Osseointegration

Massive unmelted Ti6Al4 V (Ti64) particles presented across all surfaces of additively manufactured Ti64 scaffolds significantly impacted the designed surface topography, mechanical properties, and permeability, reducing the osseointegration of the scaffolds. In this study, the proposed flowing acid etching (FAE) method presented high efficiency in eliminating Ti64 particles and enhancing the surface modification capacity across all surfaces of Ti64 scaffolds. The Ti64 particles across all surfaces of the scaffolds were completely removed effectively and evenly...

Dental implants have been clinically used for almost five decades with high success rates. In vitro research models used in implant dentistry are limited to two-dimensional experiments, which are reproducible and well adapted to evaluate a single parameter but do not reproduce the complexity of clinical settings. On the contrary, the in vivo research models using animals offer similar histological and anatomical features to humans, and tissue healing can be close to a clinical situation, but those models are usually accompanied with ethical concerns, and their outcomes could not be extrapolated to humans because of interspecies variabilities...

Achieving osseointegration is a fundamental requirement for many orthopaedic, oral, and craniofacial implants. Osseointegration typically takes three to 6 months, during which time implants are at risk of loosening. The aim of this study was to investigate whether osseointegration could be actively enhanced by delivering controllable electromechanical stimuli to the periprosthetic bone. First, the osteoconductivity of the implant surface was confirmed using an in vitro culture with murine preosteoblasts...

PURPOSE: To analyze the bone remodeling around the implant 10 years after disk-up sinus reamer(DSR)-based internal sinus floor elevation with implantation and to investigate the influence of different factors on implant retention. METHODS: The clinical and imaging data of patients undergoing DSR-based sinus floor elevation with simultaneous implantation were collected from the Department of Dental Implantology, Affiliated Hospital of Qingdao University from January 2008 to December 2011...

OBJECTIVE: The biomimetic coating on titanium surface affects the adhesion, proliferation, and differentiation of bone cells on the surface of implants. Naringin-7-O-Neohesperidoside (NRG) positively affects the proliferation and differentiation of bone cells, while inhibiting the formation of osteoclasts, thereby affecting the osteogenic effect. This study aimed to construct biomimetic coatings on pure titanium surfaces using layer by layer (LBL) self-assembly of NRGat different concentrations...

INTRODUCTION: Cell signaling pathways are the biological reactions that control cell functions and fate. They also directly affect the body reactions to implanted biomaterials. It is well-known that dental implants success depends on a successful integration with the alveolar bone: "osseointegration" which events comprise early and later responses to the implanted biomaterials. The early events are mainly immune-inflammatory responses to the implant considered by its microenvironment as a foreign body...

Alveolar bone quality at the implantation site affects the initial stability of dental implant treatment. However, the relationship between bone quality and osseointegration has yet to be evaluated. Herein, we aimed to investigate the effect of bone quality on dental implant stability in osseointegration formation changes. Patients underwent computed tomography imaging before dental implantation at the posterior. Hounsfield units were measured at the platform, middle, and tip sites. Implant stability was measured using resonance frequency analysis immediately and at 3 months postoperatively, in which the difference in implant stability quotients (ISQ) was defined as the change between primary and secondary fixation...

Osseointegrated transfemoral prostheses experience aseptic complications with an incidence between 3% and 30%. The main aseptic risks are implant loosening, adverse bone remodeling, and post-operative periprosthetic fractures. Implant loosening can either be due to a lack of initial (primary) stability of the implant, which hinders bone ingrowth and therefore prevents secondary stability, or, in the long-term, to the progressive resorption of the periprosthetic bone. Post-operative periprosthetic fractures are most often caused by stress concentrations...

Titanium (Ti) and its alloys have been widely employed in the treatment of orthopedics and other hard tissue diseases. However, Ti-based implants are bioinert and suffer from bacterial infections and poor osseointegration in clinical applications. Herein, we successfully modified Ti with a porous N -halaminated spermidine-containing polymeric coating (Ti-SPD-Cl) through alkali-heat treatment, surface grafting and chlorination, and it has both excellent antibacterial and osteogenic abilities to significantly enhance osseointegration...

Orthopedic implants are the most commonly used fracture fixation devices for facilitating the growth and development of incipient bone and treating bone diseases and defects. However, most orthopedic implants suffer from various drawbacks and complications, including bacterial adhesion, poor cell proliferation, and limited resistance to corrosion. One of the major drawbacks of currently available orthopedic implants is their inadequate osseointegration at the tissue-implant interface. This leads to loosening as a result of immunological rejection, wear debris formation, low mechanical fixation, and implant-related infections...

OBJECTIVE: This study aims to biomimetic design a new 3D-printed lattice hemipelvis prosthesis and evaluate its clinical efficiency for pelvic reconstruction following tumor resection, focusing on feasibility, osseointegration, and patient outcomes. METHODS: From May 2020 to October 2021, twelve patients with pelvic tumors underwent tumor resection and subsequently received 3D-printed lattice hemipelvis prostheses for pelvic reconstruction. The prosthesis was strategically incorporated with lattice structures and solid to optimize mechanical performance and osseointegration...

Constructing surface topography with a certain roughness is a widely used, non-toxic, cost-effective and effective method for improving the microenvironment of cells, promoting the proliferation and osteogenic differentiation of mesenchymal stem cells (MSCs), and promoting the osseointegration of grafts and further improving their biocompatibility under clinical environmental conditions. SIRT1 plays an important regulatory role in the osteogenic differentiation of bone marrow-derived MSCs (BM-MSCs). However, it remains unknown whether SIRT1 plays an important regulatory role in the osteogenic differentiation of BM-MSCs with regard to surface morphology...

INTRODUCTION: For individuals with limb loss, bone-anchored implants create a direct structural and functional connection to a terminal prosthesis. Here, we characterized the mechanical loads distal to the abutment during several functional performance tests in Service members with transfemoral (TF) limb loss, to expand on prior work evaluating more steady-state ambulation on level ground or slopes/stairs. METHODS: Two males with unilateral TF limb loss and two males with bilateral TF limb loss participated after two-stage osseointegration (24 and 12 months, respectively)...

Macrophages play a pivotal role in the immunological cascade activated in response to biomedical implants, which predetermine acceptance or rejection of implants by the host via pro- and anti-inflammatory polarisation states. The role of chemical signals in macrophage polarisation is well-established, but how physical cues regulate macrophage function that may play a fundamental role in implant-bone interface, remains poorly understood. Here we find that bone marrow-derived macrophages (BMDM) cultured on polyacrylamide gels of varying stiffness exhibit different polarisation states...

PURPOSE: Osseointegration (OI) is a novel alternative to traditional socket-suspended prostheses for lower-limb amputees, eliminating the socket-skin interface and allowing for weight bearing directly on the skeletal system. However, the stoma through which the implant attaches to the external prosthesis creates an ingress route for bacteria, and infection rates as high as 66% have been reported. The aims of this study are to classify infection management and long-term outcomes in this patient population to maximize implant salvage...

Autogenous bone transplantation is a prevalent clinical method for addressing bone defects. However, the limited availability of donor bone and the morbidity associated with bone harvesting have propelled the search for suitable bone substitutes. Bio-inspired scaffolds, particularly those fabricated using electron beam melting (EBM) deposition technology, have emerged as a significant advancement in this field. These 3D-printed titanium alloy scaffolds are celebrated for their outstanding biocompatibility and favorable elastic modulus...

Cyclosporine A (CSA) is an immunosuppressant that has been extensively studied for its side effects on inhibiting osseointegration of titanium implants. However, the impact of CSA on bone healing in postmenopausal osteoporosis remains unknown. Therefore, this study aimed to investigate the effect of CSA on bone repair in an ovariectomized (OVX) rat model through both in vitro and in vivo experiments. We examined the interventions of CSA on osteoblast progenitor cells MC3T3-E1 and assessed their effects on biological function using RT-qPCR, CCK-8 assay, alizarin red staining, and alkaline phosphatase staining...

OBJECTIVES: This study was aimed at assessing the effects of restraint stress and sandblasting; sandblasting with acid etching; Er-Cr: YSGG laser treatment; and propolis coating of implant surfaces on the implant stability quotient (ISQ) of grade 4 titanium dental implant osseointegration in model dogs. METHODS: A total of forty-eight CPTi dental implants were divided into four groups according to surface treatment: group A: sandblasting with acid etching; group B: sandblasting with Al2 O3 ; group C: Er-Cr: YSGG laser; and group D: propolis coating...

The use of dental implants to restore edentulous jaws has become commonplace. Usually, in the maxilla, following a tooth extraction, the height of alveolar bone decreases. This alteration in bone increases the risk of implants migrating into the sinus. In general, Caldwell-Luc and endoscopic surgery are performed to retrieve dental implants. In this case series, we collected data from 39 patients who had the complication of implant displacement within the maxillary sinus for 25 years. All the implants were removed using the Caldwell-Luc technique...

The clinical success of dental titanium implants is profoundly linked to implant stability and osseointegration, which comprises pre-osteoblast proliferation, osteogenic differentiation, and extracellular mineralization. Because of the bio-inert nature of titanium, surface processing using subtractive or additive methods enhances osseointegration ability but limits the benefit due to accompanying surface contamination. By contrast, laser processing methods increase the roughness of the implant surface without contamination...