Cup loosening

BACKGROUND: The use of dual mobility (DM) cups has increased quickly. It is hypothesized that femoral neck taper geometry may be involved in the risk of prosthetic impingement and DM cup revision. We aim to (1) explore the reasons for revision of DM cups or head/liners and (2) explore whether certain femoral neck characteristics are associated with a higher risk of revision of DM cups. METHODS: Primary total hip arthroplasties with a DM cup registered in the Dutch Arthroplasty Register between 2007 and 2021 were identified (n = 7603)...

INTRODUCTION: The combination of a central fracture-dislocation of the hip, acetabulum fracture, and neck of the femur fracture is a rare injury, with a few reports described in the literature. Guidelines regarding managing this type of injury in single or multiple stages, the requirement of acetabular augmentation with plates, metal rings or cages, and the implant selection in elderly patients are not adequately defined while planning a total hip arthroplasty (THA). The successful management of such a complex fracture pattern in an elderly patient with neurodegenerative disorder is described in our case report...

BACKGROUND AND PURPOSE: We aimed to evaluate the long-term predictive value of radiographic abnormality and/or hip pain assessed 5 years following primary total hip arthroplasty (THA) and the occurrence of revision for aseptic loosening between 5 and 25 years postoperatively. PATIENTS AND METHODS: We included all primary THAs performed between 1996 and 2011 (same uncemented cup, polyethylene-ceramic bearing, 28 mm head, cemented stem) and prospectively enrolled in the institutional registry, for whom baseline and follow-up radiographs were available...

Hip implants have a modular structure which enables patient-specific adaptation but also revision of worn or damaged friction partners without compromising the implant-bone connection. To reduce complications during the extraction of ceramic inlays, this work presents a new approach of a shape-memory-alloy-actuator which enables the loosening of ceramic inlays from acetabular hip cups without ceramic chipping or damaging the metal cup. This technical in vitro study exam-ines two principles of heating currents and hot water for thermal activation of the shape-memory-alloy-actuator to generate a force between the metal cup and the ceramic inlay...

INTRODUCTION: Performing total hip arthroplasty (THA) after failed internal fixation of proximal femoral fractures (PFF) is known to be associated with high rates of complications. Dual mobility cups (DMC) are known to lower dislocation events in high-risk patients. Very few reports investigated the outcomes of THA using DMC following failure of internal fixation for PFF. METHODS: This is a retrospective monocentric continuous study of 31 patients who underwent THA with DMC after failed internal fixation of PFF...

BACKGROUND AND PURPOSE: We conducted a systematic review and meta-analysis of RSA studies to investigate the early and long-term migration patterns of acetabular cups and the influence of implant factors on cup migration over time. METHODS: We performed a systematic search of PubMed, Embase, and Scopus databases to identify all RSA studies of cup migration following primary total hip replacement (THR). Proximal migration at 3 and 6 months, 1, 2, 5, and 10 years were considered for analysis...

OBJECTIVE: To review research advances of revision surgery after primary total hip arthroplasty (THA) for patients with Crowe type Ⅳ developmental dysplasia of the hip (DDH). METHODS: The recent literature on revision surgery after primary THA in patients with Crowe type Ⅳ DDH was reviewed. The reasons for revision surgery were analyzed and the difficulties of revision surgery, the management methods, and the related prosthesis choices were summarized...

We investigated whether trapezium bone reaction was different following implantation of a trapeziometacarpal total joint replacement with a hemispheric or a conical cup. Fifty-three Keri Medical Touch implants with hemispheric cup and 53 with conical cup were prospectively followed up radiographically. We compared radiographs taken immediately and one year after surgery for cup subsidence, tilt, heterotopic ossification and loosening. Cup subsidence of at least 1 mm was detected in 4% of cases for both cup types...

INTRODUCTION: Several implant manufacturers have developed ultra-porous metal substrate acetabular components recently. Despite this, data on clinical and radiographic outcomes remain limited. Our study evaluated postoperative patient-reported outcome measures (PROMs) and radiographic analyses in patients fitted with a novel acetabular porous-coated component. METHODS: A total of 152 consecutive patients underwent a total hip arthroplasty by a single orthopaedic surgeon...

The purpose of this study is to evaluate the results and intraoperative or postoperative complications of primary total hip arthroplasty (THA) using a contemporary tapered wedge titanium femoral component. A total of 213 THAs in 187 patients were followed up more than 5 years (mean, 102 months ; range, 60-150). The mean age at surgery was 64.2 years (range, 20?89 years). These patients were clinically evaluated using the JOA scoring system and radiographically host bone reactions around the implants, as well as femoral loosening...

The aim is to review clinical and radiological outcomes for all cases of primary and revision THA, combining a cemented stem (Exeter V40) with a dual mobility component from a different manufacturer (SERF Novae), to evaluate whether concerns regarding mixing components from different manufacturers are justified. We identified 72 hip replacements performed between May 2010 and December 2015 using the SERF Novae dual mobility cup with an Exeter V40 stem, the majority of which were cemented (90%) and revisions (58%)...

BACKGROUND: Porous tantalum components and augments have demonstrated short to midterm fixation stability in acetabular total hip arthroplasty (THA) revision but do not offer a novel option to decrease the postoperative dislocation rate. Recently, dual mobility (DM) cups have gained interest to decrease the prevalence of recurrent hip instability after revision hip arthroplasty, but this issue was not confirmed combined with use of tantalum reconstruction devices. Therefore, we did a retrospective study aiming to: 1) evaluate at a 5-year minimum follow-up period the dislocation rate (and other intra and postoperative complications), 2) assess radiographic results specifically looking at osseointegration and restoration of the hip center, 3) and also clinical results in a cohort of patients who underwent complex acetabular reconstruction with trabecular metal revision components associated with a cemented DM socket...

PURPOSE: A total of 894 hips were evaluated to describe the survivorship of Exeter cemented femoral stems and report the outcomes and complications of our 'Exeter- era', and there is no study from Central or Eastern Europe demonstrating similar results. METHODS: Between January 2000 and December 2009, a total of 894 hips were included who underwent Exeter universal and V40 femoral stems with a mean follow up of 13 years. Cemented Exeter low profile polyethylene cups were used in 889 patients (99...

PURPOSE: Revision of failed large head metal-on-metal (MoM) total hip arthroplasty (THA) is a challenging procedure particularly to reconstruct acetabular bone defect due to osteolysis and to achieve hip stability due to soft tissue damages, both potentially caused by adverse reaction to metal debris (ARMD). This study aimed to evaluate the outcome of dual mobility cup (DMC) constructs in revision THA for failed large head MoM bearings with a special attention to the occurrence of dislocation or re-revision...

INTRODUCTION: Acetabular impaction bone grafting (AIBG) has been used widely to reconstruct acetabular defects in complex primary and revision cases. The aim of this study was to look at the outcomes AIBG using either frozen irradiated femoral head allografts or autografts with uncemented acetabular cups. METHOD: We retrospectively reviewed 38 patients who had AIBG and uncemented cup reconstruction of the acetabulum performed between 2008 and 2021 for complex primary and revision surgery...

OBJECTIVE: To investigate the effectiveness of three-dimensional (3D)-printed hemi-pelvic prosthesis for revision of aseptic loosening or screw fracture of modular hemi-pelvic prosthesis. METHODS: Between February 2017 and January 2020, 11 patients with aseptic loosening or screw fracture of modular hemi-pelvic prosthesis were revised using 3D-printed hemi-pelvic prostheses. There were 7 males and 4 females with an average age of 44 years (range, 25-60 years). In the first operation, all patients underwent total tumor resection, modular hemi-pelvic prosthesis reconstruction, and autologous femoral head transplantation...

Background : Revision hip arthroplasty presents a surgical challenge, necessitating meticulous preoperative planning to avert complications like periprosthetic fractures and aseptic loosening. Historically, assessment of the accuracy of three-dimensional (3D) versus two-dimensional (2D) templating has focused exclusively on primary hip arthroplasty. Materials and Methods : In this retrospective study, we examined the accuracy of 3D templating for acetabular revision cups in 30 patients who underwent revision hip arthroplasty...

OBJECTIVES: This study aims to assess the short-term outcome of total hip arthroplasty for treating developmental dysplasia of the hip (DDH) using artificial intelligence (AI)-assisted three-dimensional (3D) preoperative planning technology. PATIENTS AND METHODS: Between January 2020 and July 2022, a total of 61 patients with DDH (31 males, 30 females, mean age: 59.2±10.4 years; range, 35 to 78 years) were retrospectively analyzed. The patients were divided into two groups as those in the observation group of AI-assisted 3D preoperative planning technology (n=34) and the control group of traditional two-dimensional X-ray template planning technology (n=27)...

Acetabular bone loss is not uncommon when performing revision total hip arthroplasty. This can create a challenge, especially on the acetabular side. In the present report, our patient presented with aseptic loosening of the acetabular component. The patient had a Paprosky IIIA acetabular defect that was reconstructed with stacked acetabular augments in addition to a highly porous acetabular cup. The remaining bone defects were addressed through the use of a calcium sulfate/hydroxyapatite bone graft substitute...

INTRODUCTION: Bone preservation and long-term survival are the main challenges in cementless total hip arthroplasty (THA). A good bone stock is especially important for adequate anchorage of the cup in revision cases. However, the optimal acetabular cup design for preserving good bone stock is still unclear. We aimed to compare clinical outcome, radiological alterations, migration, and wear at mid-term for two different cup types. MATERIALS AND METHODS: This retrospective matched-pair study was performed using the data for 98 THA cases treated with a monoblock cup composed of vitamin E-blended highly cross-linked polyethylene (VEPE; monoblock group) or a modular cup composed of a highly cross-linked polyethylene (HXLPE) without an antioxidant (modular group)...