Nano tube

Nanofibers are an emerging kind of nano-material, widely used in several application domains such as biomedicine, high-efficiency filtration media, precision electronics, and optical devices. Centrifugal spinning, which is a novel nanofiber production technology, has been widely studied. This paper proposes a structural parameter optimization design method of a bent-tube nozzle. The mathematical model of the spinning solution motion in the nozzle is first developed. The optimization function of the structure parameters of the bent-tube nozzle is then obtained by calculation...

Measurements of the electronic conductivity of lithium ion coatings are an important part of electrode development, particularly for thicker electrodes and in high power applications. A resistance measurement system with 46 probes has been used to characterise lithium ion electrodes, with different formulations and coat weights. The results show that the total through plane resistance is dominated by the interface resistance between the coating and the metal foil, rather than the volumetric resistivity of the coating...

The emergence of the wide-band-gap semiconductor Ga2 O3 has propelled it to the forefront of solar blind detection activity owing to its key features. Although various architectures and designs of Ga2 O3 -based solar blind photodetectors have been proposed, their performance still falls short of commercial standards. In this study, we demonstrate a method to enhance the performance of a simple metal-semiconductor-metal-structured Ga2 O3 -based solar blind photodetector by exciting acoustic surface waves. Specifically, we demonstrate that under a bias voltage of 100 mV and a radio frequency signal of 20 dBm, the responsivity and detectivity can increase from 2...

In this study, the nano-aluminum powder was reinforced with a hybrid of copper and graphene nanoplatelets (GNPs). The ratios of GNPs were 0 wt%, 0.4 wt%, 0.6 wt%, 1.2 wt% and 1.8 wt%. To avoid the reaction between aluminum and graphene and, consequently, the formation of aluminum carbide, the GNP was first metalized with 5 wt% Ag and then coated with the predetermined 15 wt% Cu by the electroless coating process. In addition, the coating process was performed to improve the poor wettability between metal and ceramic...

Due to a lack of technologies that harvest green and sustainable energy, unutilized compressed air energy during the operation of pneumatic systems is wasted. Liquid-solid triboelectric nano-generators (L-S TENGs) have been widely used as an advanced technology with broad development prospects due to their advantages of a simple structure and long service life. Among them, liquid-solid triboelectric nanogenerators with tube structures have great potential for coupling multiple physical effects and integrating them into a single device...

A key requirement for evaluating the safety of nano-enabled water treatment devices is measuring concentrations of insoluble nanomaterials released from devices into water that may be ingested by consumers. Therefore, there is a need for simple technique that uses commonly available commercial laboratory techniques to discriminate between nanoparticles and dissolved by-products of the nanomaterial (e.g., ionic metals). Such capabilities would enable screening for particulate or dissolved metals released into water from nanomaterial-containing drinking water contact materials (e...

BACKGROUND/AIMS: All body functions are activated, synchronized and controlled by a substantial, complex network, the nervous system. Upon injury, pathophysiology of the nerve injury proceeds through different paths. The axon may undergo a degenerative retraction from the site of injury for a short distance unless the injury is near to the cell body, in which case it continues to the soma and undergoes retrograde neuronal degeneration. Otherwise, the distal section suffers from Wallerian degeneration, which is marked by axonal swelling, spheroids, and cytoskeleton degeneration...

High nitrate concentration in water can lead to eutrophication and the disruption of healthy aquatic ecosystems. Additionally, in the human digestive system, it has the potential to be reduced to nitrite, which can be damaging to people's physical health. Catalytic hydrogenation of nitrate is one of the strategies for removing nitrate from water. Using A520E resin as support, we prepared Pd/Cu nano-catalyst (Pd/Cu@A520E) according to a liquid phase reduction method. A520E could improve the transfer process of nitrate in the solution to the activity sites of Pd/Cu nanoparticles, thus increase the reaction rate of nitrate reduction...

The structural characteristics of hollow carbon nanostructures (HCNs) result in intriguing physicochemical properties and various applications, especially for electrochemical energy storage applications. However, the currently solvent-based template methods to prepare HCNs are still far from meeting the facile, environment-friendly, and scalable demand. Herein, we explored a general and facile solvent-free block copolymer self-assembly approach to prepare various hollow hard carbon nanostructures, including hollow carbon nanofibers, hollow carbon Janus nanotadpoles, hollow carbon spheres, etc ...

Due to their enormous potential to be navigated through complex biological media or narrow capillaries, microrobots have demonstrated their potential in a variety of biomedical applications, such as assisted fertilization, targeted drug delivery, tissue repair, and regeneration. Numerous initial studies have been conducted to demonstrate the biomedical applications in test tubes and in vitro environments. Microrobots can reach human areas that are difficult to reach by existing medical devices through precise navigation...

A comprehensive study has been carried out by utilizing the molecular dynamics technique in order to investigate the behavior of the N-(1-hexylheptyl)-N'-(2-phenylpropanoicacid)-perylene-3,4,9,10-tetracarboxylicbisimide (PAP) molecules in the n-heptane/toluene solution as well as the role of the bare and functionalized single-wall carbon nanotubes (SWCNTs) with the carboxyl groups (-COOH) on the aggregation of PAP molecules. It was found that the CNTs benefit two mechanism of steric hindrance and adsorbing the PAP molecules to suppress the affinity of PAP molecules to association...

d-Gluconic acid monohydrate - DGAMH crystals are grown in a period of 61 days by using the customary slow evaporation method with a, b and c as 8.4309, 5.409 and 10.4071 in Å units; β as 96.87°; monoclinic system, space group as P21 . The material is an anticancer stipulation to inhibit them with the docked score of the DGAMH as -6.0 and -7.1 for both cases. Considering the mechanic behaviour of the DGAMH; the n as 7.57 of the DGAMH - work hardening coefficient value as Reverse ISE (indentation size effect) response for DGAMH...

INTRODUCTION: Transistors are the fundamental electronic component integrated into electronic devices' chips Carbon Nano Tube (CNT) based field. METHODS: Effect Transistor (FET) is a promising component for next-generation transistor technologies; as it has high carrier mobility, device stability, and mechanical flexibility. Nevertheless, some shortcomings in the CNT FET's design prevent it from providing the best performance while preserving thermal stability. RESULTS: The structure and functionality of transistors with Double-Gate (DG) devices, which use carbon nanotubes as active channel regions, have been examined by the authors of this study...

High grade serous ovarian carcinoma (HGSOC) accounts for ~ 70% of ovarian cancer cases. Non-invasive, highly specific blood-based tests for pre-symptomatic screening in women are crucial to reducing the mortality associated with this disease. Since most HGSOCs typically arise from the fallopian tubes (FT), our biomarker search focused on proteins found on the surface of extracellular vesicles (EVs) released by both FT and HGSOC tissue explants and representative cell lines. Using mass spectrometry, 985 EV proteins (exo-proteins) were identified that comprised the FT/HGSOC EV core proteome...

Topographical cues on materials can manipulate cellular fate, particularly for neural cells that respond well to such cues. Utilizing biomaterial surfaces with topographical features can effectively influence neuronal differentiation and promote neurite outgrowth. This is crucial for improving the regeneration of damaged neural tissue after injury. Here, we utilized groove patterns to create neural conduits that promote neural differentiation and axonal growth. We investigated the differentiation of human neural stem cells (NSCs) on silicon dioxide groove patterns with varying height-to-width/spacing ratios...

Limitations in the current clinical management of critical-sized osseous defects have driven the need for multifunctional bone constructs. The ideal bone scaffold should possess advanced microarchitecture, well-defined pore interconnectivity, and supply biological signals, which actively guide and control tissue regeneration while simultaneously preventing post-implantation complications. Here, a natural medicine-based localized drug delivery from 3D printed scaffold is presented, which offers controlled release of curcumin, piperine from nano-sized polymeric micelles, and burst release of antibacterial carvacrol from the coating endowing the scaffold with their distinct, individual biological properties...

Laser-induced surface structuring is a promising method to suppress electron mulitpacting in the vacuum pipes of particle accelerators. Electrons are scattered inside the rough surface structure, resulting in a low Secondary Electron Yield (SEY) of the material. However, laser processing of internal pipe surfaces with a large aspect ratio is technologically challenging in terms of laser beam guidance and focusing. We present a 532 nm ultrashort-pulse laser setup to process the inner parts of 15 m long beam vacuum tubes of the Large Hadron Collider (LHC)...

A nano vacuum tube which consists of a vacuum transistor and a nano vacuum chamber was demonstrated. For the device, a vacuum region is an electron transport channel, and a vacuum is a tunneling barrier. Tilted angle evaporation was studied for the formation of the nano level vacuum chamber structure. This vacuum tube was ultraminiaturized with several tens of 10-18 L scale volume and 10-6 Torr of pressure. The device structure made it possible to achieve a high integration density and to sustain the vacuum state in various real operations...

The health benefits of thymoquinone (TQ) have been a significant focus of numerous studies. However, more research is needed to ascertain whether its nano-form can effectively treat or prevent chronic diseases. In this study, we investigated how thymoquinone and its nanoparticles can mitigate liver damage induced by diazinon in male Wistar rats and explored the intracellular mechanisms involved. Forty-two Wistar male rats ( n = 42) were randomly allotted into seven groups. Group 1 served as the control. Group 2 (vehicle) consisted of rats that received corn oil via a gastric tube daily...

Small extracellular vesicles (sEVs) are promising for cell-based cardiac repair after myocardial infarction. These sEVs encapsulate potent cargo, including microRNAs (miRs), within a bilayer membrane that aids sEV uptake when administered to cells. However, despite their efficacy, sEV therapies are limited by inconsistencies in the sEV release from parent cells and variability in cargo encapsulation. Synthetic sEV mimics with artificial bilayer membranes allow for cargo control but suffer poor stability and rapid clearance when administered in vivo ...