Read by QxMD icon Read

immediate dentin sealing

Noriko Ishii, Toshio Maseki, Yoichiro Nara
To examine the bonding state of metal-free CAD/CAM onlay restorations made from two popular resin composite blocks and a typical glass-ceramic block after cyclic loading, with and without immediate dentin sealing (IDS). Standardized mesial-distal-occlusalbuccal (MODB) cavities in 24 extracted human molars were prepared. The intra-cavity dentin surfaces of half of the cavities were immediately sealed with all-in-one adhesive and flowable composite, while those of the other half were not. All cavities were scanned, from which CAD/CAM onlays were fabricated from three types of block and cemented with an adhesive resin cement system...
March 29, 2017: Dental Materials Journal
Anna Saffarpour, Aida Saffarpour, Mohammad Javad Kharazifard, Atoussa Entezami Rad
OBJECTIVES: This study aimed to evaluate the effect of chlorhexidine (CHX) application protocol on durability of marginal seal of class V composite restorations. MATERIALS AND METHODS: Class V cavities (4×2×1.5mm) were prepared in the buccal surfaces of 160 human third molars. The teeth were randomly divided into five groups (n=32) of (G1) CHX+rinse+etching, (G2) CHX+etching, (G3) etching+CHX+rinse, (G4) etching+ CHX, and (G5) etching alone as the control group...
August 2016: Journal of Dentistry of Tehran University of Medical Sciences
Vinícius C Brigagão, Luis F D Barreto, Kellem A S Gonçalves, Marina Amaral, Rafael P Vitti, Ana C C Neves, Laís R Silva-Concílio
STATEMENT OF PROBLEM: Despite the advances in materials and techniques, adhesion to dentin is challenging because of the complex composition of dentin's mineral, organic, and fluid phases. PURPOSE: The purpose of this in vitro study was to evaluate the bond strength of 2 different resin cements (conventional and self-adhesive) with or without previous dentin sealing and the effect of interim cement. MATERIAL AND METHODS: Forty-five molars were embedded into acrylic resin blocks and a flat dentin surface was exposed...
November 12, 2016: Journal of Prosthetic Dentistry
S Gupta, A Paliwal, S Patel, M Bhati, Fyi Asiri, A H Shah
Aim: Comparative analysis of the coronal microleakage of a self-etching priming dentin adhesive with the use of antioxidant (Sodium Ascorbate (SA) and herbal quercetin) after Sodium hypochloride (NaOCl) and hydrogen-peroxide (H 2O2) irrigation. Materials and Methods: Seventy single root canals were enlarged and seven different treatment protocols were applied throughout the root canal treatment. The groups 1, 2 and 3 were irrigated with NaOCl. Group 1 was used as the negative control with only NaOCl irrigation whereas in group 2, Sodium ascorbate was applied as an additional irrigation agent following NaOCl...
October 15, 2015: West Indian Medical Journal
Jack Goldberg, Jan-Frederik Güth, Pascal Magne
PURPOSE: To evaluate the accelerated fatigue resistance of thick CAD/CAM composite resin overlays luted with three different bonding methods. MATERIALS AND METHODS: Forty-five sound human second mandibular molars were organized and distributed into three experimental groups. All teeth were restored with a 5-mm-thick CAD/CAM composite resin overlay. Group A: immediate dentin sealing (IDS) with Optibond FL and luted with light-polymerizing composite (Herculite XRV)...
2016: Journal of Adhesive Dentistry
Hatem M El-Damanhoury, Marianna Gaintantzopoulou
OBJECTIVES: To evaluate the effect of immediate dentin sealing and optical powder removal method on the fracture resistance of CAD/CAM-fabricated ceramic endocrowns. MATERIALS AND METHODS: Seventy-eight extracted premolars were endodontically treated. Standardized endocrown preparations were done in 60 teeth. Teeth were divided equally (n = 10) depending on the treatment of dentin (delayed sealing [DS] or immediate sealing [IS]), and the methods of optical powder removal (air-water spray washing [AW]; microabrasion [MA]; or aqueous suspension of pumice [PB], followed by air-water spray washing)...
2016: International Journal of Computerized Dentistry
Anchal Qanungo, Meena Ajay Aras, Vidya Chitre, Ashwin Mysore, Bhavya Amin, Sohil Rajkumar Daswani
PURPOSE: The aim of this article is to review available literature on the clinical procedure of immediate dentine sealing for indirect bonded restorations. STUDY SELECTION: More than 40 articles reporting the technique, studies, outcomes, etc. were reviewed after PUBMED/MEDLINE search, most of them addressing the specific situation of dentin bonding for indirect restorations. RESULTS: It is known that tooth preparation for indirect bonded restorations can result in significant dentin exposures...
October 2016: Journal of Prosthodontic Research
Rina Andréa Pelegrine, Luís Alexandre Maffei Sartini Paulillo, Augusto Shoji Kato, Carlos Eduardo Fontana, Sérgio Luiz Pinheiro, Alexandre Sigrist De Martin, Carlos Eduardo da Silveira Bueno
AIM: The aim of this study is to evaluate the impact of endodontic retreatment on push-out bond strength and dentin interface of two resin cements used for fiber postcementation during endodontic retreatment. MATERIALS AND METHODS: The root canals of 40 extracted human canines were prepared, obturated and divided into four groups (n = 10). Gutta-percha was partially removed and fiber posts were immediately cemented in groups 1 and 2 using Panavia F with ED Primer and RelyX™ U200, respectively...
January 2016: Journal of Contemporary Dental Practice
Marco M M Gresnigt, Mutlu Özcan, Mieke L A van den Houten, Laura Schipper, Marco S Cune
OBJECTIVE: Multiphase resin composite materials have been advocated as an alternative to reinforced ceramics but limited information is available to date on their stability. This in vitro study evaluated the effect of axial and lateral forces on the strength of endocrowns made of Li2Si2O5 and multiphase resin composite. METHODS: Sound human molars (N=60, n=10 per group) were randomly divided into 6 groups: Group C: Control, no preparation or restoration; Group LI: Endocrown made of Li2Si2O5 (IPS e...
May 2016: Dental Materials: Official Publication of the Academy of Dental Materials
Marco M M Gresnigt, Marco S Cune, Joanne G de Roos, Mutlu Özcan
OBJECTIVES: Adhesion on dentin is less reliable than on enamel, which could affect the durability of laminate veneers (LV). Immediate dentin sealing (IDS) is suggested instead of delayed dentin sealing (DDS) to overcome hypersensitivity and prevent debonding from dentin. This study evaluated the effect of IDS and DDS on the durability of Li2Si2O5 laminate veneers in vitro. METHODS: Window preparations were made on the labial surfaces of sound maxillary central incisors (N=50)...
April 2016: Dental Materials: Official Publication of the Academy of Dental Materials
Manar M Abu Nawareg, Ahmed Z Zidan, Jianfeng Zhou, Ayaka Chiba, Jungi Tagami, David H Pashley
PURPOSE: This review describes the evolution of the use of dental adhesives to form a tight seal of freshly prepared dentin to protect the pulp from bacterial products, during the time between crown preparation and final cementation of full crowns. The evolution of these "immediate dentin sealants" follows the evolution of dental adhesives, in general. That is, they began with multiple-step, etch-and-rinse adhesives, and then switched to the use of simplified adhesives. METHODS: Literature was reviewed for evidence that bacteria or bacterial products diffusing across dentin can irritate pulpal tissues before and after smear layer removal...
December 2015: American Journal of Dentistry
Carline R G van den Breemer, Marco M M Gresnigt, Marco S Cune
AIM: The aim of this comprehensive review is to systematically organize the current knowledge regarding the cementation of glass-ceramic materials and restorations, with an additional focus on the benefits of Immediate Dentin Sealing (IDS). MATERIALS AND METHODS: An extensive literature search concerning the cementation of single-unit glass-ceramic posterior restorations was conducted in the databases of MEDLINE (Pubmed), CENTRAL (Cochrane Central Register of Controlled Trials), and EMBASE...
2015: BioMed Research International
V B Santana, R S de Alexandre, J A Rodrigues, C Ely, A F Reis
OBJECTIVE: The object of this study was to evaluate the simulated pulpal pressure (SPP) and immediate dentin sealing technique (IDS) effects on the microtensile bond strength (μTBS) and nanoleakage of interfaces produced by different luting agents. METHODS AND MATERIALS: Two self-adhesive luting agents (RelyX Unicem [UC] and Clearfil SA Luting [SA]) and two conventional luting agents (Rely X ARC [RX] and Panavia F [PF]) were evaluated. Eighty human molars were divided in four groups according to luting agents...
March 2016: Operative Dentistry
Nicola Scotti, Emanuele Bergantin, Roberta Giovannini, Laura Delbosco, Lorenzo Breschi, Giuseppe Migliaretti, Damiano Pasqualini, Elio Berutti
PURPOSE: To evaluate the influence of a three-step etch-and-rinse versus a two-step self-etch adhesive system on immediate post-operative sensitivity. METHODS: In total, 204 subjects with one posterior tooth affected by a primary carious lesion were recruited. The subjects were randomly divided into two groups, based on the two multi-step adhesive systems used: Group A (All Bond 3) and Group B (Clearfil Protect Bond). The same skilled operator carried out the restorations using a nano-hybrid composite (Venus Diamond) in oblique stratification...
August 2015: American Journal of Dentistry
Giovanni Tommaso Rocca, Nicolas Rizcalla, Ivo Krejci, Didier Dietschi
The second part of this article series presents an evidence-based update of clinical protocols and procedures for cavity preparation and restoration selection for bonded inlays and onlays. More than ever, tissue conservation dictates preparation concepts, even though some minimal dimensions still have to be considered for all restorative materials. In cases of severe bruxism or tooth fragilization, CAD/CAM composite resins or pressed CAD/CAM lithium disilicate glass ceramics are often recommended, although this choice relies mainly on scarce in vitro research as there is still a lack of medium- to long-term clinical evidence...
2015: International Journal of Esthetic Dentistry
Andrej M Kielbassa, Fabian Philipp
OBJECTIVE: For decades, dental restorative treatment of large and deep cavities of posterior teeth has been adequately ensured by amalgam or by indirect gold restorations; with the continuing advancements in material technology and clinical techniques, alternative and more esthetic types of restorations have become feasible. Proximal box elevation (PBE) using composite resins has been advocated for relocating subgingival cavity outlines; treatment success and effects of PBE require documentation...
October 2015: Quintessence International
Richard Leesungbok, Sang-Min Lee, Su-Jung Park, Suk-Won Lee, Do Yun Lee, Byung-Jin Im, Su-Jin Ahn
PURPOSE: The purpose of this study was to find out the effect of immediate dentin sealing (IDS) on bond strength of ceramic restoration under various thermocycling periods with DBA (dentin bonding agent system). MATERIALS AND METHODS: Fifty freshly extracted human mandibular third molars were divided into 5 groups (1 control and 4 experimental groups) of 10 teeth. We removed enamel layer of sound teeth and embedded them which will proceed to be IDS, using All Bond II...
June 2015: Journal of Advanced Prosthodontics
Fereshteh Shafiei, Bahareh Yousefipour, Hajar Farhadpour
BACKGROUND: Despite widespread clinical uses of resin-modified glass-ionomers (RMGIs), their sealing ability is still a concern. This study evaluated the effect of delayed light activation (DLA) of RMGI on marginal sealing in differently pretreated cavities. MATERIALS AND METHODS: In this in vitro study, two standardized Class V cavities were prepared on the buccal and lingual surfaces of 56 sound maxillary premolars at the cementoenamel junction. The cavities were randomly divided into eight equal groups...
May 2015: Dental Research Journal
Pascal Magne
No abstract text is available yet for this article.
December 2014: Journal of Adhesive Dentistry
Paula Cristine Ghiggi, Arno Kieling Steiger, Maurem Leitão Marcondes, Eduardo Gonçalves Mota, Luiz Henrique Burnett, Ana Maria Spohr
OBJECTIVES: The objective of the following study is to evaluate the interaction between the resin materials used in immediate dentin sealing (IDS) techniques and impression materials with two different techniques to eliminate the oxygen-inhibition layer. MATERIALS AND METHODS: The occlusal dentin surface of 35 human molars was exposed. The teeth were used in two Groups: Group 1 - Impression with Express XT; Group 2 - Impression with Impregum. Groups 1 and 2 were divided into 14 subgroups: Groups 1a and 2a - Control groups; 1b and 2b - IDS with Clearfil SE Bond (CSE); 1c and 2c - IDS with CSE + additional polymerization with glycerin jelly; 1d and 2d - IDS with CSE + alcohol; 1e and 2e - IDS with CSE and Protect Liner F (PLF); 1f and 2f - IDS with CSE and PLF + additional polymerization with glycerin jelly; and 1g and 2g - IDS with CSE and PLF + alcohol...
July 2014: European Journal of Dentistry
Fetch more papers »
Fetching more papers... Fetching...
Read by QxMD. Sign in or create an account to discover new knowledge that matter to you.
Remove bar
Read by QxMD icon Read

Search Tips

Use Boolean operators: AND/OR

diabetic AND foot
diabetes OR diabetic

Exclude a word using the 'minus' sign

Virchow -triad

Use Parentheses

water AND (cup OR glass)

Add an asterisk (*) at end of a word to include word stems

Neuro* will search for Neurology, Neuroscientist, Neurological, and so on

Use quotes to search for an exact phrase

"primary prevention of cancer"
(heart or cardiac or cardio*) AND arrest -"American Heart Association"