distal femur fracture

Intramedullary nailing is the gold standard of treatment for atypical femoral fractures, with a few reports of secondary atypical subtrochanteric femoral fractures following intramedullary nailing for atypical diaphyseal femoral fractures. However, there are no reports of secondary atypical diaphyseal femoral fractures following intramedullary nailing for atypical subtrochanteric femoral fractures. A 71-year-old woman with adult-onset Still's disease sustained a right atypical subtrochanteric femoral fracture and was treated with a mid-length intramedullary nail...

BACKGROUND: The aim of this study is to determine the best plate to use as a substitute to fix a medial femoral condyle fracture. MATERIALS AND METHODS: The first part is to measure the best fit between several anatomical plates including the Proximal Tibia Anterolateral Plate (PT AL LCP), the Proximal Tibia Medial Plate (PT M LCP), the Distal Tibia Medial Locking Plate (DT M LCP) and the Proximal Humerus (PHILOS) plate against 28 freshly embalmed cadaveric distal femurs...

Distal femur fractures are severe all over the world. The goal of the study was to assess the effect of physiotherapy on ROM, strength, and improving quality of life. Due to the anatomy of distal femur fracture, the Ilizarov ring fixator is useful as it helps maintain mobility and stability. Distal femur fractures are most treated surgically compared to non-surgical treatment. The use of external fixators differs according to the patient's condition and the stability of the patient. This study's objective was to evaluate the effectiveness of an evidence-based procedure prepared for the management of distal femur fracture and chronic osteomyelitis femur...

OBJECTIVE: Cemented total hip arthroplasty (THA) demonstrates superior survival rates compared to uncemented procedures. Nevertheless, most younger patients opt for uncemented THA, as removing well-fixed bone cement in the femur during revisions is complex, particularly the distal cement plug. This removal procedure often increases the risk of femoral fracture or perforation, haemorrhage and weakening bone due to poor drill control and positioning. Aim of this study was to design a novel drill guide to improve drill positioning...

Fragility fractures, which are more prevalent in women, may be significantly influenced by autophagy due to altered bone turnover. As an essential mediator of autophagy, Beclin-1 modulates bone homeostasis by regulating osteoclast and chondrocyte differentiation, however, the alteration in the local bone mechanical environment in female Beclin-1+/- mice remains unclear. In this study, our aim is to investigate the biomechanical behavior of femurs from seven-month-old female wild-type (WT) and Beclin-1+/- mice under peak physiological load, using finite element analysis on micro-CT images...

BACKGROUND: Insertion of a skeletal traction pin in the distal femur or proximal tibia can be a painful and unpleasant experience for patients with a lower-extremity fracture. The purpose of this study was to determine whether providing patients with audio distraction (AD) during traction pin insertion can help to improve the patient-reported and the physician-reported experience and decrease pain and/or anxiety during the procedure. METHODS: A prospective randomized controlled trial was conducted at 2 level-I trauma centers...

Background : Locked plating for distal femur fractures is widely recommended and used. We systematically reviewed clinical studies assessing the benefits and harms of fracture fixation with locked plates in AO/OTA Type 32 and 33 femur fractures. Methods : A comprehensive literature search of PubMed, Embase, Cinahl, Web of Science, and the Cochrane Database was performed. The studies included randomized and non-randomized clinical trials, observational studies, and case series involving patients with distal femur fractures...

PURPOSE: The optimal hinge position to prevent hinge fractures in medial closing wedge distal femoral osteotomy (MCWDFO) based on the biomechanical background has not yet been well examined. This study aimed to examine the appropriate hinge position in MCWDFO using finite element (FE) analysis to prevent hinge fractures. METHODS: Computer-aided design (CAD) models were created using composite replicate femurs. FE models of the MCWDFO with a 5° wedge were created with three different hinge positions: (A) 5 mm proximal to the proximal margin of the lateral epicondylar region, (B) proximal margin level and (C) 5 mm distal to the proximal margin level...

CASE: A 51-year-old man and 64-year-old woman with bilateral cruciate-retaining total knee arthroplasties (CR-TKAs) who sustained unilateral periprosthetic distal femur fractures above their CR-TKA and experienced knee instability secondary to an iatrogenic posterior-cruciate-ligament (posterior cruciate ligament [PCL]) injury from retrograde intramedullary nailing. Both patients recovered knee stability after undergoing revision surgery. CONCLUSION: Many CR-TKA designs have sufficient medial-lateral intercondylar distance to place a retrograde nail, femoral components with a relatively posterior transition from the trochlear groove to the intercondylar box will necessitate a nail starting point closer to the PCL origin...

OBJECTIVES: Functional expectations following the salvage of a failed osteoarticular allograft are poorly described. In this study, we aim to evaluate functional outcomes, implant survival, and complications of the megaprosthesis in salvaging a failed osteoarticular allograft around the knee. METHODS: We retrospectively reviewed the medical profiles of 21 skeletally mature patients who underwent megaprosthesis reconstruction to salvage a failed osteoarticular allograft around the knee implanted before skeletal maturity...

BACKGROUND: The stiffness of locked plates suppresses healing process, prompting the introduction of far cortical locking to address this issue. This study aimed to demonstrate the clinical efficacy of far cortical locking constructs in treating distal femoral fractures in an Asian population. METHODS: This multicenter prospective observational study was conducted at four university hospitals between February 2018 and February 2021. Demographic data, the presence of metaphyseal comminution, and surgical fixation details were recorded...

INTRODUCTION: Distal femur fractures account for 3-6% of all femur fractures. Internal fixation of most distal femur fractures with an anatomic lateral locking plate should permit some motion at the metaphyseal portion of the fracture when secondary bone healing is planned by the operating surgeon. While several studies have been performed evaluating union rates for distal femur fractures with stainless steel and titanium plates, the timing of callus formation between stainless steel and titanium implants used as bridge plates for distal femur fractures (AO/OTA 33-A and -C) has been investigated to a lesser extent...

BACKGROUND: Proximal-distal mismatch has emerged as a prominent concern in Dorr type A femoral morphology, prompting the exploration of short stems as promising alternatives to conventional stems. This study aimed to evaluate clinical and radiographic outcomes of total hip arthroplasty (THA) using short femoral stems in Dorr type A proximal femoral morphology with a minimum follow-up of 5 years. METHODS: Patients with short femoral stems in Dorr type A between 2011 and 2017 were included...

BACKGROUND: Intra-articular and periarticular distal femur fractures with pre-existing osteoporosis (OP) and osteoarthritis (OA) pose a significant challenge to ambulatory patients because of the higher chances of implant failure and severe disability of OA. To reduce OA-related morbidity, we advocate simultaneous total knee arthroplasty (TKA) with fracture fixation instead of fracture fixation alone using computer-assisted navigation to achieve proper ligament balance, restoration of the mechanical axis, and component alignment...

INTRODUCTION: Non-ossifying fibroma (NOF) is a common benign fibrogenic bone lesion commonly found in the metaphysis of long bones. While small NOFs are typically asymptomatic and left untreated, large NOFs are often associated with pathologic fractures that can be treated conservatively or operatively. To our knowledge, the NOF presented in this case report is one of the largest reported in the literature. CASE REPORT: We present a case of a 12-year-old Hispanic female who presented to our institution after falling off a horse and landing on her right leg and wrist...

INTRODUCTION: The selection of the most optimal fixation method for fractures of the distal femur, whether intramedullary nail (NL), lateral locking plate (PL), or nail/plate (NP) is not always clear. This study retrospectively evaluates surgical patients with distal femur fractures and introduces a pilot study using cluster analysis to identify the most optimal fracture fixation method for a given fracture type. METHODS: This is a retrospective cohort study of patients 18 years and older with an isolated distal femur fracture who presented to our Level-1 trauma center between January 1, 2012, and December 31, 2022, and obtained NL, PL, or NP implants...

BACKGROUND: Proximal femur fractures constitute a public health concern given their high frequency and the aging population. The frequency of a contralateral fracture occurring can reach up to 15% of cases. Certain historical or demographic factors constitute risk factors for refracture, but the type of fracture, either of the femoral neck (FN) or pertrochanteric (PT), cannot be predicted. The objectives of this retrospective study were: 1) to analyze several anatomical markers in order to determine whether they predispose to a certain type of fracture in the event of contralateral refracture, 2) to determine the predictive power of these possible radiological markers for the type of contralateral fracture...

We describe a trifocal femur injury with intracapsular femoral neck fracture, diaphyseal fracture with bone loss, and distal complete articular (AO/OTA C type) fracture, an injury rarely described in the literature. Surgical management utilized a not-yet-reported implant combination: screw-side plate device for the intracapsular femoral neck, retrograde nail for the diaphysis, and lag screws plus mini fragment buttress plating for the distal fracture. The patient had uneventful fracture union with no changes in alignment...

OBJECTIVES: The objective of this study was to compare the biomechanical properties of locked and nonlocked diaphyseal fixation in a model of distal femur fractures using osteoporotic and nonosteoporotic human cadaveric bone. METHODS: A supracondylar osteotomy was created to mimic a fracture (OTA/AO 33A3) in osteoporotic (n = 4) and nonosteoporotic (n = 5) cadaveric distal femurs. The left and right femurs of each pair were instrumented with a distal femoral locking plate and randomly assigned to have diaphyseal fixation with either locked or nonlocked screws...

PURPOSE: The aim of our study was to analyze the clinical and radiological outcomes of conversion total hip arthroplasty (THA) for failed fixation of proximal femur fractures with monoblock grit-blasted titanium reconstruction stem (Wagner self-locking stem, Zimmer). PATIENTS AND METHODS: Thirty-nine patients were included in this retrospective analysis undergoing conversion THA for failed cephalomedullary nail or dynamic hip screw fixation for intertrochanteric fractures from January 2017 to January 2022...