Bulk-fill

OBJECTIVE: To measure degree of conversion (DC) of a flowable composite, microtensile bond strength (MTBS) to dentine in the snow-plow technique with/without preheating and temperature in the preheated composite. MATERIALS AND METHODS: For DC, snow-plow specimens of Filtek Ultimate Flowable (Flow) and Filtek Bulk Fill (Bulk) (3M) were prepared by light-curing composites simultaneously in standardized molds while in control groups light-curing was separate. DC of Flow was measured using micro-Raman spectroscopy...

BACKGROUND: The 24-month clinical performance of 3 commercially available flowable bulk-fill resin composites in Class III restorations was evaluated. MATERIAL AND METHODS: Forty-two patients, 27 females (64.3%) and 15 (35.7%) males, received at least 3 Class III restorations that never exceeded 4 mm depth and width. One hundred thirty-eight teeth, divided up into three groups (n=46), were randomly restored with Admira Fusion x-base (AFB), Estelite Bulk Fill Flow (EBF) and SDR flow+ (SDR) in one single increment...

OBJECTIVES: To assess the clinical performance of class II restorations performed by repeatedly preheated resin composite "RC" at 68°C up to ten times. METHODS: 105 patients were selected and randomized into three groups, each comprising 35 patients. Each patient was provided with a single class II Bulk-fill resin composite "BF-RC" posterior restoration based on the number of preheating cycles; group I (H0): The BF-RC was packed non-heated, group II (H1): BF-RC preheated once, and group III(H10): BF-RC preheated ten cycles...

PURPOSE: The purpose of the study was to investigate the impact of repolishing procedures on the color change of bulk-fill resin composites after being exposed to coffee. MATERIALS AND METHODS: Four bulk-fill resin composites (Filtek One bulk-fill, Tetric EvoCeram bulk-fill, Admira Fusion x-tra bulk-fill, Grandio SO x-tra bulk-fill) were tested. Sixty samples were prepared with each resin composite and were randomly divided into two groups: first one received the one-step polishing system (Optragloss) and the other group received the two-step polishing system (Nova Twist) (n=30)...

OBJECTIVE: This randomized, double-blind clinical investigation assessed the performance of two high-viscosity glass-ionomer systems and a bulk-fill composite in different cavity types. MATERIALS AND METHODS: In 146 participants, 360 (class I, II, and V) cavities were restored using three different materials (Equia Forte HT, Chemfill Rock, and SonicFill 2) with equal allocation. Using modified World Dental Federation criteria, restorations were assessed after 1 week, 6 months, and 18 months by an experienced examiner...

OBJECTIVES: The aim of this study was to compare the 2-year clinical performance of a bulk-fill composite resin and a nano-hybrid-filled composite resin in 6-12-year-old children in a split-mouth design. MATERIALS AND METHODS: This randomized, split-mouth, and double-blind study was conducted on 89 patients aged 6-12 years with caries on bilateral mandibular first molars. In a split-mouth design, restorations of mandibular permanent molars were completed with nano-hybrid organically modified ceramic (ORMOCER)-based bulk-fill composite resin Admira Fusion x-tra (Voco GmbH, Cuxhaven, Germany) and nano-hybrid composite Grandio (Voco, Cuxhaven, Germany)...

BACKGROUND: Composites with 0.2% chitosan nanoparticles (CSN) are used recently; however, this combination needs to be studied in different cavity designs. AIMS: The aim of the study was to compare the fracture resistance of maxillary premolars with different cavity geometries restored with different types of composite resins incorporated with 0.2% CSN. METHODS: About 130 extracted human single-rooted maxillary premolars were embedded in acrylic molds 2 mm below cementoenamel junction, divided into five groups for cavity preparations of standardized dimensions...

PURPOSE: To evaluate and compare the laboratory compressive strength (CS), flexural strength (FS), and diametral tensile strength (DTS) of Cention Forte and three bulk fill restorative materials. METHODS: A total of 168 specimens were prepared following the manufacturers' instructions and standards for testing CS, FS, and DTS. Mechanical properties of Cention Forte (LC-Cent) were compared to three commercial bulk-fill materials for posterior restorations: Fuji IX Extra (Fuji), Tetric PowerFill (TPF), and Equia Forte HT (Equia)...

OBJECTIVES: This study aimed to evaluate the effect of pomegranate solution ( Punica granatum ) on eroded dentin through antioxidant action, shear bond strength (SBS) and interface morphology. MATERIALS AND METHODS: The 10% pomegranate peel extract was prepared by the lyophilization method. Punicalagin polyphenol was confirmed by high-performance liquid chromatography. Antioxidant activity was evaluated by capturing the 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical...

PURPOSE: This research aimed to investigate fracture resistance of endodontically treated maxillary premolars restored using preheated thermo-viscous and fiber-reinforced bulk fill resin composite, in vitro. METHODOLOGY: Sixty sound human maxillary premolars were selected and divided randomly into 6 groups of ten teeth each (n = 10). Group 1; is the positive control with sound unprepared teeth (P), Group 2; is the negative control in which Mesio-occluso-distal (MOD) cavities were left unrestored (N), Group 3; includes the teeth restored by incremental packing with conventional nanohybrid composite (ChP), Group 4; includes teeth restored with short fiber reinforced bulk fill composite (EF), Group 5; includes teeth restored with preheated thermo-viscous bulk fill composite (VB), and Group 6; includes teeth restored using packable bulk fill composite (XF) Tested restorative materials were bonded with a universal adhesive in self-etch mode...

Interferometry is a vital tool for studying fundamental features in the quantum Hall effect. For instance, Aharonov-Bohm interference in a quantum Hall interferometer can probe the wave-particle duality of electrons and quasiparticles. Here, we report an unusual Aharonov-Bohm interference of the outermost edge mode in a quantum Hall Fabry-Pérot interferometer, whose Coulomb interactions were suppressed with a grounded drain in the interior bulk of the interferometer. In a descending bulk filling factor from ν_{b}=3 to ν_{b}≈(5/3), the magnetic field periodicity, which corresponded to a single "flux quantum," agreed accurately with the enclosed area of the interferometer...

BACKGROUND: Functional properties should be considered when selecting composites for restorations. With bulk-fill resin composites, the disadvantages of conventional composites were overcome regarding the increments necessitating the application of a 2 mm thick layer of resin and the amount of polymerization. The most significant advantage of bulk-fill resin composite is the possibility of applying the material in 4 mm layers. Multiple studies have examined the polymerization, mechanical, and adhesive properties of bulk-fill resin composites and proven them successful...

OBJECTIVES: To evaluate surface microhardness and gingival marginal adaptation of three different bulk-fill flowable resin composites (FB-RBCs) in Class V cavities with enamel or dentin margins before and after thermocycling (TMC). MATERIALS AND METHODS: Three available FB-RBCs were used; Palfique Bulk Flow (PaBF) (Tokuyama Dental), SDR Flow+ Bulk Fill Flowable (Dentsply Sirona), and I-Flow Bulk Fill (I-Dental). Thirty discs were prepared from each type of FB-RBCs...

OBJECTIVES: This study evaluated the clinical performance of bulk-fill resin composite systems with different viscosities in class II cavities. MATERIALS AND METHODS: A total of 80 class II restorations were performed with a single operator in 50 patients using four different bulk-fill resin composite materials: Filtek™ Bulk Fill, Heated Filtek™ Bulk Fill, G-aenial™ BULK Injectable, and SonicFill3. A double-blinded randomized clinical trial was designed to evaluate the two-year clinical performance of the four bulk-fill composite resins using modified FDI criteria...

In the chronology of polymer-based composite materials, flowable bulk-fill composites represent the most recent development. They enable a significant reduction in treatment time by being applied in larger increments of 4 to 5 mm. The aim of the investigation was to assess the polymerization quality and mechanical performance of a new formulation that has just entered the market and was still in experimental formulation at the time of the investigation, and to compare these results in the context of clinically established materials of the same category...

AIM: Insufficient evidence is available in quantifying the retention between the simplified and conventional non-balanced dentures. The aim of the study was to quantify, compare the maxillary denture retention and patient satisfaction between conventional and simplified removable non-balanced complete dentures. METHOD: The randomized clinical trial recruited 44 patients (n=22) with definitive criteria. Simplified and conventional non-balanced complete dentures were fabricated for the intervention groups...

OBJECTIVES: To evaluate the clinical performance of posterior restorations over wet and dry dentin with an etch-and-rinse adhesive after 36 months of clinical service. METHODS: Forty-five participants were recruited, each one had at least two posterior teeth that needed restoration. Ninety restorations were placed on Class I or Class II cavities. For the restoration protocol, a simplified etch-and-rinse adhesive (Adper Single Bond 2) was applied over wet (WD) or dry dentin (DD) and later restored with a bulk-fill composite (Filtek Bulk Fill) under rubber dam isolation...

OBJECTIVE: The purpose was to evaluate the degree of conversion (DC), internal adaptation (IA) and closed porosity (CP) of short-fiber reinforced resin composites (SFRC) associated with layered or bulk restorative procedures in deep MOD cavities. METHODS: Eighty third molars with standardized MOD cavities (5-mm-depth, 2.5-mm-width) were randomly divided into four groups and restored as follows: 1) bulk SFRC; 2) layered SFRC; 3) flowable bulk-fill resin-based composites (RBC); 4) layered conventional RBC...

OBJECTIVES: To evaluate polymerization efficiency of different bulk-fill resin-based composites (BFRBCs) cured by monowave and polywave light curing units (LCUs), by assessment the degree of conversion (DC) and Vickers microhardness (VMH) at different depths. METHOD AND MATERIALS: Two commercially available BFRBCs were used; Filtek One Bulk Fill Restorative (3M ESPE) (FOBF) and Tetric N-Ceram Bulk Fill (Ivoclar Vivadent) (TNBF). LCUs utilized were two light-emitting diodes (LEDs) LCUs; a monowave LED LCU (BlueLEX LD-105, Monitex) and a polywave LED LCU (Twin Wave GT-2000, Monitex)...

OBJECTIVE: The study aims to evaluate the shear bond and flexural strength fatigue behavior of yttrium-stabilized zirconia (4YSZ) repaired using different resin composites. MATERIALS AND METHODS: Cylindric specimens of 4YSZ were obtained for the bond strength (Ø = 6 mm, 1.5 mm of thickness) and biaxial flexural strength (Ø = 15 mm, 1 mm of thickness) fatigue tests and divided into 3 groups according to the repair resin composite: EVO (nanohybrid), BULK (bulk-fill), and FLOW (flowable)...