femoral neck stress fracture

BACKGROUND: Dynamic hip screws (DHS) and proximal femoral nail anti-rotation (PFNA) were recommended for basicervical femoral neck fracture (BFNF), however, with high rate of postoperative femoral neck shortening. The proximal femoral bionic nail (PFBN) was designed to decrease the postoperative complications associated with DHS and PFNA. The aim of this study is to compare the biomechanical characters of DHS, PFNA, and PFBN for fixation of BFNF. METHODS: Using finite element analysis, we created a three-dimensional model of the BFNF for this investigation...

BACKGROUND AND OBJECTIVE: Antibiotic cement spacers (CS) are standard treatment for periprosthetic hip infection. However, complications such as cement spacer fracture and spacer dislocation remain common after surgery. The aim of this study is to investigate the influence of CS geometry design on mechanical strength through finite element analysis and compression load testing. METHODS: The CS model was generated using the three-dimensional engineering program, and an aluminum molding block was created...

The study was aimed to investigate microarchitecture of osteochondral junction in patients with osteonecrosis of the femoral head (ONFH). We hypothesis that there were microarchitecture alternations in osteochondral junction and regional differences between the necrotic region (NR) and adjacent non-necrotic region(ANR) in patients with ONFH. Femoral heads with ONFH or femoral neck fracture were included in ONFH group (n = 11) and control group (n = 11). Cylindrical specimens were drilled on the NR/ANR of femoral heads in ONFH group and matched positions in control group (CO...

OBJECTIVES: The purpose of this study is to evaluate the value of full thread screw and different fixation configurations in Pauwels type III femoral neck fracture. METHODS: A total of 40 artificial femoral model specimens were chosen, and Pauwels type III femoral neck fracture was simulated upon osteotomy at 80°. According to random number table, models were divided into four groups (10 cases in each group): Group A received the paralleled fixation with three partial thread screws (PTSs), group B received the crossed fixation with three PTSs, group C received the paralleled fixation with two full thread screws (FTSs) and one PTS, and group D received the crossed fixation with two FTSs and one PTS...

Pathologic fractures of the distal femur secondary to bone metastases are not as common as those in the proximal femur, and they are rarely reported on in the literature. Even in the absence of current metastatic lesions in the femoral neck, traditional orthopaedic teaching has stressed the importance of protecting the entire femur, while recent studies have shown that it may not be necessary to stabilize the entire femur in the event of future metastases. Thus, there is no consensus regarding optimal surgical treatment, making the choice of fixation often based on the experience of the surgeon...

Osteoporosis is a condition favored by the postmenopausal decline in estrogen levels and worsened by oxidative stress (OS). Polyphenols are natural compounds abundantly found in fruits and vegetables, and they exert antioxidant and hormonal effects that could be useful in osteoporosis prevention, as suggested by epidemiological studies showing a lower incidence of fractures in individuals consuming polyphenol-rich diets. The aim of our meta-analysis is to evaluate the effects of polyphenols on bone mineral density (BMD, primary endpoint) and bone turnover markers (BTMs, secondary endpoint) in postmenopausal women...

To analyze the fixation strength of cannulated screws fixation in the treatment of femoral neck fracture with posterior tilt due to insufficient reduction. Two sets of digital models of anatomical reduction and 15° tilting reduction were established by CT data. Each group of models was modeled with two different fixation methods. One fixation method was fixed according to the standard cannulated screws recommended by AO. Another fixation method is to tilt the screw posterior tilt 15°. The final four groups of models were obtained: AO principle nailing posterior tilt model (Group A), posterior direction nailing posterior tilt model (Group B), AO principle nailing anatomic reduction model (Group C) and posterior direction nailing anatomic reduction model (Group D)...

BACKGROUND: The influence of THA stem design on periprosthetic femoral fractures (PFFs) risk is subject of debate. This study aims to compare the effects of different cementless stem designs on stress-strain distributions in both physiological and osteoporotic femur under various loading conditions. MATERIALS: A biomechanical study using finite-element analysis was conducted. Four models were developed: three with implanted femurs and a native one chosen as control...

Current clinical methods of bone health assessment depend to a great extent on bone mineral density (BMD) measurements. However, these methods only act as a proxy for bone strength and are often only carried out after the fracture occurs. Besides BMD, composition and tissue-level mechanical properties are expected to affect the whole bone's strength and toughness. While the elastic properties of the bone extracellular matrix (ECM) have been extensively investigated over the past two decades, there is still limited knowledge of the yield properties and their relationship to composition and architecture...

INTRODUCTION: This study aims to identify radiographic and clinical risk factors of perioperative periprosthetic femur fracture associated with the direct anterior approach (DAA) using a metaphyseal fit and fill stem. We hypothesize stem malalignment with this femoral implant places increased stress on the medial calcar region, which leads to an increased risk of periprosthetic fracture. METHODS: We compared patients with periprosthetic femur fractures following DAA total hip arthroplasty (THA) utilizing the Echo Bi-Metric Microplasty Stem (Zimmer Biomet, Warsaw, IN) to a cohort of patients who did not sustain a periprosthetic fracture from five orthopedic surgeons over four years...

RATIONALE: Bilateral femoral neck stress fractures are relatively rare injuries that occur frequently in military recruits, athletes and patients with osteoporosis, renal bone disease, metabolic bone disease, and chronic steroid use. Herein, a case of an elderly patient with bilateral femoral neck stress fractures is reported. PATIENT CONCERNS: A 65-year-old man presented to the author's hospital with right hip pain for over a month. The patient was a farmer, had a long history of field labor before the onset of pain, denied any history of trauma...

BACKGROUND: Conventional cannulated screws are commonly used for internal fixation in the treatment of vertical femoral neck fractures. However, the noticeably high rates of undesirable outcomes such as nonunion, malunion, avascular necrosis, and fixation failure still troubled the patients and surgeons. It is urgent to develop new cannulated screws to improve the above clinical problems. The purpose of this study was to design a novel magnesium-titanium hybrid cannulated screw and to further evaluate its biomechanical performance for the treatment of vertical femoral neck fractures...

Long-distance "thru-hiking" has extraordinary physical demands and has become increasingly popular. This report describes a man (55 y) who thru-hiked the Pacific Crest Trail in 2021 and was at risk of developing the relative energy deficiency in sport (RED-S) syndrome. Hiking distance was 3767 km over 128 d. Eighty-eight days (69%) were full days of hiking, covering 38±8 km/d (mean±SD) in 7.9±1.6 h/d. Exercise energy expenditure above rest (heart rate vs indirect calorimetry regression method) was 2834±1518 kcal/d, total energy expenditure was 5702±1323 kcal/d, and energy intake was 4141 kcal/d...

BACKGROUND: The femoral neck dynamic intersection system (FNS) is mechanically more stable than other internal fixation techniques. Current studies have confirmed that the structural design of FNS has good biomechanical properties in European and American populations. However, whether the suitability of the FNS's 130° main nail angle design for Asian populations has been thoroughly investigated remains unclear. AIM: To compare the biomechanical stability differences among different main nail angles of the FNS in the treatment of femoral neck fractures in Asian populations...

Romosozumab treatment reduces the rate of hip fractures and increases hip bone density, increasing bone formation by inhibiting sclerostin protein. We studied the normal pattern of bone formation and osteocyte expression in the human proximal femur because it is relevant to both antisclerostin treatment effects and fracture. Having visualized and quantified buds of new bone formation in trabeculae, we hypothesized that they would coincide with areas of (a) higher mechanical stress and (b) low sclerostin expression by osteocytes...

BACKGROUND: Femoral neck stress fractures are rare fractures traditionally found in athletes and military personnel. There is limited literature on return to activity. OBJECTIVES: To report return to activity rates and times, and long-term outcomes for femoral neck stress fractures reported in the literature. To examine the effects of bone metabolic dysfunction and surgical management on return to activity following FNSF. RESEARCH DESIGN & METHODS: A systematic literature review of case reports and case series on adults with femoral neck stress fracture that were diagnosed by gross fracture line on X-ray or gold-standard diagnosis with MRI was conducted...

To explore how the thickness of the femoral lateral wall influences the effectiveness of internal fixation systems used to treat intertrochanteric fractures. CT images of the pelvis and femur of a male adult were used to construct an intertrochanteric fracture model (AO/OTA 31-A2) with various thicknesses of the femoral lateral wall (FLW). Four finite element (FE) models were created with the lateral femoral walls being 10 mm, 20 mm, 30 mm, and 40 mm thick. The fracture models were fixed with a dynamic hip screw (DHS), a proximal femoral nail anti-rotation (PFNA), and a proximal femoral locking compression plate (P-FLCP)...

BACKGROUND: High shear force is a major factor detrimental to the healing of vertical femoral neck fractures. In addition to firm fixation, reduction quality is crucial for postoperative stability. The present study aimed to compare the biomechanical stability of the newly invented femoral neck system and three inverted-triangle cannulated compression screws treatments for non-anatomical reduction of Pauwels type-III femoral neck fractures. METHODS: A total of 18 non-anatomical reduction Pauwels type-III femoral neck fracture finite element models were fabricated and fixed using three inverted-triangle cannulated compression screws or the femoral neck system...

UNLABELLED: Both peripartum cardiomyopathy (PPCM) and takotsubo syndrome (TTS) are diagnoses of exclusion and are thus considered a heterogeneous disease group. TTS is generally triggered by psychogenic or physical stress. Recently, the anti-angiogenic factor cleaved prolactin has been noted as a cause of PPCM, but the precise mechanisms of these diseases remain unexplained. An 87-year-old female with a past surgical history, including transsphenoidal endoscopic surgery to remove a pituitary prolactinoma, recently underwent surgery to repair a left-sided femoral neck fracture and developed dyspnea followed by back pain; shortly after, she became embarrassed by fecal incontinence...

PURPOSE: Conventional cannulated screws (CS) are the main treatment method for femoral neck fractures (FNF). However, the rate of femoral head necrosis remains high after FNF treatment. The study aimed to compare the biomechanical features of different internal fixation materials for the treatment of Pauwel type III FNF to explore new strategies for clinical management. METHODS: A new material was prepared by applying casting, freeze drying and sintering process...