Ferroelectric

A design strategy boosts electrical properties of ferroelectric materials and devices.

Two-dimensional (2D) ferroelectric metals (FEMs) possess intriguing characteristics, such as unconventional superconductivity and the nonlinear anomalous Hall effect. However, their occurrence is exceedingly rare due to mutual repulsion between ferroelectricity and metallicity. In addition, further incorporating other features like ferromagnetism into FEMs to enhance their functionalities poses a significantly greater challenge. Here, via first-principles calculations, we demonstrate a case of an FEM that features a coexistence of room-temperature ferromagnetism, ferroelectricity, and metallicity in a thermodynamically stable 2D Os2 Se3 ...

Manipulating surface charge, electric field, and plasma afterglow in a non-equilibrium plasma is critical to control plasma-surface interaction for plasma catalysis and manufacturing. Here, we show enhancements of surface charge, electric field during breakdown, and afterglow by ferroelectric barrier discharge. The results show that the ferroelectrics manifest spontaneous electric polarization to increase the surface charge by two orders of magnitude compared to discharge with an alumina barrier. Time-resolved in-situ electric field measurements reveal that the fast polarization of ferroelectrics enhances the electric field during the breakdown in streamer discharge and doubles the electric field compared to the dielectric barrier discharge...

The liquid crystal molecule 3-fluoro-4-(3,4,5-trifluorophenyl)phenyl 2,6-difluoro-4-( trans -5-n-propyl-1,3-dioxane-2-yl)benzoate (DIO) has attracted considerable interest owing to its unique ferroelectric nematic phase and extraordinarily high dielectric constant. To expand the DIO series, novel analogs with 1,3-dioxane units converted to ester units (EST analogs) were synthesized, and their physical properties were characterized. The EST analogs exhibited ferroelectric phases similar to those of the corresponding DIO analogs...

Ferroelectric switching and retention performance of poly(vinylidene fluoride) (PVDF) thin films improve by the incorporation of unmodified smectite montmorillonite (MMT) clay nanodielectric. In the present study, an intercalated PVDF (clay/PVDF) thin film with edge-on β-crystallite is fabricated via a heat-controlled spin coating (HCSC) technique. This provides an efficient and simple way to fabricate the edge-on oriented crystallite lamellae with an electroactive β-phase, facilitating nanoscale ferroelectric switching at a lower voltage compared to the face-on orientation...

Pulsed high-intensity focused ultrasound (pHIFU) can induce sparse de novo inertial cavitation without the introduction of exogenous contrast agents, promoting mild mechanical disruption in targeted tissue. Because the bubbles are small and rapidly dissolve after each HIFU pulse, mapping transient bubbles and obtaining real-time quantitative metrics correlated to tissue damage are challenging. Prior work introduced Bubble Doppler, an ultrafast power Doppler imaging method as a sensitive means to map cavitation bubbles...

Autonomous Ultrasound Image Quality Assessment (US-IQA) is a promising tool to aid the interpretation by practicing sonographers and to enable the future robotization of ultrasound procedures. However, autonomous US-IQA has several challenges. Ultrasound images contain many spurious artifacts, such as noise due to handheld probe positioning, errors in the selection of probe parameters and patient respiration during the procedure. Further, these images are highly variable in appearance with respect to the individual patient's physiology...

In this work, the dielectric response of polycrystalline Ba3 CoSb2 O9 was studied as a function of temperature (30 to 900 °C) and frequency (10 Hz to 10 MHz). The triple perovskite Ba3 CoSb2 O9 was successfully synthesized and characterized for structural and dielectric properties. The Rietveld analysis of the X-ray diffractogram confirms the formation of a hexagonal phase with P 63 / mmc symmetry. This centrosymmetric 3(BaCo1/3 Sb2/3 O3 ) perovskite shows structural similarity to a prototypical non-centrosymmetric relaxor ferroelectric, PbMg1/3 Nb2/3 O3 ...

Dielectric electrostatic capacitors1 , due to their ultrafast charge-discharge capability, are attractive for high power energy storage applications. Along with ultrafast operation, on-chip integration can enable miniaturized energy storage devices for emerging autonomous microelectronics and microsystems2-5 . Additionally, state-of-the-art miniaturized electrochemical energy storage systems - microsupercapacitors and microbatteries - currently face safety, packaging, materials, and microfabrication challenges preventing on-chip technological readiness2,3,6 , leaving an opportunity for electrostatic microcapacitors...

The quest for high-performance piezoelectric materials has been synonymous with the pursuit of the morphotropic phase boundary (MPB), yet the full potential of MPBs remains largely untapped outside of the realm of ferroelectrics. In this study, we reveal a new class of MPB by creating continuous molecular-based solid solutions between centro- and noncentrosymmetric compounds, exemplified by ( tert -butylammonium)1- x ( tert -amylammonium) x FeCl4 (0 ≤ x ≤ 1), where the MPB is formed due to disorder of molecular cations...

While the 2D/3D heterojunction is an effective method to improve the power conversion efficiency (PCE) of perovskite solar cells (PSCs), carriers are often confined in the quantum wells (QWs) due to the unique structure of 2D perovskite, which makes the charge transport along the out-of-plane direction difficult. Here, a 2D/3D ferroelectric heterojunction formed by 4,4-difluoropiperidine hydrochloride (2FPD) in inverted PSCs is reported. The enriched 2D perovskite (2FPD)2 PbI4 layer with n = 1 on the perovskite surface exhibits ferroelectric response and has oriented dipoles along the out-of-plane direction...

Nanodots composed of multiferroic cobalt-substituted BiFeO3 , a ferroelectric ferromagnet at room temperature, are fabricated by pulsed laser deposition using anodized porous alumina as masks. The obtained nanodots are approximately 60 nm in diameter, more than 10 nm in thickness, and approximately 70 Gbit/in.2 in density. Piezoresponse and magnetic force microscopies show both ferroelectricity and ferromagnetism with a single-domain nature. It is also found that the dot with 190 nm diameter had multidomain vortex ferroelectric and magnetic structures indicating the strong magnetoelectric coupling...

Pyroelectric materials are naturally electrically polarized and exhibits a built-in spontaneous polarization in their unit cell structure even in the absence of any externally applied electric field. These materials are regarded as one of the ideal detector elements for infrared applications because they have a fast response time and uniform sensitivity at room temperature across all wavelengths. Crystals of the perovskite lead titanate (PbTiO3) family show pyroelectric characteristics and undergo structural phase transitions...

We have designed new chiral smectic mesogens with the -CH2 O group near the chiral center. We synthesized two unique rod-like compounds. We determined the mesomorphic properties of these mesogens and confirmed the phase identification using dielectric spectroscopy. Depending on the length of the oligomethylene spacer (i.e., the number of methylene groups) in the achiral part of the molecules, the studied materials show different phase sequences. Moreover, the temperature ranges of the observed smectic phases are different...

In this work, 10 nm scandium-doped aluminum nitride (AlScN) capacitors are demonstrated for the construction of the selector-free memory array application. The 10 nm Al0.7 Sc0.3 N film deposited on an 8-inch silicon wafer with sputtering technology exhibits a large remnant polarization exceeding 100 µC/cm2 and a tight distribution of the coercive field, which is characterized by the positive-up-negative-down (PUND) method. As a result, the devices with lateral dimension of only 1.5 μm show a large memory window of over 250% and a low power consumption of ~40 pJ while maintaining a low disturbance rate of <2%...

Dynamical tuning of the thermal conductivity in crystals, κ , is critical for thermal management applications, as well as for energy harvesting and the development of novel phononic devices able to perform logic operations with phonons. Such a desired κ control can be achieved in functional materials that experience large structural and phonon variations as a result of field-induced phase transformations. However, this approach is only practical within reduced temperature intervals containing zero-bias phase transition points, since otherwise the necessary driving fields become excessively large and the materials' performances are detrimentally affected...

Robust ferroelectricity in nanoscale fluorite oxide-based thin films enables promising applications in silicon-compatible non-volatile memories and logic devices. However, the polar orthorhombic (O) phase of fluorite oxides is a metastable phase that is prone to transforming into the ground-state non-polar monoclinic (M) phase, leading to macroscopic ferroelectric degradation. Here we investigate the reversibility of the O-M phase transition in ZrO2 nanocrystals via in situ visualization of the martensitic transformation at the atomic scale...

The discovery of various primary ferroic phases in atomically-thin van der Waals crystals have created a new two-dimensional wonderland for exploring and manipulating exotic quantum phases. It may also bring technical breakthroughs in device applications, as evident by prototypical functionalities of giant tunneling magnetoresistance, gate-tunable ferromagnetism and non-volatile ferroelectric memory etc. However, two-dimensional multiferroics with effective magnetoelectric coupling, which ultimately decides the future of multiferroic-based information technology, has not been realized yet...

The concept of multiphysics, where materials respond to diverse external stimuli, such as magnetic fields, electric fields, light irradiation, stress, heat, and chemical reactions, plays a fundamental role in the development of innovative devices. Nanomanufacturing, especially in low-dimensional systems, enhances the synergistic interactions taking place on the nanoscale. Light-matter interaction, rather than electric fields, holds great promise for achieving low-power, wireless control over magnetism, solving two major technological problems: the feasibility of electrical contacts at smaller scales and the undesired heating of the devices...

The ability of ferroelectric memristors to modulate conductance and offer multilevel storage has garnered significant attention in the realm of artificial synapses. On one hand, the resistance change of ferroelectric memristors mainly depends on the polarization reversal. On the other hand, the defects such as oxygen vacancies, which are inevitable presence during high-temperature processes, can undergo diffusion drift with the polarization reversal, thereby change the interface potential barrier. Thus, it is both desirable and necessary to investigate the synergistic effect of ferroelectricity and defects...