ethylene release rate

In order to achieve the high-value utilization of heavy tar for the production of enhanced-performance graphite foam carbon, the carbon mesophase was ready from the heavy component of low-temperature coal tar, and the coal tar was modified by styrene-butadiene-styrene (SBS), polyethylene (PE) and ethylene-vinyl-acetate (EVA) copolymers. The order degree of the carbonite mesophase was analyzed using a polarizing microscope test, Fourier transform infrared spectroscopy and X-ray diffraction to screen out the most suitable copolymer type and addition amount...

A 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO)-based derivative (PN-DOPO) combined with aluminium phosphates-coated sepiolite (Sep@AlPO4 ) was used to improve the flame retardance, thermal stability and mechanical performances of poly (ethylene oxide) (PEO)/poly (butylene adipate-co-terephthalate) (PBAT) blends. The synergistic effects of PN-DOPO and Sep@AlPO4 on flame-retarded PEO/PBAT composites were systematically discussed. Results indicated that introducing 5 wt% Sep@AlPO4 with 10 wt% PN-DOPO into PEO/PBAT achieved a V-1 rating for the UL-94 test and increased the limiting oxygen index value to 23...

The aim of this study was the molecular imprinting polymers (MIPs) assessment as a controlled release system of ciprofloxacin. The MIPs synthesis was performed by three different methods: emulsion, bulk, and co-precipitation. Lactic acid (LA) and methacrylic acid (MA) were used as functional monomers and ethylene glycol dimethacrylate as crosslinker. Also, nonimprinted polymers (NIPs) were synthesized. MIPs and NIPs were characterized by scanning electron microscopy, Fourier Transform Infrared Reflection, specific surface area, pore size, and release kinetics...

High-affinity K+ (HAK) transporters play essential roles in facilitating root K+ uptake in higher plants. Our previous studies revealed that GhHAK5a, a member of the HAK family, is crucial for K+ uptake in upland cotton. Nevertheless, the precise regulatory mechanism governing the expression of GhHAK5a remains unclear. The yeast one-hybrid screening was performed to identify the transcription factors responsible for regulating GhHAK5a, and ethylene response factor 9 (GhERF9) was identified as a potential candidate...

Functionalization of GO with an amphiphilic block copolymer is designed with an aim to enhance its biocompatibility, however, long copolymer chains can screen the blade effect of GO to sacrifice its antimicrobial activities. To solve this problem, low molecular weight of poly(ethylene glycol) (PEG), poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) and their block copolymer were respectively introduced onto GO via an isophorone diisocyanate modified GO as a intermediate, followed by a solvent evaporation of an oil-in-water emulsion treatment (SE treatment) to induce block copolymer into polymer micelle via phase separation to refresh the sharp edges of GO...

Amphiphilic comb-like random copolymers synthesized from poly(ethylene glycol) methyl ether methacrylate (PEGMMA) and stearyl methacrylate (SMA) with PEGMMA contents ranging between 30 wt% and 25 wt% were demonstrated to self-assemble into various well-defined nanostructures, including spherical micelles, wormlike micelles, and vesicle-like nanodomains, in anhydride-cured epoxy thermosets. In addition, the polymer blends of the comb-like random copolymer and poly(stearyl methacrylate) were prepared and incorporated into epoxy thermosets to form irregularly shaped nanodomains...

Development of a nanoscale drug delivery system that can simultaneously exert efficient tumor therapeutic efficacy while creating the desired antitumor immune responses is still challenging. Herein, we report the use of a manganese dioxide (MnO2 )-entrapping dendrimer nanocarrier to codeliver glucose oxidase (GOx) and cyclic GMP-AMP (cGAMP), an agonist of the stimulator of interferon genes (STING) for improved tumor chemodynamic/starvation/immune therapy. Methoxy poly(ethylene glycol) ( m PEG)- and phenylboronic acid (PBA)-modified generation 5 (G5) poly(amidoamine) dendrimers were first synthesized and then entrapped with MnO2 nanoparticles (NPs) to generate the hybrid MnO2 @G5- m PEG-PBA (MGPP) NPs...

Recently developed enzymes for the depolymerization of polyethylene terephthalate (PET) such as FAST-PETase and LCC-ICCG are inhibited by the intermediate PET product mono(2-hydroxyethyl) terephthalate (MHET). Consequently, the conversion of PET enzymatically into its constituent monomers terephthalic acid (TPA) and ethylene glycol (EG) is inefficient. In this study, a protein scaffold (1TQH) corresponding to a thermophilic carboxylesterase (Est30) was selected from the structural database and redesigned in silico...

A smart hydrogel loading multifunctional nanoparticles and anticancer drugs was designed to achieve synergistic therapy against tumors with high efficiency and specificity. The thermoresponsive injectable self-healing hydrogel was prepared through the Schiff base between aldehyde-functionalized poly(2-(2-methoxyethoxy) ethyl methacrylate)-co-oligo(ethylene glycol) methacrylate-co-2-hydroxyethyl methacrylate) (P(MEO2 MA-co-OEGMA-co-HEMA), APMOH) and hydroxypropyl chitosan (HPCS). The polydopamine-coated Fe/Mo-doped titanium dioxide nanoparticles (PDA@dTiO2 NPs) were prepared and dispersed into the hydrogel with anticancer drug doxorubicin (DOX)...

Currently, there is considerable interest in seeking an environmentally friendly technique that is neither thermally nor organic solvent-dependent for producing advanced polymer films for food-packaging applications. Among different approaches, plasma polymerization is a promising method that can deposit biodegradable coatings on top of polymer films. In this study, an atmospheric-pressure aerosol-assisted plasma deposition method was employed to develop a poly(ethylene glycol) (PEG)-like coating, which can act as a potential matrix for antimicrobial agents, by envisioning controlled-release food-packaging applications...

Coatings that prevent or decrease fouling are sought for many applications, including those that inhibit the attachment of organisms in aquatic environments. To date, antifouling coatings have mostly followed design criteria assembled over decades: surfaces should be well/strongly hydrated, possess low net charge, and maintain a hydrophilic character when exposed to the location of use. Thus, polymers based on ethylene glycol or zwitterionic repeat units have been shown to be highly effective. Unfortunately, hydrated materials can be quite soft, limiting their use in some environments...

Unsaturated polyester resins (UPR) are composed of prepolymers and styrene diluents, while the former are produced by co-polycondensation between diol, unsaturated diacid and saturated diacid. In this work, bio-based UPR prepolymers were synthesized from bio-based oxalic acid, itaconic acid, and ethylene glycol, which were then diluted with bio-based isosorbide methacrylate (MI). Meanwhile, the phenylphosphonate were introduced into the molecular chains of prepolymers to achieve intrinsic flame retardancy of bio-based UPR...

Microfluidics opens new avenues for materials engineering, as it enables scalable synthesis and provides highly controllable environments for reactions. Herein, we leverage microfluidics to engineer the properties of (bioactive) metal-phenolic network nanoparticles (MPN NPs), an emerging and highly modular nanoparticle platform for the incorporation and delivery of bioactive cargo. By varying the microfluidics operating parameters (flow rate ratio, total flow rate, temperature) and NP composition, we assemble MPN NPs, which consist of poly(ethylene glycol), biomacromolecules, metal ions, and polyphenols...

PURPOSE: The need for chronic systemic immunosuppression, which presents a host of acute risks to transplantation patients, remains the primary limitation for the translation of many cell therapies, such as insulin secreting cells for the treatment of type 1 diabetes. Trophoblasts are the professional tolerogenic cells of the placenta, and they secrete a range of soluble factors to induce antigen specific tolerance toward allogeneic fetal tissue during pregnancy, including extracellular vesicles...

These tests were carried out to find out how calcium and 1-MCP treatment affected the preservation of grapes, as grapes are highly susceptible to decay during post-harvest storage. The grapes were treated with 5 g/L calcium at the flowering stage, followed by 1 μL/L 1-MCP treatment after harvesting. When grapevines were treated with a combination of calcium and 1-MCP, the marketable fruit rate (At day 56 of storage, the 1-MCP + Ca2+ treatment group was still 93%, an increase of 29...

Conventional polymeric phase change materials (PCMs) have been widely used due to their high heat storage density, small temperature variation, and nontoxicity. However, the high flammability and unrecyclable problems restrict their applications in energy storage devices (ESDs). Although it is facile to introduce a flame retardant into phase change materials to improve fire resistance, the physical blending will deteriorate the mechanical performance and thermal stability of PCMs. Herein, flame-retardant solid-solid PCMs (FRPCMs) with intrinsic flame retardancy, phase change property, self-healing, and recyclability were synthesized by simultaneously integrating tetrabromobisphenol A (TBBPA) and poly(ethylene glycol) (PEG) into polyurethane network skeletons...

Antibody-drug conjugates consist of potent small-molecule payloads linked to a targeting antibody. Payloads must possess a viable functional group by which a linker for conjugation can be attached. Linker-attachment options remain limited for the connection to payloads via hydroxyl groups. A releasing group based on 2-aminopyridine was developed to enable stable attachment of para -aminobenzyl carbamate (PABC) linkers to the C21-hydroxyl group of budesonide, a glucocorticoid receptor agonist. Payload release involves a cascade of two self-immolative events that are initiated by the protease-mediated cleavage of the dipeptide-PABC bond...

Microfluidic chips have been widely applied in biology and medical research for stably generating uniform droplets that can be solidified into hydrogel microspheres. However, issues such as low microsphere yield, lengthy experimental processes, and susceptibility to environmental interference need to be addressed. In this work, a simple and effective method was developed to modify microfluidic chips at room temperature to improve the production performance of hydrogel microspheres. Numerical simulation-assisted experiments were conducted to comprehensively understand the effect of solution viscosity, hydrophilicity, and flow rate ratio on droplet formation during microsphere production...

In recent years, there has been an increase in the incidence of insect-borne diseases. Topically applied insect repellents are used to prevent these infectious diseases, but concerns of skin permeability and rapid evaporation rates have made way for alternative preventative methods. Encapsulation of insect repellents in polymeric materials allows for nonskin contact methods of repellent delivery with extended-release profiles without the need for reapplication. Poly(ethylene terephthalate) (PET) is widely used in textiles as well as food packaging and other single-use applications...

In this study, we analyzed the properties of amphiphilic alkyldi(methoxy poly(ethylene glycol) (MePEG)350-lactate) phosphates based on ethyl lactate, the monomethyl ether of poly(ethylene glycol)350, and alkyldichloro phosphates. Interestingly, these triesters combine two biodegradable bonds, -P(O)-O-C and -C(O)-O-C-, and include hydrophilic (MePEG350-lactate) and hydrophobic (R-aliphatic chain of alcohols) moieties. The properties of these esters resemble those of phospholipids. After being placed in an aqueous solution, they self-assembled...