Read by QxMD icon Read


Raffaele Balsamo, Ester Illiano, Alessandro Zucchi, Franca Natale, Antonio Carbone, Marco De Sio, Elisabetta Costantini
OBJECTIVE: The aim of this study was to compare the surgical, anatomical, and functional outcomes of sacrocolpopexy (SCP) using polyvinylidene fluoride (PVDF) mesh versus SCP using the standard polypropylene (PP) mesh. STUDY DESIGN: This was a retrospective single centre case-control study including female patients who underwent laparoscopic or abdominal SCP for POP with either PP (Cousin Biotech® ) or PVDF (DynaMesh® -PRS) mesh between March 2005 and May 2015...
January 2018: European Journal of Obstetrics, Gynecology, and Reproductive Biology
Rita Rynkevic, Pedro Martins, Francisco Pereira, Nilza Ramião, António A Fernandes
The use of prostheses for hernia surgery, made from synthetic polymers may lead to development of postoperative complications. The reason for this can be the mismatch of the mechanical properties of meshes and the loads acting on them. The aim of this work was to investigate the behavior of 3 different hernia meshes under in vitro simulated physiological conditions followed by cyclic loadings. Meshes, Ultrapro (poliglecaprone and polypropylene), Dynamesh (polyvinylidenefluoride) and Surgipro (polypropylene) were selected...
September 27, 2017: Journal of Materials Science. Materials in Medicine
Zhaowei Zhou, Amarvir Bilkhu, Suhail Anwar
AIMS: The use of synthetic meshes in potentially infected operative fields such as in the vicinity of large bowel, is controversial. This study describes our experience with the use of a synthetic composite mesh for prophylaxis and repair of parastomal hernias. METHODS: Data were collected retrospectively over a 7-year period from 2008 to 2015. An IPOM (DynaMesh™) was used either during the formation of the stoma to reinforce the abdominal wall around the stoma or during the surgical repair of existing parastomal hernias, using keyhole or sandwich technique...
September 2017: International Journal of Surgery
Raquel Conde-Muíño, José-Luis Díez, Alberto Martínez, Francisco Huertas, Inmaculada Segura, Pablo Palma
BACKGROUND: Parastomal hernia is a very common complication after stoma formation. Current surgical techniques for repairing parastomal hernia have unsatisfactory results. We aim to assess our preliminary experience with prophylactic mesh placement at the time of stoma formation. METHODS: Data were prospectively recorded. A specifically designed mesh made of polyvinyl fluoride with central conduit (Dynamesh IPST®) was fixed using an intra-peritoneal onlay technique...
April 19, 2017: BMC Surgery
F Kallinowski, F Harder, T G Silva, A Mahn, M Vollmer
PURPOSE: Ventral hernia repair can be performed safely using meshes which are primarily stable upon dynamic intermittent straining (DIS) at recommended overlap. In specific clinical situations, e.g., at bony edges, bridging of the hernial orifice with reduced overlap might be necessary. To gain insight into the durability of various applications, two different meshes with the best tissue grip known so far were assessed. METHODS: The model uses dynamic intermittent strain and comprises the repetition of submaximal impacts delivered via a hydraulically driven plastic containment...
June 2017: Hernia: the Journal of Hernias and Abdominal Wall Surgery
Paola Zarur Varella, Nicolau Gregori Czeczko, Manoel Alberto Prestes, Alexandre Eduardo Augustin Czeczko, Marília da Cruz Fagundes, Roberta Dombroski Petisco
PURPOSE: To investigate whether there is a difference between Marlex(r) and Dynamesh PP-light Marlex(r) meshes, in the abdominal wall defect correction, on rats in contaminated surgical site. METHODS: Twenty-eight Wistar rats were divided into two groups of 14, and four subgroups of seven animals. All subgroups underwent similar surgical procedure. One group received the mesh Marlex(r) and the other Dynamesh PP-light(r) for correction of the defect. Before implanting, the meshes went through a contamination process, on which was used standard solution containing 10 UFC of Escherichia coli...
October 2016: Acta Cirúrgica Brasileira
L D'Amore, F Ceci, S Mattia, M Fabbi, P Negro, F Gossetti
BACKGROUND: In ventral hernia repair, when prosthetic material is placed intraperitoneally, it may lead to an inflammatory reaction resulting in adhesions between the mesh and abdominal viscera. Several meshes have been developed to minimize this process. In this experimental study, the ability of different combined meshes to attenuate the adhesion formation was examined. METHODS: Three commercially available lightweight porous combined meshes were placed intraperitoneally to repair an abdominal wall defect in rats: DynaMesh-IPOM (PVDF + PP), TiMesh (titanium-coated filament PP) and C-QUR/FX (omega-3 fatty acid-coated filament PP)...
February 2017: Hernia: the Journal of Hernias and Abdominal Wall Surgery
A Tandon, K Shahzad, S Pathak, C M Oommen, Q M Nunes, N Smart
INTRODUCTION Laparoscopic incisional and ventral hernia repair (LIVHR) is widely accepted and safe but the type of mesh used is still debated. We retrospectively compared postoperative outcomes with two different meshes commonly used in LIVHR. METHODS This is a retrospective study of patients who underwent incisional hernia repair between January 2008 and December 2010. Two meshes were used: Parietex™ Composite (Covidien, New Haven, CT, USA) and the DynaMesh® -IPOM (FEG Textiltechnik mbH, Aachen, Germany)...
November 2016: Annals of the Royal College of Surgeons of England
Agnieszka Tomaszewska
PURPOSE: There is a discussion in literature concerning mechanical properties and modelling of surgical meshes. An important feature of elastic modulus dependency on load history is taken into account in this paper, as implants are subjected to variable loading during human activity. The example of DynaMesh®-IPOM surgical implant is studied. METHODS: The analysis is based on failure tension tests and cyclic loading and unloading tests performed for the material samples...
2016: Acta of Bioengineering and Biomechanics
Alessandro Verbo, Paolo Pafundi, Alberto Manno, Rocco Bacccaro, Augusto Veneziani, Rosa Colli, Claudio Coco
BACKGROUND: Laparoscopic approach is now generally accepted for the treatment of incisional hernia. The ideal mesh is still to be found. The aim of this study is to compare the well-known Gore® DUALMESH® Plus (WL Gore & Associates, Flagstaff, AZ) to a new prosthesis, the DynaMesh®-IPOM (FEG Textiltechnik GmbH, Aachen, Germany), to clinically verify its potential benefits in the laparoscopic treatment of incisional hernia. MATERIALS AND METHODS: Comparing the results of the laparoscopic treatment of two groups of patients affected by incisional hernia using Gore® DUALMESH® Plus and DynaMesh®-IPOM...
April 2016: Surgical Technology International
A Cordero, B Hernández-Gascón, G Pascual, J M Bellón, B Calvo, E Peña
The aim of this study was to obtain information about the mechanical properties of six meshes commonly used for hernia repair (Surgipro(®), Optilene(®), Infinit(®), DynaMesh(®), Ultrapro™ and TIGR(®)) by planar biaxial tests. Stress-stretch behavior and equibiaxial stiffness were evaluated, and the anisotropy was determined by testing. In particular, equibiaxial test (equal simultaneous loading in both directions) and biaxial test (half of the load in one direction following the Laplace law) were selected as a representation of physiologically relevant loads...
July 2016: Annals of Biomedical Engineering
Nikhil Sindhwani, Zahra Liaquat, Iva Urbankova, Greetje Vande Velde, Andrew Feola, Jan Deprest
BACKGROUND AND OBJECTIVE: Immediate post-operative structural changes in implanted synthetic meshes are believed to contribute to graft related complications. Our aim was to observe in vivo dimensional changes at the pore level. METHOD: Two different polyvinylidine fluoride (PVDF) meshes, CICAT and ENDOLAP (Dynamesh, FEG Textiltechnik) were implanted in 18 female Sprague Dawley (n=9/group). The meshes (30×25mm(2)) were overlaid on a full thickness incision (2×1cm(2)) and sutured on the abdominal wall...
March 2015: Journal of the Mechanical Behavior of Biomedical Materials
E Reynvoet, S Van Cleven, I Van Overbeke, K Chiers, P De Baets, R Troisi, F Berrevoet
PURPOSE: The use of glue as mesh fixation in laparoscopic ventral hernia repair (LVHR) significantly reduces fixation associated morbidity. This experiment evaluates the intraperitoneal use of synthetic glue as single mesh fixation. METHODS: A total of 21 sheep were operated using a hernia model with two fascial defects of 2 cm(2) at the linea alba. One week later two polypropylene meshes (Dynamesh®) were implanted laparoscopically, using cyanoacrylate glue (Ifabond®) or conventional fixation (Securestrap®)...
August 2015: Hernia: the Journal of Hernias and Abdominal Wall Surgery
Gholamali Godazandeh, Meysam Mortazian
We report the cases of two patients diagnosed with Morgagni hernia who presented with nonspecific abdominal symptoms. Both underwent laparoscopic surgery that used a dual-sided mesh, polyvinylidene fluoride (PVDF; Dynamesh IPOM®). The procedures were successful and both patients were discharged with no complications. There was no recurrence in 18 months of follow up.Herein is the report of these cases and a literature review.
October 2012: Middle East Journal of Digestive Diseases
Masayuki Endo, Andrew Feola, Nikhil Sindhwani, Stefano Manodoro, Jarek Vlacil, Alexander Carl Engels, Filip Claus, Jan A Deprest
INTRODUCTION AND HYPOTHESIS: Our aim was to analyze the apparent contraction of meshes in vivo after abdominal wall reconstruction and evaluate histological and biomechanical properties after explantation. METHODS: Nine New Zealand female rabbits underwent repair of two full-thickness 25 × 30-mm midline defects in the upper and lower parts of the abdomen. These were primarily overlaid by 35 × 40-mm implants of a polyvinylidene fluoride (PVDF) DynaMesh (n = 6) or polypropylene meshes Ultrapro (n = 6) and Marlex (n = 6)...
June 2014: International Urogynecology Journal
Andrzej Jamry, Marek Jałyński, Lukasz Piskorz, Marian Brocki
INTRODUCTION: Formation of adhesions after laparoscopic hernia repair using the intra-peritoneal onlay mesh (IPOM) procedure can lead to intestinal obstruction or mesh erosion into intestinal lumen. The aims of this study included: measurement of adhesion formation with Dynamesh IPOM after laparoscopic intraperitoneal implantation, and assessment of the occurrence of isolated adhesions at the fastening sites of slowly absorbable sutures. MATERIAL AND METHODS: Twelve healthy pigs underwent laparoscopic implantation of 2 Dynamesh IPOM mesh fragments each, one was fastened with PDSII, and the other with Maxon sutures...
June 20, 2013: Archives of Medical Science: AMS
T Sommer, H Friis-Andersen
PURPOSE: To investigate mesh-related complications in patients undergoing laparoscopic ventral hernia repair using DynaMesh®. METHODS: In the period 1 January 2005 through 31 December 2010, 181 consecutive patients undergoing laparoscopic ventral hernia repair in our day surgery unit using DynaMesh® were entered prospectively in the National Danish Hernia Database. Data concerning abdominal reoperations after hernia repair were later collected on all 181 patients from the National Danish Health Registry...
October 2013: Hernia: the Journal of Hernias and Abdominal Wall Surgery
Jens Otto, E Kaldenhoff, R Kirschner-Hermanns, Thomas Mühl, Uwe Klinge
Use of textile structures for reinforcement of pelvic floor structures has to consider mechanical forces to the implant, which are quite different to the tension free conditions of the abdominal wall. Thus, biomechanical analysis of textile devices has to include the impact of strain on stretchability and effective porosity. Prolift(®) and Prolift + M(®), developed for tension free conditions, were tested by measuring stretchability and effective porosity applying mechanical strain. For comparison, we used Dynamesh-PR4(®), which was designed for pelvic floor repair to withstand mechanical strain...
April 2014: Journal of Biomedical Materials Research. Part A
L Martínek, J Dostalík, P Gunková, I Gunka, M Mazur
INTRODUCTION: Parastomal hernia is a very common complication after stoma formation. Current surgical procedures for repairing parastomal hernia have unsatisfactory results. The aim of this study was to evaluate our initial experience with laparoscopic prophylactic mesh placement at the time of stoma formation. MATERIAL AND METHODS: Four patients underwent laparoscopic abdominoperineal rectal cancer resection with prophylactic parastomal mesh placement. A specially designed mesh made of polyvinylidene fluoride with central funnel (Dynamesh IPST) was implanted using an intraperitoneal onlay technique...
April 2012: Rozhledy V Chirurgii: Měsíčník Československé Chirurgické Společnosti
M V Anurov, S M Titkova, A P Oettinger
PURPOSE: We aimed to compare the effectiveness of experimental middle hernia defect repair in regard to the transverse and longitudinal positioning of anisotropic lightweight surgical mesh. METHODS: The mechanical properties of fascial layers and surgical mesh DynaMesh(®)-PP Light were determined in two perpendicular directions under uniaxial tension. In 12 male Wistar rats, middle hernia defect was repaired by the sublay technique. In six animals, the mesh was positioned across (DLH group) and in the other six along (DLV group) the midline...
April 2012: Hernia: the Journal of Hernias and Abdominal Wall Surgery
Fetch more papers »
Fetching more papers... Fetching...
Read by QxMD. Sign in or create an account to discover new knowledge that matter to you.
Remove bar
Read by QxMD icon Read

Search Tips

Use Boolean operators: AND/OR

diabetic AND foot
diabetes OR diabetic

Exclude a word using the 'minus' sign

Virchow -triad

Use Parentheses

water AND (cup OR glass)

Add an asterisk (*) at end of a word to include word stems

Neuro* will search for Neurology, Neuroscientist, Neurological, and so on

Use quotes to search for an exact phrase

"primary prevention of cancer"
(heart or cardiac or cardio*) AND arrest -"American Heart Association"