Abs

Purpose To assess the feasibility of sparing routine antibiotic prophylaxis in patients without preoperative urinary tract infection (UTI) undergoing a ureterorenoscopy (URS) for stone removal. Patients and Methods A retrospective, monocentric study was conducted to evaluate the outcome of a modified perioperative antibiotic management strategy according to the principles of antibiotic stewardship (ABS). Patients with preoperative unremarkable urine culture received no antibiotic prophylaxis for ureterorenoscopic stone removal (NoPAP)...

This work investigates a downlink nonorthogonal multiple access (NOMA) scheme with unmanned aerial vehicle (UAV) aided wireless communication, where a single UAV was regarded as an air base station (ABS) to communicate with multiple ground users. Considering the constraints of velocity and maneuverability, a UAV energy efficiency (EE) model was proposed via collaborative design resource allocation and trajectory optimization. Based on this, an EE maximization problem was formulated to jointly optimize the transmit power of ground users and the trajectory of the UAV...

This study investigates nanoparticle emission during 3D printing processes, assessing various filament materials' impact on air quality. Commonly used 3D printers, including both filament and resin-based types, were examined. The study's scope encompasses diverse filament materials like ABS (acrylonitrile butadiene styrene), PLA (polylactic acid), PETG (polyethylene terephthalate glycol), ASA (acrylonitrile styrene acrylate), TPU (thermoplastic polyurethane), PP (polypropylene), nylon, and wood-based variants, alongside three types of resins...

The key to any controlled supramolecular polymerization (CSP) process lies in controlling the nucleation step, which is typically achieved by sequestering monomers in a kinetically trapped state. However, kinetic traps that are shallow cannot prevent spontaneous nucleation, thus limiting the applicability of the CSP in such systems. We use a molecular additive to overcome this limitation by modifying the energy landscape of a competitive self-assembly process and increasing the kinetic stability of an otherwise short-lived trap state...

The effects of polymethylene bridges on the chiroptical properties of trans -bis[(β-iminomethyl)naphthoxy]platinum(II) platforms were examined both experimentally and theoretically using newly designed planar chiral Pt analogues (1) having three-dimensional superstructures. A series of optically pure polymethylene-vaulted Pt complexes ( R )- and ( S )-1 were synthesized and characterized with regard to the chiroptical behaviour of the trans -bis[(β-iminomethyl)naphthoxy]platinum(II) platforms. These complexes were found to exhibit structure-dependent chiroptical characteristics in solution, such that the absolute values of specific rotation, the circular dichroism dissymmetry factor ( g abs ) and the circularly polarized luminescence dissymmetry factor ( g lum ) all increased upon shortening the polymethylene bridges...

Carbonaceous aerosols were collected in the valley city of Baoji city in Northern China in August 2022. The light absorption characteristics and influencing factors of black carbon (BC) and brown carbon (BrC) were analyzed, and their radiative forcing was estimated. The results showed that the light absorption of secondary brown carbon [AbsBrC,sec (370)] is 7.5 ± 2.4 Mm-1 , which is 2.5 times that of primary brown carbon [AbsBrC,pri (370), 3.0 ± 1.2 Mm-1 ]...

A plastic injection waste known as "purge" cannot be reintegrated into the recycling chain due to its shape, size, and composition. Grinding these cannot be carried out with traditional mills due to significant variations in size and shape. This work proposes a process and the design of a device that operates with solar energy to cut the purges without exceeding the degradation temperature. The size reduction allows reprocessing, revalorization, and handling. The purges are mixtures of processed polymers, so their characterization information is unavailable...

The article deals with the comparison of the bending behavior of cylindrical lattice samples with radially and orthogonally arranged cells made of ABS material. The structures were designed in PTC Creo Parametric 8 software, while four types of lattice structures were evaluated: Rhombus, Cuboidal BCC, Octagon, and Starry, in three material volume fractions: 44, 57, and 70%, together with tubular and rod-shaped samples. The Fused Filament Fabrication (FFF) technique was chosen for the production of ABS plastic samples...

The present work proposes to investigate the effect of an ultrahigh molecular weight silicone rubber (UHMW-SR) and two ethylene methyl acrylate copolymers (EMA) with different methyl acrylate (MA) content on the mechanical and fire performance of a fireproof acrylonitrile butadiene styrene copolymer (ABS) composite, with an optimum amount of ammonium polyphosphate (APP) and aluminum diethyl phosphinate (AlPi). ABS formulations with a global flame retardant weight content of 20 wt.% (ABS P) were melt-compounded, with and without EMA and UHMW-SR, in a Brabender mixer...

AIM: Evaluate the efficacy of sponge wipe sampling at recovering potential bacterial surrogates for Category A and B non-spore-forming bacterial bioterrorism agents from hard nonporous surfaces. METHODS: A literature survey identified seven nonpathogenic bacteria as potential surrogates for selected Category A and B non-spore-forming bacterial agents. Small (2- by 4-cm) and large (35.6- by 35.6-cm) coupons made from either stainless steel, plastic, or glass, were inoculated and utilized to assess persistence, and surface sampling efficiency, respectively...

Autoimmune haemolytic anaemia (AIHA) is an acquired heterogenous clinical entity with variable presentations like acute haemolysis or mild, chronic haemolysis compounded with acute exacerbation in winters or fatal uncompensated haemolysis. A step-wise approach to the diagnosis and characterisation of AIHA should be undertaken, firstly the diagnosis of haemolysis followed by the establishment of immune nature with the aid of direct agglutination tests (DAT). Simultaneously the other causes of immune haemolysis need to be excluded too...

End-of-life electric and electronic devices stand as one of the fastest growing wastes in the world and, therefore, a rapidly escalating global concern. A relevant fraction of these wastes corresponds to polymeric materials containing a plethora of chemical additives. Some of those additives fall within the category of hazardous organic compounds (HOCs). Despite the significant advances in the capabilities of analytical methods, the comprehensive characterization of WEEE plastic remains as a challenge. This research strives to identify the primary additives within WEEE polymers by implementing a non-target and suspect screening approach...

BACKGROUND AND OBJECTIVES: Relapses occur in 15%-25% of patients with leucine-rich glioma-inactivated 1 antibody (LGI1-Ab) autoimmune encephalitis and may cause additional disability. In this study, we clinically characterized the relapses and identified factors predicting their occurrence. METHODS: This is a retrospective chart review of patients with LGI1-Ab encephalitis diagnosed at our center between 2005 and 2022. Relapse was defined as worsening of previous or appearance of new symptoms after at least 3 months of clinical stabilization...

There is an urgent need for alternative therapies targeting human dendritic cells (DCs) that could reverse inflammatory syndromes in many autoimmune and inflammatory diseases and organ transplantations. Here, we describe a bispecific antibody (bsAb) strategy tethering two pathogen-recognition receptors at the surface of human DCs. This cross-linking switches DCs into a tolerant profile able to induce regulatory T-cell differentiation. The bsAbs, not parental Abs, induced interleukin 10 and transforming growth factor β1 secretion in monocyte-derived DCs and human peripheral blood mononuclear cells...

Based on their chemical structure and catalytic features, carbon dots (CDs) demonstrate great advantages for agricultural systems. The improvements in growth, photosynthesis, nutrient assimilation and resistance are provided by CDs treatments under control or adverse conditions. However, there is no data on how CDs can enhance the tolerance against chromium toxicity on gas exchange, photosynthetic machinery and ROS-based membrane functionality. The present study was conducted to evaluate the impacts of the different concentrations of orange peel derived-carbon dots (50-100-200-500 mg L-1 CD) on growth, chlorophyll fluorescence, phenomenological fluxes between photosystems, photosynthetic performance, ROS accumulation and antioxidant system under chromium stress (Cr, 100 μM chromium (VI) oxide) in Lactuca sativa...

While gilts and sows are regularly vaccinated against the porcine parvovirus (PPV), little is known on the presence of antibodies in vaccinated sows nor the decline of maternally derived antibodies (MDA) in their offspring. On twelve farms serum samples were taken from 180 gilts and sows vaccinated at least twice with one of three different commercial PPV vaccines. On nine farms, additional 270 serum samples were collected from growing pigs of three different age categories. All 450 samples were examined for PPV antibodies (Abs) by ELISA and haemagglutination inhibition (HI) assay...

There are a variety of nontreponemal test (NTT) and treponemal test (TT) kits for the serologic diagnosis of syphilis. Because of the complexity of the infection (multiple clinical stages) and the different antigens used in these kits, a systematic evaluation of the accuracy of the currently available commercial tests is warranted. Our objective was to evaluate the performance of commercially available tests for the diagnosis of syphilis infection. In this study, we analyzed one NTT (Venereal Disease Research Laboratory [VDRL] test, Wiener Laboratories, Rosario, Argentina) and two TTs (fluorescent treponemal antibody absorption [FTA-ABS] test, Euroimmun, Lübeck, Germany, and syphilis recombinant ELISA v...

In this study, organosilicon compounds were used as modifiers of filaments constituting building materials for 3D printing technology. Polymethylhydrosiloxane underwent a hydrosilylation reaction with styrene, octadecene, and vinyltrimethoxysilane to produce new di- or tri-functional derivatives with varying ratios of olefins. These compounds were then mixed with silica and incorporated into the ABS matrix using standard processing methods. The resulting systems exhibited changes in their physicochemical and mechanical characteristics...

BACKGROUND: Transcatheter aortic valve implantation (TAVI) did not receive regulatory approval in Australia until 2013, several years after Europe (2007) and America (2011). Consequently, the uptake of TAVI in Australia initially lagged behind international best practices. This study was undertaken to provide an update on the status of TAVI activity in Australia. METHOD: A descriptive population-level epidemiological study was performed. Annual activity data for both surgical aortic valve replacement (SAVR) and TAVI were obtained from the Australian Institute of Health and Welfare (AIHW) for the period from 1 July 2012 to 30 June 2022...

PURPOSE: The main aim of this study was to evaluate the type, parameters, loss and complications of contact lenses (CLs) in the treatment of paediatric aphakia over a 10-year period. METHODS: This retrospective multicentre chart review included the files of aphakic CL wearers under the age of 9 years old that were treated between 2008 and 2018. Patients with traumatic aphakia and scarring of the cornea were excluded. The following data were collected; demographic data, cataract type (congenital or secondary), CL type, parameters and wearing time, reason for replacement and discontinuation of the CLs, visual acuity (VA), prophylactic use of antibiotics (ABs), and complications...