Sodium Polyacrylate

This study investigated the interaction of monovalent cations with different sizes on quartz surfaces and the rheological impact that this causes in concentrated suspensions when subjected to the action of a rheological modifier, in this case, sodium polyacrylate (NaPA). Yield stress was determined using a rheometer with a vane-in-cup configuration to establish the relationship between shear stress and strain. Experiments were carried out in LiCl, NaCl, KCl, and CsCl solutions. The results show that the yield stress increases following the order Li < Na < K < Cs in the absence of PAA...

Solid-phase reversible immobilization (SPRI) bead technology is widely used in molecular biology for convenient DNA manipulation. However, commercial SPRI bead kits lack cost advantages and flexibility. It is, therefore, necessary to develop new and alternative cost-effective methods of on-par or better quality. Herein, an easy and cost-effective method is proposed for synthesizing polyacrylic acid-coated iron oxide nanoparticles (PAA-IONPs) through in situ polymerization at lab scale for high-efficiency nucleic acid extraction and size selection...

The feasibility of producing high-density sintered magnesia with a one-step sintering method was investigated by utilizing finely ground magnesite as raw materials for direct flotation. The mechanism of flotation desilication of microfine grain magnesite was investigated by combining microstructure and chemical properties. The results showed that dodecylamine (DDA) has a sorting effect on magnesite reverse flotation desilication. Under the premise of 150 mg/L sodium polyacrylate (PAANa) as an inhibitor and 300 mg/L DDA as a collector, the content and recovery rate of MgO can reach 83...

Sodium ions are commonly found in natural water sources, and their high concentrations can potentially lead to adverse effects on both the water sources and soil quality. In this study, we successfully synthesized potassium polyacrylate (KMAA) hydrogel through free radical polymerization and evaluated its capability to remove sodium ions from and supply potassium ions to aqueous solutions. To assess its performance, inductively coupled plasma emission spectroscopy (ICP) was employed to analyze the sodium ion removal capacity and potassium ion exchange capability of the KMAA hydrogel at various initial sodium ion concentrations and pH values...

Superabsorbers based on crosslinked sodium polyacrylate polymers cannot be easily recycled, resulting in 2 million tons of superabsorbers being landfilled or burned every year. A fast and efficient strategy to recycle superabsorbers would significantly alleviate environmental pollution and promote a sustainable use of these polymers. Herein, the rapid recycling of crosslinked sodium polyacrylate hydrogels based on their inherent UV degradation is demonstrated without the need for chemicals besides water. A quantitative conversion of crosslinked sodium polyacrylate into soluble sodium polyacrylate is achieved in minutes, almost 200 times faster than a previous approach based on de-esterification...

Poor cementation between soil particles is a fundamental cause of soil erosion and desertification. In recent decades, many polymers have been used to cement soil particles and improve the physical and chemical properties of soils. The contributions of polymers with different structures and functional groups to soil improvement vary considerably. In this study, a mixture comprising polyacrylamide (PAM), sodium polyacrylate (PAAS), hydroxypropyl methylcellulose (HPMC), and polyvinyl alcohol (PVA) was investigated to meet the requirements of soil water retention, erosion resistance, and plant growth...

Protective coatings for bronze relics should adhere to the basic principles of cultural relic preservation, such as not altering the color and appearance of the artifacts, and being moderately combined with the artifacts to resist erosion due to external environments (such as water and gas). This paper presents the development of a physically crosslinked supramolecular hydrogel produced from guanidinium-based chitosan (GC). The hydrogel exhibits the excellent adsorption protection of bronze, and the addition of clay enhances the water barrier properties of the chitosan film...

Dentin bond interface stability is the key issue of dental adhesion in present clinical dentistry. The concept of selective extrafibrillar demineralization has opened a new way to maintain intrafibrillar minerals to prevent interface degradation. Here, using ultra-high-molecular-weight sodium polyacrylate [Carbopol (Carbo) > 40 kDa] as a calcium chelator, we challenge this concept and propose a protocol for reliable dentin dry bonding. The results of high-resolution transmission electron microscopy revealed periodic bands of 67 nm dentin collagen fibrils after Carbo etching, and the hydroxyproline concentration increasing with prolonged chelating time denied the concept of extrafibrillar demineralization...

The commercial application of surfaces with superhydrophilic (SHPL) properties is well known as an efficient strategy to address problems such as anti-fogging, anti-frosting, and anti-biological contamination. However, current SHPL coatings are limited by their poor water and abrasion resistances. Thus, herein, to solve these problems active glass was employed as a substrate, and a stable and transparent SHPL solution was prepared via the spraying process. Aqueous polyacrylic resin (PAA), SiO2 nanoparticles (NPs), tetraethyl orthosilicate (TEOS), and sodium allyl sulfonate (SDS) were utilized as the four main components of the PAA-TEOS-SiO2 coating...

BACKGROUND: Bowel obstruction due to accidental ingestion of foreign objects occurs rarely in children because 80 to 90% of the objects can pass freely through the gastrointestinal tract. CASE REPORT: We report a case of a 14-month-old infant who presented bowel obstruction caused by the ingestion of hydrogel beads (sodium polyacrylate). Hydrogel beads are used as sensory and didactic toys that can increase their initial size 200 to 400 times by liquid absorption...

The anti-washout ability of calcium phosphate cement (CPC) determines its effectiveness in clinical application. In the current research, the common method for improving the anti-washout ability of CPC is to add anti-washout polymer agents. Sodium polyacrylate powder is an excellent anti-washout agent but when bonded with CPC it basically degrades the anti-washout performance of CPC after γ-ray irradiation, and is widely used in the sterilization process of CPC products. Therefore, we propose a method for the preparation of a sodium polyacrylate solution through irradiation polymerization as curing solution for CPC...

Sodium sulfate decahydrate (Na2 SO4 . 10H2 O, SSD), a low-cost phase change material (PCM), can store thermal energy. However, phase separation and unstable energy storage capacity (ESC) limit its use. To address these concerns, eight polymer additives-sodium polyacrylate (SPA), carboxymethyl cellulose (CMC), Fumed silica (SiO2 ), potassium polyacrylate (PPA), cellulose nanofiber (CNF), hydroxyethyl cellulose (HEC), dextran sulfate sodium (DSS), and poly(sodium 4-styrenesulfonate) (PSS)-were used to explore several stabilization mechanisms...

With the growing demands of human beings, sanitary landfill, along with the increase in landfill depth and leachate water pressure, has put forward new and higher requirements for the impermeable layer. In particular, it is required to have a certain adsorption capacity of harmful substances from the perspective of environmental protection. Hence, the impermeability of polymer bentonite-sand mixtures (PBTS) at different water pressure and the adsorption properties of polymer bentonite (PBT) on contaminants were investigated through the modification of PBT using betaine compounded with sodium polyacrylate (SPA)...

In this study, a series of novel hydrophobic/hydrophilic hybrid (HHH) coatings with the feature of preventing the fouling phenomenon was fabricated based on polydimethylsiloxane (PDMS), as matrix and two hydrophilic polymers: chitosan and sodium polyacrylate, as dispersed phases. Antibacterial activity, pseudo-barnacle adhesion strength, surface free energy, water contact angle, and water absorption were performed for all samples. Evaluating field immersion of the samples was performed in the natural seawater...

Direct drug administration to the esophagus faces several obstacles, including continuous salivary dilution and removal of the dosage form from the tissue surface due to esophageal peristalsis. These actions often result in short exposure times and reduced concentrations of drug at the esophageal surface, providing limited opportunities for drug absorption into or across the esophageal mucosa. A variety of bioadhesive polymers were investigated for their ability to resist removal by salivary washings using an ex vivo porcine esophageal tissue model...

Nonsteroidal anti-inflammatory drugs (NSAIDs) have been widely used in the treatment of inflammatory pain, such as in osteoarthritis. Ketorolac tromethamine is considered to be an NSAID with strong anti-inflammatory and analgesic potency, however, traditional applications, such as oral administration and injections, often induce high systemic exposure, leading to adverse events such as gastric ulceration and bleeding. To address this key limitation, herein we designed and fabricated a topical delivery system for ketorolac tromethamine via cataplasm, which is based on a three-dimensional mesh structure formed by the cross-linking of dihydroxyaluminum aminoacetate (DAAA) and sodium polyacrylate...

Designing a functional and efficient blood-clotting agent is a major challenge. In this research, hemostatic scaffolds (GSp) were prepared from the superabsorbent, inter-crosslinked polymer sodium polyacrylate (Sp) bound to a natural protein gelatin (G) loaded with thrombin (Th) by a cost-effective freeze-drying method. Five compositions were grafted (GSp0.0, Gsp0.1, GSp0.2, GSp0.3, GSp0.3-Th) where the concentration of Sp varied but the ratios of G remained the same. The fundamental physical characteristics that increased the amounts of Sp with G gave synergistic effects after interacting with thrombin...

This study developed an antifouling coating for polyethersulfone (PES) membranes by tuning the bandgap of TiO2 with Cu nanoparticles (NPs) via a polyacrylic acid (PAA)-plasma-grafted intermediate layer. Cu NPs were synthesized at different molar ratios and precipitated onto TiO2 using the sol-gel method. The resulting Cu@TiO2 photocatalysts were characterized using various techniques, showing reduced bandgap, particle size range of 100-200 nm, and generation of reactive free radicals under light irradiation...

Quaternized poly(2-(dimethylamino) ethyl methacrylate)- b -poly(oligo(ethyleneglycol) methyl ether methacrylate) (QPDMAEMA- b -POEGMA) is a copolymer of a positively charged block and a non-ionic hydrophilic block. The positively charged block, QPDMAEMA, electrostatically interacts with oppositely charged polymers, e.g. , poly(acrylic acid) (PAA) and DNA, to form a complex. This complex is stable in aqueous solution due to the hydrophilic block, POEGMA, which provides colloidal stability and biocompatibility...

In this study, sodium alginate (SA), sodium polyacrylate (PAAS) and powdered activated carbon (PAC) were cross-linked by calcium ions [(Ca(II)] to form SA/PAAS/PAC (SPP) hydrogel beads. The hydrogel-lead sulfide (SPP-PbS) nanocomposites were successfully synthesized by in-situ vulcanization after the lead ions [(Pb(II)] adsorption. SPP showed an optimal swelling ratio (600% at the pH value of 5.0) and superior thermal stability (206 °C of heat-resistance index). The adsorption data of Pb(II) was compatible with the Langmuir model, and the maximum adsorption capacity of SPP was 391...