Computed Tomography Based Rigidity Analysis

INTRODUCTION: Rigid bronchoscopy remains the gold standard for the diagnosis of foreign body aspiration (FBA) despite high rates of negative bronchoscopies. The use of computed tomography (CT) imaging in the assessment of FBA has recently emerged and could help obviate unnecessary bronchoscopy in these patients. The aim of this study is to assess the diagnostic accuracy of CT in the diagnosis of pediatric FBA. METHODS: A systematic literature review was conducted to identify studies reporting the use of CT imaging in suspected pediatric FBA...

In spine research, two possibilities to generate models exist: generic (population-based) models representing the average human and subject-specific representations of individuals. Despite the increasing interest in subject specificity, individualisation of spine models remains challenging. Neuro-musculoskeletal (NMS) models enable the analysis and prediction of dynamic motions by incorporating active muscles attaching to bones that are connected using articulating joints under the assumption of rigid body dynamics...

INTRODUCTION: Recent developments in the postoperative evaluation of deep brain stimulation surgery on the group level warrant the detection of achieved electrode positions based on postoperative imaging. Computed tomography (CT) is a frequently used imaging modality, but because of its idiosyncrasies (high spatial accuracy at low soft tissue resolution), it has not been sufficient for the parallel determination of electrode position and details of the surrounding brain anatomy (nuclei)...

Although reconstructive laminoplasty is commonly performed after resection of spinal intramedullary tumors of the cervical spine, its biomechanical rigidity of laminoplasty framework remains unclear. The objective of this study was to examine the structural reliability of our unique method of cervical lift-up basket laminoplasty by using computed tomography (CT)-based finite element analysis (FEA) and clinical radiological evaluation. A finite element model of cervical laminoplasty was created based on CT images using FEA software...

Background: To build a model of an anatomical plate for oblique lumbar interbody fusion (OLIF) surgery based on previous anatomical parameters and verify the biomechanical effect with finite element analysis. Methods: The anatomical plate model was built with AutoCAD and Solidworks. Finite element models of the L2-3 and L4-5 segments were established with computed tomography images from a 46-year-old asymptomatic male individual. Six fixation technique models were created: (I) stand-alone (SA); (II) bilateral pedicle screws (BPS); (III) lateral rod-screw (LRS); (IV) lateral rod-screw plus facet screw (LRSFS); (V) two-screw lateral plate (TSLP); (VI) anatomical plate...

In image-based finite element analysis of bone, partial volume effects (PVEs) arise from image blur at tissue boundaries and as a byproduct of geometric reconstruction and meshing during model creation. In this study, we developed and validated a material assignment approach to mitigate partial volume effects. Our validation data consisted of physical torsion testing of intact tibiae from N  = 20 Swiss alpine sheep. We created finite element models from micro-CT scans of these tibiae using three popular element types (10-node tetrahedral, 8-node hexahedral, and 20-node hexahedral)...

BACKGROUND: Cadaveric biomechanical studies indicated that atlantoaxial intraarticular fusion cages with posterior pedicle screws fixation could increase the multi-axial rigidity. However, the stress distribution of the fixation construct is still unclear. METHODS: From computed tomography images, a nonlinear intact three-dimensional C0-2 finite element model was developed and validated. Four finite element models were reconstructed: intact model, unstable model, bilateral atlantoaxial pedicle screws combined bilateral cages model, bilateral atlantoaxial pedicle screws model...

Even though hypomimia is a hallmark of Parkinson's disease (PD), objective and easily interpretable tools to capture the disruption of spontaneous and deliberate facial movements are lacking. This study aimed to develop a fully automatic video-based hypomimia assessment tool and estimate the prevalence and characteristics of hypomimia in de-novo PD patients with relation to clinical and dopamine transporter imaging markers. For this cross-sectional study, video samples of spontaneous speech were collected from 91 de-novo, drug-naïve PD participants and 75 age and sex-matched healthy controls...

Interventions for bone diseases (e.g. osteoporosis) require testing in animal models before clinical translation and the mouse tibia is among the most common tested anatomical sites. In vivo micro-Computed Tomography (microCT) based measurements of the geometrical and densitometric properties are non-invasive and therefore constitute an important tool in preclinical studies. Moreover, validated micro-Finite Element (microFE) models can be used for predicting the bone mechanical properties non-invasively. However, considering that the image processing pipeline requires operator-dependant steps, the reproducibility of these measurements has to be assessed...

In some patients, the passage of semi-rigid ureteroscopes up the ureter is impossible due to narrow ureteral lumen. We established a neural network to predict the inability of the ureter to accommodate the semi-rigid ureteroscope and the need for active or passive dilatation using non-contrast computed tomography (CT) images. Data were collected retrospectively from two centers of 1989 eligible patients who underwent ureteroscopic lithotripsy with ureteral stones. Patients were categorized into two groups: control and narrow ureter...

BACKGROUND: Coronary 18 F-sodium-fluoride (18 F-NaF) positron emission tomography (PET) showed promise in imaging coronary artery disease activity. Currently image processing remains subjective due to the need for manual registration of PET and computed tomography (CT) angiography data. We aimed to develop a novel fully automated method to register coronary 18 F-NaF PET to CT angiography using pseudo-CT generated by generative adversarial networks (GAN). METHODS: A total of 169 patients, 139 in the training and 30 in the testing sets were considered for generation of pseudo-CT from non-attenuation corrected (NAC) PET using GAN...

Objective: To find a preoperative computed tomography-based method to predict the incidence of sacral screw loosening and assist surgical planning. Methods: Surgically treated patients for degenerative lumbosacral disorders with rigid pedicle screw fixation of patients with L5-S1 vertebra in our center from January 2016 to January 2021 were retrospectively included in the current study. CT scan attenuation of the horizontal plane of the sacrum was measured with Hounsfield units (HU)...

Purpose: The current algorithms for measuring ventilation images from 4D cone-beam computed tomography (CBCT) are affected by the accuracy of deformable image registration (DIR). This study proposes a new deep learning (DL) method that does not rely on DIR to derive ventilation images from 4D-CBCT (CBCT-VI), which was validated with the gold-standard single-photon emission-computed tomography ventilation image (SPECT-VI). Materials and Methods: This study consists of 4D-CBCT and 99mTc-Technegas SPECT/CT scans of 28 esophagus or lung cancer patients...

Radiostereometic analysis (RSA) is an accurate method for rigid body pose (position and orientation) in three-dimensional space. Traditionally, RSA is based on insertion of periprosthetic tantalum markers and manual implant contour selection which limit clinically application. We propose an automated image registration technique utilizing digitally reconstructed radiographs (DRR) of computed tomography (CT) volumetric bone models (autorsa-bone) as a substitute for tantalum markers. Furthermore, an automated synthetic volumetric representation of total knee arthroplasty implant models (autorsa-volume) to improve previous silhouette-projection methods (autorsa-surface)...

PURPOSE: The purpose of this paper is to present a method for registration of 3D computed tomography to 2D single-plane fluoroscopy knee images to provide 3D motion information for knee joints. This 3D kinematic information has unique utility for examining joint kinematics in conditions such as ligament injury, osteoarthritis and after joint replacement. METHODS: We proposed a non-invasive rigid body image registration method which is based on two different multimodal similarity measures...

Three-dimensionally-printed aortic templates are increasingly being used to aid in the modification of stent grafts in the treatment of urgent, complex aortic disorders, often of an emergency nature. The direct contact between the aortic template and the stent graft implies the necessity of complete sterility. Currently, the efficacy of sterilizing aortic templates and the effect of sterilization on the geometry of tubular aortic models are unknown. A complex case of aortic arch dissection was selected to prepare a 3D-printed aortic arch template, which was then manufactured in six popular printing materials: polylactic acid (PLA), nylon, polypropylene (PP), polyethylene terephthalate glycol (PETG), and a rigid and flexible photopolymer resin using fused deposition modeling (FDM) and stereolithography (SLA)...

PURPOSE: Absorbed dose calculation in magnetic resonance-guided radiation therapy (MRgRT) is commonly based on pseudo CT (pCT) images. This study investigated the feasibility of unsupervised pCT generation from MRI using a cycle generative adversarial network (CycleGAN) and a heterogenous multicentric dataset. A dosimetric analysis in three-dimensional conformal radiotherapy (3DCRT) planning was also performed. MATERIAL AND METHODS: Overall, 87 T1-weighted and 102 T2-weighted MR images alongside with their corresponding computed tomography (CT) images of brain cancer patients from multiple centers were used...

PURPOSE: To accurately quantify local seed displacement from Day 0 to Day 30 for our brachytherapy procedure. To quantify seed loss/migration and to identify the locations from where seeds are missing. METHODS AND MATERIALS: Seed displacements were analyzed in 62 consecutive patients, who received brachytherapy with stranded I-125 seeds. At the start of the procedure, four fiducial gold markers were implanted. At the end of the implantation procedure an in-room 3D CBCT scan (Day 0) was acquired for accurate seed localization...

Toward clarifying the biomechanics and neural mechanisms underlying coordinated control of the complex hand musculoskeletal system, we constructed an anatomically based musculoskeletal model of the Japanese macaque ( Macaca fuscata ) hand, and then estimated the muscle force of all the hand muscles during a precision grip task using inverse dynamic calculation. The musculoskeletal model was constructed from a computed tomography scan of one adult male macaque cadaver. The hand skeleton was modeled as a chain of rigid links connected by revolute joints...

PURPOSE: Observed gross tumor volume (GTV) shrinkage during radiotherapy (RT) raises the question of whether to adapt treatment to changes observed on the acquired images. In the literature, two modes of tumor regression have been described: elastic and non-elastic. These modes of tumor regression will affect the safety of treatment adaptation. This study applies a novel approach, using routine cone-beam computed tomography (CBCT) and deformable image registration to automatically distinguish between elastic and non-elastic tumor regression...