resin cement

INTRODUCTION: Polyetheretherketone (PEEK) has a long history of usage in implant abutments, but it has not seen much applications in tooth-supported prosthetics. The purpose of this research was to examine the clinical performance of PEEK crowns as well as the level of patient satisfaction with them. The pilot study was designed as an in vivo longitudinal examination. MATERIAL AND METHODS: Twenty patients each received a PEEK crown during the procedure. In total, 22 implants were inserted, with 11 going into the maxilla and 9 into the mandible...

AIM: The aim and objective of this in vitro study was to evaluate the antibacterial efficacy of mineral trioxide aggregate, bioactive glass sealer, and epoxy-resin-based sealer. MATERIALS AND METHODS: In the present study, 22 Mueller Hinton agar (MH agar) plates were employed and equally divided into two groups. Three holes were made by removal of agar at equidistant points and filled with root canal sealers. The strains of the bacteria used in this study were S...

The article presents research results regarding the possibility of modifying pre-stressed concrete railway sleepers to improve their durability. The cracks that appear in these elements are one of the reasons for shortening the period of safe use. They do not have a significant impact on the load-bearing capacity of these elements, but on their durability. The resulting scratches become an easy way for the external environment to migrate inside the element, including the reinforcement area. Despite efforts to eliminate the possibility of cracking, this phenomenon still occurs in railway sleepers...

OBJECTIVES: In-office and lab milled prostheses are the staple for indirect restorations. It is therefore critical to determine their long-term bonding durability. METHODS: CAD/ CAM blocks of two classes of restorative materials: 1) a nano-ceramic reinforced polymer matrix (NCPM) and, 2) a polymer-infiltrated ceramic network (PICN) were bonded using four different universal adhesives (UA) and silane systems. A lithium disilicate glassceramic (LDS) was used as a reference...

Studies have reported challenges of debonding of dental zirconia crowns to from luting cement and prepared teeth. The aim of the study was to explore the application of dental glazing systems for enhancing the bonding of zirconia dental ceramics to luting resin cement. Commercial glaze powder and liquid (Vita Akzent) and experimental mica-based glaze powders were used for the study. X-ray diffraction analysis of the glaze powders (XRD) and Fourier Transform InfraRed Spectroscopy (FTIR) was done on the glaze liquid...

PURPOSE: To study the effect of different cleaning methods on the shear bond strength of self-adhesive resin cement to saliva-contaminated high translucency zirconia and surface wettability. METHODS: Eighty zirconia specimens were randomly divided into 5 groups (n=16), i.e., control group(not contaminated), 75% ethanol group,cleaning paste group,airborne-particle abrasion group, and atmospheric pressure cold plasma group. The contact angles was measured, shear bond strength were examined, and fracture types were determined...

STATEMENT OF PROBLEM: The type of veneer preparation is often chosen according to the patient's tooth structure and occlusion. Taking biomechanics into account in this decision-making process provides the clinician with more technical information on how to improve the clinical longevity of restorations. However, biomechanical analyses of veneer preparation designs are sparse. PURPOSE: The purpose of this 3-dimensional (3D) finite element analysis with microcomputed tomography (µCT) data obtained from realistic models was to assess the influence of different preparations for ceramic and composite resin veneers on restoration and resin layer stress distribution...

Objective: This in vitro study evaluates the shear bond strength (SBS) of yttria-stabilized tetragonal zirconia (Y-TZP) and resin cement after different surface treatments. Materials and methods: Forty-eight ceramic cubes were divided into four groups ( n  = 12): G1 (control) sandblasting with Al2 O3 ; G2-sandblasting with silica-coated Al2 O3 (Rocatec); G3-Rocatec + CO2 laser; and G4-CO2 laser + Rocatec. A metallic primer was applied to the pretreated ceramic. A rubber ring was adapted on the central area, and then, the resin cement was inserted into the matrix and photoactivated...

OBJECTIVE: Clinical contamination during direct adhesive restorative procedures can affect various adhesive interfaces differently and contribute to bulk failure of the restorations. This review aims to summarise the current knowledge on the influence of a variety of clinical contaminants on the bond strength at various adhesive interfaces during adhesive restorative procedures and identify gaps in the literature for future research. DATA AND SOURCES: An electronic database search was performed in PubMed and EMBASE to identify articles that investigated the influence of contaminants on direct restorative bonding procedures...

Objectives: Durable bonding to zirconia is a challenging issue in dentistry. This study aimed to assess the effect of bioglass coating of zirconia on the microshear bond strength of resin cement to zirconia and to study the effect of thermocycling on this bond. Materials and Methods: This in-vitro experimental study was conducted on 60 yttria-stabilized tetragonal zirconia blocks in six groups (N=10) based on surface pretreatment and thermocycling. Surface pretreatments included no treatment control, alumina particle abrasion, and bioglass-coating of zirconia...

STATEMENT OF PROBLEM: The clinical complications, success, and survival rates of indirect restorations delivered with the immediate dentin sealing protocol are unclear. PURPOSE: The purpose of this systematic review and meta-analysis was to find and collect evidence on the clinical complication, success, and survival rates of indirect restorations delivered with immediate dentin sealing. MATERIAL AND METHODS: Electronic databases were searched for clinical studies on immediate dentin sealing up to December 2023, without language or time limitations...

OBJECTIVES: To compare three different orthodontic adhesives (Transbond XT Light Cure Adhesive, Heliosit Orthodontic, Fuji Ortho LC) bonded to two types of orthodontic brackets: ceramic brackets (Fascination Roth 0.22) and metallic brackets (Topic Roth 0.22, Dentaurum). MATERIALS AND METHODS: The study was performed on 18 human teeth (6 for each adhesive). The prepared teeth were divided into three groups according to the examination time. Subsequently, they were observed after 1, 2 and 3 weeks following bonding...

AIM: Long-term clinical success on indirect restorations is largely determined by bonding efficiency of the luting agent, with adhesion to dentin being the main challenge. Therefore, aim of this study was to assess the microtensile bond strength when using flowable resin composite, preheated resin composite and dual self-adhesive resin cement as dentin luting agents. MATERIALS AND METHODS: Occlusal thirds of molar teeth were cut and randomly divided into 3 groups to be cemented: RelyX™U200, Filtek™ Z250 XT- preheated to 70° and Filtek Flow™ Z350XT...

Aim The aim of this study was to evaluate the shear bond strength between dual cure and light cure resin cements in root surface indirect restorations. Materials and methods Ten recently extracted human teeth were selected. Cylindrical blocks of resin were prepared and bonded near the Cemento-Enamel Junction (CEJ) of the prepared teeth to mimic the restoration at the root surface. The samples were randomly luted to the root surface using the light cure (Calibra Veneer, Dentsply Sirona, India) and dual cure (Fusion Ultra D/C, DenPro, USA) forming two groups...

The aim of this study is to analyze the effects of different endodontic irrigants and adhesive systems on the resin bond strength of fiber post cementation. In total, 144 single-rooted, unrestored human teeth were endodontically treated and randomly divided into 12 groups according to four endodontic irrigants (distilled water as control; EDTA 17%; NaOCl 5%; chlorhexidine digluconate 2%) and three different adhesive/resin cement systems (etch-and-rinse: orthophosphoric acid, Parabond® A+B/Paracore® ; self-etch: ParaBond® Non-Rinse Conditioner, Parabond® A+B/Paracore® ; Universal: ClearfilTM Universal Bond/ClearfilTM DC Core Plus)...

OBJECTIVES: Natural teeth and dental restorations present with various shades and levels of translucency. This study aimed to determine whether these variations in ceramic crowns and scan powder application affect the trueness of intraoral scanners. METHODS: Eight identical premade resin typodonts, each prepared for a crown on the maxillary right second molar, were used. Eight lithium disilicate crowns, distinguished by two levels of translucency (high and low) and four shades (BL1, A2, A3, and A4), were fabricated to an identical design and cemented onto each typodont, providing eight distinct experimental groups (2 levels of translucency × 4 shades)...

The aim was to evaluate the effect of stress distribution on vertical, horizontal, and oblique forces on the tooth model after reattaching the fragments of the maxillary incisor with vertical root fracture (VRF) using different materials, by 3D finite element analysis (FEA). Tooth with a root canal, spongious, and cortical bone models were designed. VRF was modeled on a tooth with 4 different re-attachment models: Group 1: dual-cure cement (DC)+fiber reinforced composite (FRC), Group 2: DC+polyethylene fiber, Group 3: DC+glass fiber, and Group 4:DC...

This study analyzed the physical-chemical properties of bioactive ionomer materials. Cention N bioactive materials were evaluated chemically activated (CN) and light-cured (CN-LC), Equia Forte Fill (EQUI); conventional resin composite Filtek Z350 XT (Z350); resin glass ionomer cement Riva light Cure (RIVA) and flowable resin composite Filtek Bulk Fill Flow (BULK-F) were evaluated. Sixty specimens (n=10) were prepared for sorption (SR), solubility (SL), flexural strength (FS), shrinkage stress (SS), conversion degree (CD), microhardness (MI), and surface roughness (SR) tests...

This study verified the effect of surface treatments of the zirconia-reinforced lithium disilicate ceramic bonded to resin cement. Ceramic blocks were divided according to treatments (n=10): FA+SRX (Fluoric acid + silane RX), FA+MDP (Fluoric acid + MDP), FA+SCF+MDP (Fluoric acid + silane CF + MDP), FA+MEP (Fluoric acid + MEP), and MEP (Self-etch primer). Resin cement cylinders were made in the ceramic blocks, photoactivated with 1,200 mW/cm² for 40s, stored in water at 37°C for 24h, and evaluated by the microshear strength test, optical failure descriptive analysis (%), surface characterization (SEM) and contact angle (Goniometer)...

This study verified the effect of the combination of preheated hydrofluoric acid/silane/electric current in the adhesion of the resin cement to ceramic. IPS E.max Press ceramic discs embedded in PVC rigid tubes were divided into four groups associating preheated hydrofluoric acid and silane applied with electrical current (n=10): Ha+S (Heated acid + silane); Ha+S+Ec (Heated acid + silane + electrical current); A+S (Acid + silane) and A+S+Ec (Acid + silano + electrical current). Resin cement/ceramic samples were stored in water at 37°C for 24h...