GPA

A new Mg-Zn-Zr-Ca alloy in a powder state, intended to be used for custom shaped implants, was obtained via a mechanical alloying method from pure elemental powder. Further, the obtained powder alloy was processed by a PBF-LB/M (powder bed fusion with laser beam/of metal) procedure to obtain additive manufactured samples for small biodegradable implants. A series of microstructural, mechanical and corrosion analyses were performed. The SEM (scanning electron microscopy) analysis of the powder alloy revealed a good dimensional homogeneity, with a uniform colour, no agglutination and almost rounded particles, suitable for the powder bed fusion procedure...

In this study, a series of Ti-5Cr-xNb alloys with varying Nb content (ranging from 1 to 40 wt.%) were investigated to assess their suitability as implant materials. Comprehensive analyses were conducted, including phase analysis, microscopy examination, mechanical testing, and corrosion resistance evaluation. The results revealed significant structural alterations attributed to Nb addition, notably suppressing the formation of the ω phase and transitioning from α' + β + ω to single β phase structures...

SiC-fiber-reinforced Al-Mg matrix composites with different mass fractions of Mg were fabricated by combining colloidal dispersion with a squeeze melt infiltration process. The microstructure, mechanical and damping properties, and the corresponding mechanisms were investigated. Microstructure analyses found that SiCf /Al-Mg composites presented a homogeneous distribution of SiC fibers, and the relative density was higher than 97% when the mass fraction of Mg was less than 20%; the fiber-matrix interface bonded well, and no obvious reaction occurred at the interface...

In this study, concurrent enhancements in both strength and ductility of the Al-2Li-2Cu-0.5Mg-0.2Zr cast alloy (hereafter referred to as Al-Li) were achieved through an optimized forming process comprising ultrasonic treatment followed by squeeze casting, coupled with the incorporation of Sc. Initially, the variations in the microstructure and mechanical properties of the Sc-free Al-Li cast alloy (i.e., alloy A) during various forming processes were investigated. The results revealed that the grain size in the UT+SC (ultrasonic treatment + squeeze casting) alloy was reduced by 76...

MAX phases have great research value and application prospects, but it is challenging to synthesize the MAX phases containing Cd and Sb for the time being. In this paper, we confirmed the existence of the 312 MAX phases of Zr3 CdC2 and Zr3 SbC2 , both from theoretical calculations and experimental synthesis. The Zr3 AC2 (A = Cd, Sb) phase was predicted by the first-principles calculations, and the two MAX phases were confirmed to meet the requests of thermal, thermodynamic, and mechanical stabilities using formation energy, phonon dispersion, and the Born-Huang criteria...

Iridoid components have been reported to have significant neuroprotective effects. However, it is not yet clear whether the efficacy and mechanisms of iridoid components with similar structures are also similar. This study aimed to compare the neuroprotective effects and mechanisms of eight iridoid components (catalpol (CAT), genipin (GE), geniposide (GEN), geniposidic acid (GPA), aucubin (AU), ajugol (AJU), rehmannioside C (RC), and rehmannioside D (RD)) based on corticosterone (CORT)-induced injury in PC12 cells...

A plastic injection waste known as "purge" cannot be reintegrated into the recycling chain due to its shape, size, and composition. Grinding these cannot be carried out with traditional mills due to significant variations in size and shape. This work proposes a process and the design of a device that operates with solar energy to cut the purges without exceeding the degradation temperature. The size reduction allows reprocessing, revalorization, and handling. The purges are mixtures of processed polymers, so their characterization information is unavailable...

In order to prepare polyimide (PI) films with a low dielectric constant and excellent comprehensive performance, a two-step method was employed in this study to integrate β-cyclodextrin into a semi-aromatic fluorine-containing polyimide ternary system. By introducing trifluoromethyl groups to reduce the dielectric constant, the dielectric constant was further reduced to 2.55 at 10 MHz. Simultaneously, the film exhibited noteworthy thermal stability (a glass transition temperature exceeding 300 °C) and a high coefficient of thermal expansion...

This report aims to examine the effects of impact velocity, impact depth, and impact orientation on the Cu-Ta weld joint of the explosive welding process via MD simulation. The findings indicate that the residual shear stress in the welded block mostly increases as the impact velocity rises. The bottom Ta block is more severely distorted than the higher Cu block due to the impact direction. During the tensile test, three stress zones can be identified including the low-stress Cu block, the high-stress Ta block, and the medium-stress weld joint in the middle of the samples...

OBJECTIVES: To evaluate the effectiveness and safety of two different intravenous methylprednisolone (IVMP) pulse doses in patients with severe microscopic polyangiitis (MPA) and granulomatosis with polyangiitis (GPA). METHODS: We emulated a target trial using observational data from the nationwide registry in Japan. Patients with severe glomerulonephritis or diffuse alveolar haemorrhage were selected and pseudo-randomised into three groups using propensity score-based overlap weighting as follows: non-IVMP, IVMP 0...

OBJECTIVES: Prospective long-term observational data on the disease course of anti-neutrophil cytoplasmic antibody (ANCA)-associated vasculitis (AAV) were missing in Germany to date. Therefore, the Joint Vasculitis Registry in German-speaking countries (GeVas) has been established to follow the course of patients with AAV. The aim of this study is to present baseline data of patients with newly diagnosed and relapsing AAV enrolled in the GeVas registry. METHODS: GeVas is a prospective, web-based, multicentre, clinician-driven registry for the documentation of organ manifestations, damage, long-term outcomes, and therapy regimens in various types of vasculitis...

Differentiation between granulomatosis with polyangiitis (GPA) limited to the upper airways and cocaine-induced midline destructive lesion (CIMDL) may be particularly difficult because of their common histopathologic features and antineutrophil cytoplasmic antibody (ANCA) profiles. We herein present a case involving a young woman with an initial diagnosis of GPA based on upper and lower airway manifestations and constitutional symptoms, histopathologic evidence of granulomas, a positive cytoplasmic ANCA indirect immunofluorescent test result, and proteinase 3 positivity by enzyme-linked immunosorbent assay (ELISA)...

Transition metal nitrides have great potential applications as incompressible and high energy density materials. Various polymeric nitrogen structures significantly affect their properties, contributing to their complex bonding modes and coordination conditions. Herein, we first report a new manganese polynitride MnN4 with bifacial trans-cis [N4 ] n chains by treating with high-pressure and high-temperature conditions in a diamond anvil cell. Our experiments reveal that MnN4 has a P -1 symmetry and could stabilize in the pressure range of 56-127 GPa...

Electride possesses electrons localized at interstitial sites without attracting nuclei. It brings outstanding material properties not only originating from its own loosely bounded characteristics but also serving as a quasiatom, which even chemically interacts with other elemental ions. In elemental metals, electride transitions have been reported in alkali metals where valence electrons can easily gain enough kinetic energy to escape nuclei. However, there are few studies on transition metals. Especially iron, the key element of human technology and geophysics, has not been studied in respect of electride formation...

The electronic structures and elastic properties of metastable Zr3 N4 phases have been investigated using the first-principles calculations with the Heyd-Scuseria-Ernzerhof (HSE06) hybrid functional, in comparison with those of the stable ZrN phase. All three metastable Zr3 N4 phases (including orthorhombic, spinel and Th3 P4 -type phases) are found to be semiconducting with bandgaps of 1.72-1.94 eV. In particular, the computationally indirect bandgap of 1.72 eV of orthorhombic Zr3 N4 is consistent with the experimental value of 1...

In this study, we investigate the potential of the 18-crown-6-like two-dimensional (2D)-N8 structure to accommodate electrons from metals without compromising its covalent nitrogen network. Employing the crystal structure prediction enhanced by evolutionary algorithm and density functional theory methodology, we successfully predicted the existence of 16 layered M@2D-N8 complexes from a total of 39 MN8 systems investigated at 100 GPa (M = s-block Na-Cs, Be-Ba and d-block Ag, Au, Cd, Hg, Hf, W, and Y). Among those, there are 13 quenchable M@2D-N8 compounds that are dynamically stable at 1 atm...

The strength-ductility trade-off has long been a Gordian knot in conventional metallic structural materials and it is no exception in multi-principal element alloys. In particular, at ultrahigh yield strengths, plastic instability, that is, necking, happens prematurely, because of which ductility almost entirely disappears. This is due to the growing difficulty in the production and accumulation of dislocations from the very beginning of tensile deformation that renders the conventional dislocation hardening insufficient...

With impressive individual properties, carbon nanotubes (CNTs) show great potential in constructing high-performance fibers. However, the tensile strength of as-prepared carbon nanotube fibers (CNTFs) by floating catalyst chemical vapor deposition (FCCVD) is plagued by the weak intertube interaction between the essential CNTs. Here, we developed a chlorine (Cl)/water (H2 O)-assisted length furtherance FCCVD (CALF-FCCVD) method to modulate the intertube interaction of CNTs and enhance the mechanical strength of macroscopic fibers...

The present work aims to develop a production method of pre-sintered zirconia-toughened-alumina (ZTA) composite blocks for machining in a computer-aided design and computer-aided manufacturing (CAD-CAM) system. The ZTA composite comprised of 80% Al2 O3 and 20% ZrO2 was synthesized, uniaxially and isostatically pressed to generate machinable CAD-CAM blocks. Fourteen green-body blocks were prepared and pre-sintered at 1000 °C. After cooling and holder gluing, a stereolithography (STL) file was designed and uploaded to manufacture disk-shaped specimens projected to comply with ISO 6872:2015...

Understanding the nanoscale elastic-size-effects of atomically thin transition-metal dichalcogenides (TMDs) as a function of thickness underpins the avenue of flexible 2D electronics. In this work, we employed the atomic force acoustic microscopy (AFAM) technique to investigate the thickness-dependent elastic properties of CVD grown 2H-MoS2 films. The monolayer MoS2 exhibited a Young's modulus of 273 ± 27 GPa. Our systematic analysis from bulk to monolayer suggests that the 2H-MoS2 phase exhibits nanoscale elastic-stiffening behavior with decreasing number of layers (thickness)...