dental implant neck design

PURPOSE: We investigated and compared the stress distribution within one- and two-piece mini-implants for overdentures with three different attachments (ball, Locator, and magnet) and two different diameters using three-dimensional finite element (3D FE) analysis and a monotonic bending test. The goal was to identify the most beneficial implant attachment system design for mini-implant overdentures with a lower risk of implant fracture. METHODS: Twelve 3D FE models simulating a mandible segment with one- and two-piece mini-implants with different attachment systems, diameters, and overdentures were created using three-dimensional computer-aided design (CAD) software...

PURPOSE: To evaluate the accuracy of a domestic digital implant guide plate to assist edentulous implant surgery, analyze the sources of deviation, and reduce the deviation of the guide plate. METHODS: In total, 14 edentulous patients were selected, and 100 implant sites were measured. The preoperative cone beam computerized tomography (CBCT) data were imported into the software to design and fabricate the guide plate. After implant surgery,the data were imported for 3D reconstruction and alignment model was exported into the Geomagic Studio software for deviation measurement...

BACKGROUND: The combination of a prosthetic index with Morse taper connection was developed, with the purpose of making prosthetic procedures more precise. However, the presence of the index may compromise the mechanical performance of the abutment. The aim of this study is to evaluate the effect of prosthetic index on stress distribution in implant-abutment-screw system and peri-implant bone by using the 3D finite element methodology. METHODS: Two commercial dental implant systems with different implant-abutment connections were used: the Morse taper connection with platform switching (MT-PS) implant system and the internal hex connection with platform matching (IH-PM) implant system...

Objective: The objective of the study is to compare two different implant designs having different neck configuration and neck interfaces. Materials and Methods: Fifty subjects were randomly divided into 2 groups, each containing 25 subjects. In Group I, conical connection (CC) (Nobel Biocare) with back-tapered collar dental implant and in Group II, external-hexagon (EH) (Nobel Biocare) with flat-to-flat implant-abutment interface dental implant was used. Radiographic marginal bone crest level and marginal bone loss (MBL) were compared...

BACKGROUND: Our aim was to report the long-term outcomes of mandibular reconstruction using CAD-CAM-designed 3D-printed porous titanium implants in patients not amenable to a free vascularized fibula flap reconstruction. METHODS: The implants were designed with ProPlan CMF® 2.2 software and manufactured with a Selective Laser Melting (SLM) "layer-by-layer" 3D-printing of pure porous titanium powder beds. Primary endpoints were implant exposure and implant removal calculated using Gray's tests...

OBJECTIVES: Analyzing factors that may have led to fracture of zirconia implants by macro/micro-fractography. METHODS: Six one-piece and ten two-piece full-ceramic zirconia implants from two manufacturers, Z-Systems and CeraRoot, were retrieved after clinical failure. The time-to-failure ranged from 3 to 49 months. Optical and scanning electron microscopy (SEM) were used to analyze the fracture planes at the macro- and microscopic level. Treatment planning, surgical protocol, fracture-origin location and characteristic fracture features were assessed...

BACKGROUND: Implant neck characteristics may affect initial implant stability, soft tissue healing, and early marginal bone loss (EMBL) at second-stage surgery. The null hypothesis was that, following two-stage implant insertion, rough surface, non-screw-type collar implants will present lower EMBL at 2nd-stage surgery than rough-surface, screw-type collar implants. METHODS: The study comprised seven male beagle dogs (mean weight 10.57 ± 2.8 kg; range 9-17 kg)...

AIM: To assess immediately loaded parallel conical connection (Nobel Biocare) implants with platform switch design in the maxillary esthetic zone for soft and hard tissue changes. MATERIALS AND METHODS: A total of 20 patients ( n = 20) underwent prosthetic replacement of the missing maxillary anterior tooth, with an immediately loaded parallel conical connection implant (Noble Biocare, Sweden) having a platform switch design. The size of the implant was 3.75 mm in width and 13 mm in length for all patients and placement followed a standardized surgical protocol...

PURPOSE: The collar region of an implant is its connection to the oral cavity. A balance between osseointegration on one hand and the absence of plaque accumulation on the other hand is necessary for successful implantation. It is yet to be determined which implant collar design, polished or rough, is best to stabilize the crestal bone level, avoiding peri-implantitis and subsequent risk of implant loss. The aim of this study was to investigate the influence of the architecture of the collar region on marginal bone and soft tissue response...

Microvascular free flap reconstruction has remained the standard of care in reconstruction of large tissue defects following ablative head and neck oncologic surgery, especially for bony structures. Computer aided design/computer assisted manufacturing (CAD/CAM) and 3-dimensionally (3D) printed models and devices offer novel solutions for reconstruction of bony defects. Conventional free hand techniques have been enhanced using 3D printed anatomic models for reference and pre-bending of titanium reconstructive plates, which has dramatically improved intraoperative and microvascular ischemia times...

The objective of this study was to evaluate the clinical and radiographic behavior of a novel triangular neck implant configuration in partially edentulous patients. Sixteen patients with a mean age of 58.3 years, were rehabilitated with 25 implants inserted in the healed sites of the maxilla and mandible; implant diameter was Ø3.3 and 3.9 mm. Clinical and radiographic measurements were first performed at prosthesis delivery that served as baseline; they were further evaluated after a mean period of 15.6 months...

Conical implant-abutment connections are popular for their stability; however, in other conditions, such as excessive force, implants and abutments can absorb all the stress. Some connections with three points of support can resist more than conical connections. In recent years, different studies has shown that the design of a connection affects its stability. The aim of this study was to analyze and compare the stresses in finite elements (FEs) in a newly proposed conical triangular connection in implants with hexagonal and conical connections...

BACKGROUND: The effect of different thread designs and diameters on the all-on-four concept is unclear. OBJECTIVE: The aim of the study was to clarify the differences in stress distribution of dental implants with various thread designs and diameters based on the all-on-four concept with three dimensional (3D) finite element analysis (FEA). METHODS: A 3D model of a totally edentulous mandible was used to perform the FEA. Four different models (M1, M2, M3, and M4) including 3...

OBJECTIVES: To test the failure load and failure mode of a novel implant-crown interface specifically designed for the fabrication of fully personalized, abutment-free monolithic zirconia CAD-CAM crowns compared to conventional implant-abutment interfaces involving prefabricated or centrally manufactured abutments for zirconia CAD-CAM crowns. METHODS: Implants (N=48) were divided into groups (n=12) according to different implant-abutment interface designs: (1) internal implant connection with personalized, abutment-free CAD-CAM crowns (Abut-Free-Zr), (2) internal conical connection with customized, centrally manufactured zirconia CAD-CAM abutments (Cen-Abut-Zr), (3) prefabricated titanium base abutments from manufacturer 1 (Ti-Base-1), (4) additional prefabricated titanium base abutments from manufacturer 2 (Ti-Base-2)...

AIM: The aim of the study was to assess the 5-year cumulative survival rate of implant-based dental rehabilitation following maxillofacial reconstruction with a vascularized bone flap and to investigate the potential risk factors which might influence the survival rate. MATERIALS AND METHODS: A retrospective cohort study was designed. Inclusion criteria involved 18 years old or above patients with the availability of clinical and radiological data and a minimum follow-up 1 year following implant placement...

(1) Background: Most of the clinical literature dealing with dental implants has been issued by experienced teams working either in university settings or in private practice. The purpose of this study was to identify contributing covariates to implant failure and marginal bone loss (MBL) at the 1-year follow-up of a novel triangular-neck implant design when placed by inexperienced post-graduate students. (2) Methods: A prospective cohort study was conducted on study participants eligible for implant placement at the UIC (International University of Catalonia), Barcelona, Spain...

To evaluate the implant and prosthetic of two implants with different surfaces and neck design. Enrolled patients received bone level, 12° conical connection implants (Nobel Parallel, Nobel Biocare; NOBEL group) with anodized surface (TiUnite) and roughness of 1.35 μm, or transmucosal implant system (Prama, Sweden and Martina; PRAMA group) with convergent collar, ZIrTi surface, and roughness 1.4-1.7 μm. Both implants were made of pure grade IV titanium, with similar diameter and length, chosen according to the dentistry department availability and patient's request...

BACKGROUND: Effect of prosthesis design on occlusal overload and long-term implant stability cannot be overstated. In Porcelain Fused to Metal (PFM) crowns, low cusp inclination and occlusal contacts limited to central fossa ensure axially directed forces on an implant but often pose esthetic and functional challenges. It is theorized that resilient Polyetheretherketone (PEEK) crowns have shock absorption capacity for favorable stress distribution. This study compared two implant crown materials and evaluated the effect of cusp inclination and occlusal contact distribution on resultant stresses...

BACKGROUND: Computerized surgical planning (CSP) in osseous reconstruction of head and neck cancer defects has become a mainstay of treatment. However, the consequences of CSP-designed titanium plating systems on planning adjuvant radiation remains unclear. METHODS: Two patients underwent head and neck cancer resection and maxillomandibular free fibula flap reconstruction with CSP-designed plates and immediate placement of osseointegrated dental implants. Surgical treatment was followed by adjuvant intensity modulated radiation therapy (IMRT)...

OBJECTIVES/HYPOTHESIS: Fibula flaps are routinely used for osseous reconstruction of head and neck defects. However, single-barrel fibula flaps may result in a height discrepancy between native mandible and grafted bone, limiting outcomes from both an aesthetic and dental standpoint. The double-barrel fibula flap aims to resolve this. We present our institution's outcomes comparing both flap designs. STUDY DESIGN: Retrospective cohort study. METHODS: We conducted a retrospective review of all patients undergoing free fibula flap mandibular reconstruction at our institution between October 2008 and October 2020...