affecting the adsorption process. The adsorption kinetics study is represented by pseudo-second-order (R2 = 0...

Dye pollution in water caused by excessive discharge of industrial effluent has become a major environmental problem in recent decades because of its irreversible effects on human health. In this study, low-cost carbon-based adsorbents synthesized from Oleaster seed (OS) were prepared in three forms of powder (PAC), film (FAC), and granule (GAC) and used for the removal of methylene blue dye. The properties of the synthesized adsorbents were characterized by SEM-EDX, BET, XPS and FTIR analyses. The maximum adsorption capacity (qmax ) of PAC, FAC, and GAC adsorbents were obtained as 68...

Strong and oriented electric fields are known to influence structure as well as reactivity. The strong electric field (EF) between the tip of a scanning tunneling microscope (STM) and graphite has been used to modulate two-dimensional (2D) polymerization of aryl boronic acids where switching the polarity of the substrate bias enabled reversible transition between self-assembled molecular networks of monomers and crystalline 2D polymer (2DP) domains. Here, we untangle the different factors influencing the EF-mediated (de)polymerization of a boroxine-based 2DP on graphite...

The improvement of the stability and adsorption properties of materials on targets in sample pre-treatment has long been an objective. Extensive efforts have been made to achieve this goal. In this work, metal-organic framework Ni-MOF precursors were first synthesized by solvothermal method using polyvinylpyrrolidone (PVP) as an ideal templating agent, stabiliser and nanoparticle dispersant. After carbonization and acid washing, the nanoporous carbon microspheres material (Ni@C-acid) was obtained. Compared with the material without acid treatment (Ni@C), the specific surface area, pore volume, adsorption performance of Ni@C-acid were increased...

Current guideline recommends the use of two identification methods for Neisseria gonorrhoeae. Matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF) is now used for primary identification and may be sufficient for definitive identification of N. gonorrhoeae. The performance of three secondary tests (BactiCard, RapID NH and NET test) were compared using 45 bacterial isolates, including 37 Neisseria species. These secondary tests demonstrated diminished specificity (67% - 88%) for N...

Electrolyte/electrode interfaces of room-temperature ionic liquids (RTILs) exhibit hysteretic responses to different applied potentials owing to the differences in the ion adsorption/desorption processes; the ion desorption requires excess potential, which reflects the activation energy of ion desorption. Thus far, the contributions of the ion adsorption energy and the activation barrier for ion desorption toward the ion-dependent excess potential have not been quantified. Herein, we report on our infrared-visible sum-frequency generation vibrational spectroscopy study of the hysteretic responses of the anion adsorption/desorption at Pt electrode interfaces using neat, binary, and diluted RTILs composed of 1-butyl-3-methylimidazolium cations ([C4 mim]+ ) and bis(trifluoromethanesulfonyl)amide ([TFSA]- ) and trifluoromethanesulfonate ([OTf]- ) anions...

The present work discusses the synthesis, characterization, and environmental applications of graphene oxide (GO), melamine formaldehyde resin (MF), and melamine formaldehyde/graphene oxide composite (MGO) for the efficient removal of Pb2+ from aqueous medium via batch and column procedures. TGA, XRD, TEM, zeta potential, nitrogen adsorption/desorption, ATR-FTIR, and other characterization techniques revealed that MGO is characterized by a greater surface area (609 m2 /g), total pore volume (1.0106 cm3 /g), pHPZC (6...

OBJECTIVE: In this study, the developed bioactive dental implant (BDI) from epoxy resin (ER), hydroxyapatite (HA), and curcumin nanoparticles (CUNPs). MATERIALS AND METHODS: The prepared BDI were characterized using their physicochemical, mechanical, antimicrobial, bioactive, and biocompatibility study. The scanning electron microscopy (SEM) morphology of the BDI was observed HA mineralized crystal layer after being immersed in the stimulated body fluids (SBF) solution...

To address the issue of high energy consumption associated with monoethanolamine (MEA) regeneration in the CO2 capture process, solid acid catalysts have been widely investigated due to their performance in accelerating carbamate decomposition. The recently discovered carbon nanotube (CNT) catalyst presents efficient catalytic activity for bicarbonate decomposition. In this paper, bifunctional catalysts SO4 2- /TiO2 -CNT (STC) were prepared, which could simultaneously catalyze carbamate and bicarbonate decomposition, and outstanding catalytic performance has been exhibited...

Practical applications of the hydrogen evolution reaction (HER) rely on the development of highly efficient, stable, and low-cost catalysts. Tuning the electronic structure, morphology, and architecture of catalysts is an important way to realize efficient and stable HER electrocatalysts. Herein, Co-doped Cu3 P-based sugar-gourd structures (Co─Cu3 P/CF) are prepared on copper foam as active electrocatalysts for hydrogen evolution. This hierarchical structure facilitates fast mass transport during electrocatalysis...

Within computational heterogeneous catalysis, two critical factors exist-coverage and multifaceted effects-which are challenging to incorporate and contribute to differences between the results obtained from computational and experimental studies. Such disparities exist when significant adsorbate-adsorbate interactions are present, particularly when coupled with computationally limited facet sampling. Here, we designed a study to demonstrate the significance of coverage and facet effects on the predicted coverages for O* and H* on Pt nanoparticles...

Adsorption-desorption experiments of three heavy metal ions (i.e., lead, copper, cadmium) in silty soil were carried out at different temperatures, and the microscopic characteristics of silty soil loaded with the three heavy metal ions were analyzed. A one-dimensional soil column was used to discuss the influences of heavy metal ion types and concentrations on the soil moisture distribution and the migration level of different heavy metal ions, especially during the dynamic change process from an unsaturated state to a saturated state...

A novel solid-phase microextraction fiber based on MXene-chitosan-polyurea (MXene/CS/EPPU) nanocomposite decorated on a graphenized pencil lead fiber (MXene/CS/EPPU/GPLF) was prepared and utilized for electro-enhanced solid-phase microextraction (EE-SPME) of diclofenac (DCF) in biological samples. After extraction and desorption of DCF, it was determined by differential pulse voltammetry (DPV). For this purpose, the working electrode was prepared by deposition of the mentioned MXene/CS/EPPU nanocomposite onto the graphenized pencil lead...

AIMS: To describe the incidence, aetiology, treatment, and outcomes of farmer-reported clinical mastitis on New Zealand dairy sheep farms. METHODS: A prospective cohort study was conducted on 20 spring-lambing New Zealand sheep milking farms over the 2022-2023 season. Clinical mastitis was defined as a change in the appearance of milk and/or signs of inflammation in the gland. Farmers were required to report all cases of clinical mastitis and collect information on affected ewes' demographics, clinical features, treatments (where applicable), and outcomes...

Pullulan was used as the wall material for microencapsulation of L. plantarum CRD7 by spray drying, while isomalto-oligosaccharides (IMO) was used as prebiotic. Also, the effect of different thermal protectants on survival rate during microencapsulation was evaluated. Taguchi orthogonal array design showed that pullulan at 14 % concentration, IMO at 30 % concentration and whey protein isolate at 20 % rate were the optimized wall material, prebiotic and thermal protectant, respectively for microencapsulation of L...

Addressing marine oil spills and industrial water pollution necessitates the development of eco-efficient oil-absorbing materials. With increasing concern for the environment, there is a consensus to decrease the use of petroleum-based polymers. Herein, lightweight poly(lactic acid) (PLA) blend foams with varying thermoplastic polyurethane (TPU) content were fabricated via a solvent-free, eco-friendly supercritical carbon dioxide (scCO2 ) extrusion foaming technology. The incorporation of TPU significantly enhanced the crystallization rate of PLA, with the semi-crystallization time of PT30 and PT50 blends at 105 °C exhibiting a reduction of 77...